4
Part 1 - INSTALLATION INSTRUCTIONS
1 - GENERAL INFORMATION
This canopy hood is designed to e fitted into ca inets or chimney cooker hoods,
placed a ove a hotplate. It can e used either in the extraction mode (ducted to the
outside) or in the recirculation mode (internal recycling). Before st rting the
inst ll tion, consider tion should be given to the difficulties to be found during
inst ll tion. The inst ll tion work must be undert ken by qu lified nd
competent person in conformity to the rules concerning the ev cu tion of
cont min ted ir. The m nuf cturer discl ims ll li bility for ny d m ge or
injury c used s result of not following the instructions for inst ll tion
cont ined in the following text.
2 - SAFETY WARNINGS
2.1 - When used in the extr ction mode, the cooker hood ducting must not be connected to
flue which is used for exh usting fumes from ppli nces supplied with energy other
th n electric, such s centr l he ting flue or w ter he ting flue.
2.2 - Before connecting to the m ins supply ensure th t the m ins volt ge corresponds with
the volt ge on the r ting pl te inside the hood.
2.3 - Connect the cooker hood to the m ins vi bipol r switch which h s 3mm cle r nce
between the cont cts.
2.4 - The device does not require e rthing, s it is double-insul ted.
2.5 - When inst lled, the hood must be positioned t le st 65 cm bove the hotpl te.
2.6 - Never do fl mbé cooking under this cooker hood.
2.7 - Never le ve frying p ns un ttended during use s overhe ted f t nd oil m y c tch fire.
2.8 - Before c rrying out ny kind of m inten nce or cle ning, disconnect the hood from the
m ins supply.
2.9 - If the room where the cooker hood is to be used cont ins fuel burning ppli nce such
s centr l he ting boiler then this must be of the room se led or b l nced flue type.
If other types of flue or ppli nce re fitted, ensure th t there is n dequ te supply of
ir into the room. When the cooker hood is used in conjunction with ppli nces supplied
with energy other th n electric, the neg tive pressure in the room must not exceed 0,04
mb r to prevent fumes being dr wn b ck into the room by the cooker hood.
3 - INSTALLATION
The following scheme has to e o served:
3.1 - Installation of the uilt-in group
3.2 - Set the hood for recirculation or evacuation
3.3 - Connect the hood to the mains supply and ensure that it works properly
