Firstcom 07D200N Manuale utente
1
1. Getting Started………………………………………………………………………………4
1.1USB handset outlook………………………………………………………………………4
1.2Charging the Battery…………………………………………………………………….…5
1.3Switch the wireless handset On / Off…………………………………………………...6
1.4LCD outlook ………………………………………………………………………………..6
1.5Icon indications (PC side) ………………………………………………………………..7
1.6 LED light indication for the USB Dongle………………………………………………7
2 Driver Installation and Handset Set ups. ………………………………………………8
2.1 Driver Installation…………………………………………………………………………..8
2.1.1 Step-by-Step Driver installations …………………………………………………..…8
2.1.2. Synchronization between PC and handset………………..………………………10
2.1.3 Manual Synchronize name lists between PC and handset ………………….…11
3. Using the wireless USB handset………………………………………………………...12
3.1 Basic operating functions……………………………………………………………….12
3.1.1 Volume setup……………………………………………………………………………..12
3.1.2 Skype
TM
User Status setup…………………………………………………...………..13
3.1.3 Language Setup……………………………………………………………………….…14
3.1.4 Ring Tone Setup………………………………………………………………………….15
3.1.5 Ring Volume Setup………………………………………………………………………16
3.1.6 LCD Contrast Setup……………………………………………………………………..17
3.1.7 LCD backlight time Setup………………………………………………………………18
3.1.8 Factory Default Setup……………………………………………………………………19
3.1.9 Update list - Synchronize name list with PC…………………………………………20
3.1.10 Paring up - USB phone and Dongle………………………………………….………21
3.2 Using Skype
TM
to make calls…………………………………………………………..…22
3.2.1 Making calls from Name lists in handset…………………………………………..…22
3.2.1.1 Contact person status……………………………………………………………....…24
3.2.2 Making Conference calls from name lists in handset………………………..….…24
3.2.3 Making Skype
TM
Out from handset…………………………………………………….26
3.2.4 Making Speed dial from handset ………………………………………………...…….27
3.3 Using Handset to remote control Skype
TM
software………………………….....……28
3.4 Calling History……………………………………………………………………………….29
4Using Utility Control……………………………………………………….………………….30
4.1 Utility control panel………………………………………………………………………....30
4.1.1 Device Setup………………………………………………………………………….....…30
4.1.2 Favorite Website………………………………………………………………………...…31
2
5. Assigning PC Audio to PC Speakers………………………………………………………32
6. Package and accessories ……………………………………………..……………………33
7. Technical Specification…………………………………………………………………….…34
8. Technical problem / Q & A……………………………………………………………………35
3
Safety Instruction:
Please read this section carefully before start using wireless USB handset for Skype
TM
.
Battery Safety Instructions
•
Do not burn, disassemble, strike or mutilate the battery. The battery contains toxic materials
that could release, resulting in injury.
•
There is a risk of explosion if you replace the battery with an incorrect battery type. Use only
the battery that came with your phone.
•
Remove batteries if storing over 30 days.
•
Do not short circuit battery.
•
Do not dispose the battery in fire that could result in explosion.
•
Use specified chargers only.
•
Keep out of the reach of children.
The rechargeable battery must be disposed of properly and may need to be recycled. Refer to your
battery's label for battery type. Contact your local recycling center for proper disposal methods.
Disposal of the device
Some of the product material can be reuse if you bring them to a recycling point. Please contact
your local authorities in case you need more information on the collection points in your area.
Cleaning
Clean the headsets with a slightly damp cloth or with an anti-static cloth. Please do not use
abrasive solvent for cleaning purpose.
WARNING:
Skype
TM
software does not support calls to any emergency number nor emergency
service (e.g. 211, 911, 999 etc). To perform calls of this type please make sure to use a
landline telephone or a cellular/mobile phone.
4
1. Getting Started
This section provides the information about the wireless USB handset and step-by-step
instructions for using the wireless USB headset.
1.1 USB handset outlook:
1. LCD Display.
2. Skype
TM
/ Tab / Select Button.
3. Answer / Call / Hold / History Button.
4. Numeric / Mute Keys.
5. Menu / Exit Button
6. Up/Down / Name List /
Speaker Volume Control：
：：
：
7. Power On / Off / Call Ending /
Delete Button.
3
2
1
4
5
6
7
5
1.2 Charging the Battery:
Before you use the wireless Skype
TM
handset for the first time, you must make sure that the battery
is fully charged. For battery charging, do the following:
a) Open the battery compartment.
b) Insert the battery as indicated. (See below)
c) Your PC or notebook must be in "Power on" status.
d) Plug the USB cord charger into the Wireless Skype
TM
phone and connect to the USB jack of
your PC or notebook.
OPTIONAL:
Place the USB Wireless Phone on the charging
cradle. Connect the USB cord in the back of
the cradle to start charging.
While charging, the battery indicator bar will show the progress of charging in the LCD display.
Battery Insert picture.
Battery charging picture.
6
Icon Description
Battery power : 65% ~ 100%
Battery power : 35% ~ 65%
Battery power: less than 35%
LOW Battery. Need to charge.
1.3 Switch the wireless handset On / Off:
In order to achieve longer talking/standby hours, it is recommended switching off the handset when
the PC is shut down for power saving purpose. To switch the handset On/Off:
a) Press the call ending button on the handset
for 3~5 consecutive seconds.
b) A “Beep” tone and the LCD display on/off
indicate the on/off status.
1.4 LCD outlook:
Handset Standby Status:
7
1.5 Icon indications (PC side)
You will find an icon appear in the tool bar of your PC or notebook. Each icon indicates different
status of the wireless handset:
ICON Phone status indication
Failure to establish connection between handset and the Dongle. Please check if
the handset is power “ON” and the Dongle is properly installed in the USB jack.
2 or more Dongle are found. Please remove the excess Dongle.
Unable to find Dongle.
No driver is installed or, system can’t find driver.
Phone is in STAND BY Mode.
Recharging battery.
Low in battery. Please recharge the battery. (See section 1.2 for detail)
1.6 LED light indication for the USB Dongle
There is a LED light on the USB Dongle. The flashing of the LED light indicates:
Flashing style Status Indication
Rapidly Connection has just been established.
Flash in every 1.5 sec. Connection established and the handset is read to use.
Short flash in every 3 sec.
Searching for handset. (Unit paring up in progress)
No flash PC or Notebook is power off. No connection established.
8
2. Driver Installation and Handset Set ups.
This section provides the step-by-step instructions for driver installation and setups for the wireless
USB handset setups.
2.1 Driver Installation:
Before using the wireless USB handset, the driver must be installed first. Please follow the
installation procedures appear in the PC screen.
2.1.1 Step-by-Step Driver installations:
Step1: Please follow below indicated procedures to install the Driver for wireless USB handset.
Step 2: Select language:
Language is preset following the language set in the windows’ OS. If the windows’ preset
language is not recognizable, the language in this selection will be set in English.
9
Step 3: Select “NEXT” to proceed.
a) Welcome page. b) Select disk
c) Installation d) Completed
10
Step 4: Another Program wants to use Skype
TM
When Driver installed completed, this message will show if Skype
TM
program is activated.
Select “Allow this program to use Skype
TM
”.
2.1.2. Synchronization between PC and handset:
Once the driver is installed and the Skype
TM
program has been properly set (Section 2.1.1.), please
connect the dongle to your PC / Laptop for phone set up.
PC side will show this icon if dongle is not
plug-in.
PC side will show this icon if dongle is plug-in.
Remark:
a) Please make sure the wireless handset is in “Power ON” status. (see 1.3 for detail)
Indice
