3
BATTERIES
The Fireeld Heavy Duty Flashlight Foregrip is powered by two CR123A batteries.
To insert or remove the battery:
1) Rotate the battery cap (7) counterclockwise until it separates from the grip/battery compartment (6).
2) Insert both CR123A batteries into the compartment (6), with the positive end rst.
3) Replace the battery cap (7) onto the grip/battery compartment (6). To tighten, rotate the battery cap
clockwise until xed rmly. Do not over tighten.
MOUNTING
The Fireeld Heavy Duty Flashlight Foregrip has a built-in weaver/picatinny
mount designed to be mounted on the bottom half of a quad rail. The
foregrip provides better stability and support. Before mounting the foregrip
onto your rearm, be sure the rearm is unloaded and safe to handle.
To mount:
1) Loosen the mount by rotating the mount nut (4) counter clockwise.
2) Attach the mount to the bottom half of your rearm’s quad rail by
aligning the crossbolt (3) between one of the quad rail grooves.
3) Tighten the mount nut clockwise. Determine if the foregrip position is
comfortable and that the rearm is balanced. If not, remove the foregrip and
reposition.
4) Finally, insert the provided allen wrench through one of the holes in the mount nut. Use the allen key
as leverage to tighten the mount nut until it is securely attached to the rearm. Do not over tighten.
