Firesense ULC-PY54-C-E Manuale utente
WARNING
FOR YOUR SAFETY
1. Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage.
2. Read the installation, operation, and
maintenance instructions thoroughly
before installing or servicing this
equipment.
3. Failure to follow these instructions
could result in fire or explosion, which
could cause property damage, personal
injury, or death.
WARNING
For Outdoor Use Only
ATTACH YOUR
RECEIPT HERE
Keep a copy of your proof of
purchase or order confirmation
which will be needed if you
need to contact us about
warranty coverage.
Purchase Date:
Conforms to ANSI STD Z21.97-2014,
Certified to CSA STD 2.41-2014 Outdoor decorative gas appliances
WARNING
This product can expose you to chemicals including
Carbon Monoxide, Lead, Chromium (hexavalent
compounds), Di(2-ethylhexyl) phthalate (DEHP) and
Diisononyl phthalate (DINP), which are known to the
State of California to cause cancer and birth defects
or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
*ELECTRONIC IGNITER!
Requires AAA Battery (not included)
Installation Precaution
This fire pit requires a minimum 18 inches of cross-ventilation in all directions.
Failure to provide proper ventilation can void the warranty.
Burner #: ULC-PY54-C-E
Assembly Instruction
Missing pieces, need help with assembly or have broken parts?
Please reach out to our customer service team directly via email (quickest option) or phone between
10:00am – 6:00pm Monday through Friday (EST).
Information we need: copy of original PO, shipping address (for new parts), your contact information
and pictures of the issue.
Email – [email protected]
Phone – 248-606-9545
UPC:730050168817
TABLE OF CONTENTS
Page 2
Page 2
Page 3
Page 4
Pages 5-8
Pages 9-12
Pages 13-15
Page 16
Page 17
Table of Contents
Before You Begin
Package Contents
Safety Information
Assembly
Operating Instructions
Conversion to Natural Gas
Care and Maintenance
Troubleshooting
2
BEFORE YOU BEGIN
Please read and understand this entire manual before attempting to assemble, operate or install ththis appliance.
This manual contains important information about the assembly, operation and maintenance of this LPG fire
pit. General safety information is presented in the first few pages and is also located throughout this manual.
Keep this manual for future reference and to educate new users of this appliance.
3
PART DESCRIPTION QUANTITY
Removable Burner Cover 1
Burner 1
Table Top 1
Front Door Panel 1
Side Panels 2
Back Panel 1
Gas Tank Support Bar 1
Gas Tank Support Ring 1
Protective Cover 1
1
Fire Glass
HARDWARE CONTENTS
B
A
C
D
E
F
G
H
I
J
Wrench
Qty: 1
S
Hex Key
Qty: 1
R
U
Plastic Cap (M8)
Qty: 4
L
Stud 8x30mm
Qty: 5
(4 for assembly +1 extra)
M
Washer/Spring Washer/Nut
(8mm)
Qty: 5
(4 for assembly +1 extra)
N
Bolt 6x25mm
Qty: 9
(8 for assembly +1 extra)
O
Bolt 6x18mm
Qty: 4
(3 for assembly +1 extra)
P
Washer 6mm
Qty: 12
(11 for assembly +1 extra)
H
G
J
I
T
Screwdriver
Qty: 1
B
A
C
F
E
E
D
Also required but not included:
AAA Battery (install by unscrewing igniter button)
PACKAGE CONTENTS
4
SAFETY INFORMATION
This appliance has been tested to and
complies with the ANSI Z21.97-2014, Outdoor
Decorative Gas Appliances CGA CR 97-003
Outdoor Gas Fireplaces. The installation must
conform to local codes or in the absence of
local codes to the National Fuel Gas Code.
ANSI Z223.1. This manual contains important
information about the assembly, operation
and maintenance of this fire pit. General
safety information is presented in these first
few pages and is also located throughout the
manual. Keep this manual for future reference
and to educate new users of this product.
This manual should be read in conjunction
with the labeling on the product. Safety
precautions are essential when any
mechanical or propane fueled equipment is
involved. These precautions are necessary
when using, storing, and servicing. Using the
equipment with the respect and caution
demanded will reduce the possibilities of
personal injury or property damage. The
following symbols (shown below) are used
extensively throughout this manual. Always
heed these precautions, as they are essential
when using any mechanical or propane
fueled equipment.
DANGER
EXPLOSION—FIRE HAZARD
•
Keep solid combustibles, such as building
materials, paper, or cardboard a safe distance
away from the fire pit as recommended by the
instructions.
•
Provide adequate clearances around air
openings into the combustion chamber. Never
use the fire pit in spaces which do or may
contain volatile or airborne combustibles, or
products such as gasoline, solvents, paint
thinner, dust particles, or unknown chemicals.
•
During operation, this appliance can be a source
of ignition. Keep fire pit area clear and free from
combustible materials, gasoline, paint thinner,
cleaning solvents and other flammable vapors
and liquids. Do not use fire pit in areas with high
dust content. Minimum fire pit clearances from
combustible materials: 2 feet (24 inches) from
the sides & 2 feet (24 inches) from the rear, 6
feet (72 inches) from ceiling.
•
Never store propane near high heat, open
flames, pilot lights, direct sunlight, other ignition
sources or where temperatures exceed 120
degrees F (49 degrees C).
•
Propane vapors are heavier than air and can
accumulate in low places. If you smell gas, leave
the area immed iately.
•
•
Never install or remove a propane cylinder
while the fire pit is lighted, or near flame, pilot
lights, or other ignition sources or while fire pit is
hot to the touch.
This fire pit is red hot during use and can ignite
flammables too close to the burner. Keep
flammables at least 6 feet (72 inches) from top
and 2 feet (24 inches) from sides. Keep gasoline
and other flammable liquids and vapors well
away from fire pit.
•
Store the propane cylinder outdoors in a well
ventilated space out of the reach of children.
Never store the propane cylinder in an enclosed
area (house, garage, etc.). If fire pit is to be
stored indoors, disconnect the propane cylinder
for outdoor storage.
WARNING
Failure to comply with the precautions and
instructions provided with this fire pit can
result in death, serious bodily injury and
property loss or damage from hazards of
fire, explosion, burn, asphyxiation, and/
or carbon monoxide poisoning. Only
persons who can understand and follow the
instructions should use or service this fire pit.
WARNING
We cannot foresee every use which may be
made of our fire pit. Check with your local fire
safety authority if you have questions about
fire pit use. Other standards govern the use of
fuel gases and heat producing products for
specific uses. Your local authorities can advise
you about these. If no local codes exist, follow
National Fuel Gas Code, ANSI Z223.1. In
Canada, installation must conform to local
codes. If no local codes exist, follow the
current National standards of CANADA CAN/
CGA-B 149.2.
WARNING
Improper installation, adjustment, alteration,
service or maintenance can cause property
damage, injury or death. Read the installation,
operation and maintenance instructions
thoroughly before installing or servicing this
equipment.
WARNING
Do not store or use gasoline or other
flammable vapors and liquids in the vicinity
of this or any other appliance. An LP-cylinder
not connected for use shall not be stored in
the vicinity of this or any other appliance.
DANGER
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame
3. If odor continues, keep away from
the appliance and immediately call your
gas supplier or fire department.
WARNING / DANGER
WARNING/DANGER indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING:
FOR OUTDOOR USE ONLY
CARBON MONOXIDE HAZARD
•
This fire pit is a combustion appliance. All
combustion appliances produce carbon
monoxide (CO) during the combustion process.
This product is designed to produce extremely
minute, non-hazardous amounts of CO if used
and maintained in accordance with all warnings
and instructions. Do not block air flow into or
out of the fire pit.
•
Carbon Monoxide (CO) poisoning produces
flu-like symptoms, watery eyes, headaches,
dizziness, fatigue and possibly death. You can’t
see it and you can’t smell it. It’s an invisible
killer. If these symptoms are present during
operation of this product get fresh air
immediately!
•
For outdoor use only. Using
this fire pit in an enclosed
space can kill you. Never use this
fire pit in an enclosed space such as a camper,
tent, home, or other unventilated or enclosed
area.
•
This fire pit consumes air (oxygen). Do not use
in unventilated or enclosed areas to avoid
endangering your life.
WARNING
•
This fire pit is fueled by propane gas. Propane gas
is invisible, odorless, and flammable. An odorant
is normally added to help detect leaks and can be
described as having a "rotten egg" smell. The
odorant can fade over time so leaking gas is not
always detectable by smell alone.
•
Propane gas is heavier than air and leaking
propane will sink to the lowest level possible. It
can ignite by ignition sources including matches,
lighters, sparks, or open flames of any kind many
feet away from the original leak. Use only
propane gas set up for vapor withdrawal.
•
Store or use propane gas in compliance with
local ordinances and codes or with ANSI/NFPA
58. Turn off propane when not in use.
Solid fuels shall not be burned in this
appliance.
WARNING
SAFETY INFORMATION
5
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present.
Place all parts on a soft, level surface for assembly. NOTE: it is recommended to use TWO PEOPLE to assemble this gas fire
pit. Estimated assembly time: 60 minutes. | Do NOT overtighten hardware!
1
Hardware: N Bolt (6x25mm) x 8
P Washer (6mm) x 8
1
N
P
2
2
Hardware: O Bolt (6x18mm) x 2
P Washer (6mm) x 2
Locate 4 Panels D/E/F. NOTE: There is a hole at the bottom of
each Side Panel E. The hole should face DOWN. Place a
Washer P on each of 8 Bolts N and insert through holes in
sides of Side Panels into the holes of Leg Panels D/F.
Tighten all Bolts N with Hex Key S.
E
E
F
D
Leg
O
P
ASSEMBLY
Once Side Panels/Front Door Panel/Back Panel have been
secured, turn it over. Then attach Gas Tank Support bar G to
Side Panels E by aligning holes in Gas Tank Support bar with
holes in the bottom of Side Panels. Insert bolt O through
Washer Pinto holes and tighten with Hex Key S.
6
ASSEMBLY
3
Fit bracket end of Gas Tank Support Ring H over Gas Tank
Support Bar G and align hole on front of Gas Tank Support
Ring with holes at the bottom of Front Door Panel D. Insert
Bolt O through Washer P and then through hole. Tighten with
Hex Key S.
Hardware: O Bolt (6x18mm) x1
P Washer (6mm) x1
4
Hardware: L Stud (8x30mm) x 4
M Washer/Spring Washer/Nut (8mm) x 4
U Plastic Cap x 4
3
4
D
D
O
P
U
M
L
Place Table Top C upside-down on a non-abrasive surface.
Screw 4 Studs L into the holes on the Table Top using
Screwdriver T. Then carefully place the upside-down fire pit
base on the Table Top and align the holes in the top of the
Legs with the Studs previously installed in the Table Top.
Place the holes over the Studs and secure each corner with
Washer/Spring Washer/Nut M as illustrated. Tighten with
Wrench R. Then place Plastic Caps U over Nuts.
WARNING:
This fire pit is constructed of aluminum, a
relatively soft, flexible metal. Never sit,
stand, or lean heavily on the top of the fire
pit, which can cause bending or warping.
7
ASSEMBLY
5Carefully turn the assembled fire pit back upright.
Place the Burner B into the hole in the Table Top C. Make sure
the Control Knob on the Burner faces the Front Door Panel D.
6
Pour the Fire Glass J around the Burner. Be careful not to
obstruct pilot light housing. Put the Removable Burner
Cover A on the Burner.
When the fire pit is NOT in use, or after use, when the fire
pit has cooled COMPLETELY, cover it with the Protective
Cover I. DO NOT PUT THE PROTECTIVE FIRE PIT COVER
ON A HOT FIRE PIT.
5
6
D
I
J
Unscrew the igniter button and insert a AAA Battery with
positive end facing out. Screw the button back onto the control
panel.
8
7Connect hose and regulator to cylinder. The propane gas and
cylinder are sold separately. Use a standard 20lb propane
cylinder only.
Use this fire pit only with a propane vapor withdrawal supply
system. See chapter 5 of the standard storage and handling of
liquefied petroleum gas, ANSI/NFPA 58. Your local library or fire
department should have this book.
Storage of an appliance indoors is permissible only if the cylinder
is disconnected and removed from the appliance. A cylinder must
be stored outdoors in a well-ventilated area out of the reach of
children. A disconnected cylinder must have dust caps tightly
installed and must not be stored in a building, garage or any other
enclosed area. The maximum inlet gas supply pressure: 250 PSI,
the minimum inlet gas supply pressure: 5 PSI.
The minimum hourly of 10,000 BTU is required input rating for a
fire pit for automatic operation at ratings less than full input rating.
The pressure regulator and hose assembly supplied with the
appliance must be used.
The installation must conform with local codes, or in the absence
of local codes, with national fuel gas code, ANSI Z223.1/NFPA54,
natural gas and propane Installation Code, CSA B 149.1, or propane
storage and handling code, B149.2.
7
7
7
ASSEMBLY
9
OPERATING INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE. IT IS INTENDED FOR RESIDENTIAL USE ONLY.
A dented, rusted or damaged propane cylinder may be hazardous and should be checked by your cylinder supplier.
Never use a propane cylinder with a damaged valve connection.
The propane cylinder must be constructed and marked in accordance with the specifications for LP gas cylinders of the
U.S. Department of Transportation (DOT) or the standard for cylinders, spheres and tubes for transportation of dangerous
goods and commission, CAN/CSA-B339.
The cylinder must have a listed overfilling prevention device.
The cylinder used must include a collar to protect the cylinder valve.
Never connect an unregulated propane cylinder to the fire pit.
Attach regulator to cylinder. Complete attachment. Install cylinder.
• Do not store a spare LP gas cylinder under or near this appliance;
•Never fill the cylinder beyond 80 percent full;
• Place the dust cap on the cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the
cylinder valve that is provided with the cylinder valve. Other type of caps or plugs may result in leakage of propane.
• Do not sit or stand on this table.
• Keep children away during assembly. This item contains small parts which can be swallowed by children.
• Do not use indoors or inside any enclosure.
• Retain the assembly instructions for future reference.
• Installer — please leave these instructions with the owner.
10
LEAK CHECK
2. Apply several drops of solution where hose attaches to regulator.
3. Apply several drops of solution where regulator connects to cylinder.
5. Turn cylinder valve ON.
If bubbles appear at any connection there is a leak.
1. Turn cylinder valve OFF.
the hose should be returned to the place of purchase.
If NO bubbles appear at any connection, the connections are secure.
NOTE: Whenever gas connections are loosened or removed, you must perform a complete leak test. Complete installation.
Hose / Regulator
Connection
Regulator / Cylinder
Connection
WARNING!
OPERATING INSTRUCTIONS
Indice
