Step 2: Remove the (yellow)
Can Cover on the bottom of
the Stinger® Hornet by
rotating counter-clockwise
turn and removing.
Step 3: Fully screw in the threaded top of the
appropriate Stinger® Fluid Can (1FR™,
2C™,3PAO™) with your hand until hand tight. It
is normal to hear a pressure release sound
before the can is fully screwed in. Warnings: If it
is hard to screw in the can, remove the can and
try again. DO NOT FORCIBLY SCREW IN THE CAN.
If the can isn’t fully screwed in, the can could
leak. The Stinger® Hornet can only be used with
proprietary Stinger® fluids, DO NOT attempt to
insert other cans into the Stinger®Hornet.
Step 4: After inserting a can,
be sure to re-install the yellow
Can Cover. Slide over the can,
up to the Stinger® Hornet and
rotate clockwise until the
cover latches.
