Fisair CCB2.0 Manuale utente

FISAIR, S.L.U. C/Uranio, 20; PoI. Ind. Aimayr, 28330 San Martín de la Vega (Madrid) Spain.

Tel: (+34) 91 692 15 14 Fax: (+34) 91 691 64 56 | info@fisair.com| fisair.com

INSTALLATION AND OPERATION MANUAL

FOR THE BASIC CONTROL PANEL (CCB2.0) FOR

FISAIR EVAPORATIVE HUMIDIFIERS

Software version 2.1 | MCCB2.0-EN-21-3

In compliance with the Rules and Standards of the European Union on Machine Safety, it is essential to read this protocol

carefully before installing any equipment.

MANUAL for the basic control panel | CCB2.0

MANUAL for the basic control panel | CCB2.0 
 
 

Contents 
Safety instructions................................................................................................................... 5 
General description................................................................................................................. 6 
Operating environment............................................................................................................ 7 
Rating plate and machine classification:.................................................................................. 9 
Hardware description .............................................................................................................11 
Connections...........................................................................................................................20 
Supervision ............................................................................................................................25 
Configuration..........................................................................................................................27 
1. Emptying.............................................................................................................................27 
1.1. Emptying by conductivity control: ....................................................................................27 
1.2. Standard emptying:.........................................................................................................28 
1.3. No emptying (never):.......................................................................................................28 
2. Configuration Prior to Start-Up (Pre-Start-up).....................................................................28 
3. Stages Conf........................................................................................................................29 
4. 0...10V o 4...20 mA Conf.:...................................................................................................29 
5. UV lamp configuration.........................................................................................................29 
6. Bus configuration................................................................................................................30 
6.1. MODBUS: TCP/IP y RTU................................................................................................30 
6.2. BACnet/IP:......................................................................................................................34 
7. Language............................................................................................................................38 
8. Date....................................................................................................................................38 
Settings..................................................................................................................................39 
1. SET-POINT µS/cm (if applicable) .......................................................................................39 
2. TIMER T01 (ex SW1 AB)....................................................................................................39 
3. TIMER T02 (ex SW1 CD) ...................................................................................................40 
4. TIMER T03 (ex SW2 AB)....................................................................................................40 
5. TIMER T04 (ex SW2 CD) ...................................................................................................40 
6. TIMER T05 (ex SW3 AB)....................................................................................................40 
7. TIMER T06 (ex SW3 CD) ...................................................................................................41 
8. TIMER T07 (ex SW4 CD) ...................................................................................................41 
9. TIMER T08.........................................................................................................................41 
Calibration ..........................................................................................................................42 
Launching...........................................................................................................................43 
Alarms................................................................................................................................46 
 

MANUAL for the basic control panel | CCB2.0

13. Declaration of conformity....................................................................................................47

13.1. D.C. Machine...............................................................................................................47

13.2. D.C. Partly completed machinery.................................................................................48

14. Warranty.............................................................................................................................49

ANEX

E09489-D (230VAC) WIRING DIAGRAM

E09490-D (400VAC) WIRING DIAGRAM

MANUAL for the basic control panel | CCB2.0

1. Safety instructions

Need to consign the control panel for maintenance and revision

The machine controlled by CCB2.0 panel must not be manipulated when it is in operation.

Facing any problem that is detected in the machine during its operation, disconnect it

and set the main switch of the CCB2.0 panel using a padlock.

Installation of a residual current device in the power supply line.

The installer must install a specific residual current device in the machine's electrical

power circuit.

FISAIR disclaims any liability if not all the installation and operating instructions it has

provided are complied with; if the products have been modified or altered without the written

consent of FISAIR; or if the products have been subjected to improper use, mishandling,

alteration, improper maintenance or show signs of negligent use or being involved in an

accident. These situations could include an incorrect power connection, impacts with other

objects, removal or disarming of security fittings/measures, etc.

MANUAL for the basic control panel | CCB2.0

Max.25m

2. General description

The basic control panel has been specifically designed for the interconnection and supervision of

the accessories supplied with the FISAIR Evaporative Humidifiers. The incorporation of the CCB2.0

provides a more accurate, simple and reliable integration for this in air handling units.

The control panel manages all the field components of FISAIR Evaporative Humidifiers:

•Water recirculation pump

•Detector of the minimum and maximum basin water level

•Basin water supply solenoid valve

•Emptying/draining motor-valve in the basin

•UV lamp water treatment system (optional)

•Water conductivity control (optional)

•Modbus TCP/IP (optional)

•Modbus RTU (optional)

•BACnet/IP (optional)

* For the MAXIMUM distance of the conductivity probe, ask FISAIR when

CCB2.0 + Conductivity Control

Figure 1: Examples of installation of CCB2.0 on vertical wall and CCB2.0 integrated in the AHU

MANUAL for the basic control panel | CCB2.0

3. Operating environment

The Basic Control panel is supplied in an insulating box composed of a bottom and a hinged lid

made of steel with a surface finish of RAL7035 grey weather-resistant epoxy-polyester powder with

IP54 degree of protection according to IEC-60529 and IK10 impact protection according to

IEC62262.

Operating environment temperature and humidity conditions:

•Relative humidity [5%... 95% HR], no condensation.

•Temperature [-10 °C ... +40°C]

The recommended gaps for connection, inspection and maintenance must be observed during

installation. If the box is drilled in the locations indicated for mounting, it must be ensured that a

degree of protection ≥ IP54 is maintained.

The basic control panel weighs 6 kg and must be installed vertically on the wall (see Figure 1) to

maintain the degree of protection IP54. Figures 2.1 and 2.2 show the minimum service spaces to be

observed and the drill hole measurements for mounting.

Figure 2.1: Vertical section: front, open door. Figure 2.2: Cross section: door closed/open

(Interior)

MANUAL for the basic control panel | CCB2.0

INSTALLATION OF THE CONTROL PANEL OUTSIDE:

Whenever the control panel is installed outdoors, it

must be placed under an appropriate cover to protect

it from the direct incidence of rain and sun (considering

that 40ºC cannot be exceeded in the installation

area):

MANUAL for the basic control panel | CCB2.0

4. Rating plate and machine classification:

The rating plate provides essential information about the technical features of the machine.

The EC MachinerySafety Regulation requires allmachinery operated within the European Economic

Community to have a rating plate indicating its main features, the machine serial number and the

manufacturer's name inscribed in a durable manner.

According to article 2, section g of the Machinery Directive 2006/42/CE - RD 1644/2008, ‘partly

completed machinery’ means

“an assembly which is almost machinery, but which cannot in itself perform a specific application.

A drive system is partly completed machinery. Partly completed machinery is intended only to be

incorporated into or assembled with other machinery or other partly completed machinery or

equipment, thereby forming machinery to which this Directive applies”

Therefore, the CCB2.0 basic control panel is classified as a “partly completed machinery”

Note: If the CCB2.0 basic control panel is supplied together with a device from the HEF range,

the set is classified as "machine"

Location of the rating plate:

MANUAL for the basic control panel | CCB2.0

The rating plate shows the following information for the particular CCB2.0 stages control panel:

•Model

• Serial No.: equipment serial number

• Power supply

• Maximum power

• Rated current

• Wiring diagram

• Configuration program

• Machine type

• Designed according to the directive:

• FISAIR equipment you can join

• Year and place of manufacture.

•Service QR code and Warranty activation

Indice

Altri manuali fisair Pannello di controllo

fisair

fisair CCE2.0 Manuale utente

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche

fisair CCB2.0 Manuale utente

Manuali Pannello di controllo popolari di altre marche