Fisher-Price 79415 Manuale utente

My Little Desk Bed

Model Number: 79415

Please read these instructions and keep them for future reference.

Adult assembly is required.

My Little Desk Bed is recommended for children who are at

least 15 months old and are ready to progress from a crib to a bed,

including being able to get on and off a bed unassisted.

Maximum weight: 50 lbs.

Tools needed for assembly: Hammer and Two Phillips Screwdrivers.

Instructions

WARNING

• Use only a full size crib mattress at least 271/4" (690 mm) by 515/8" (1310 mm) by 5" (127 mm) thick.

• Never place bed near windows where cords from blinds or drapes may strangle child.

• Regularly inspect bed for damage. DO NOT use bed if any parts are missing or broken.

Call Fisher-Price (1-800-432-KIDS in U.S.) for replacement parts and instructions if needed.

DO NOT substitute parts.

• Make sure the space between the bed and the wall or other furniture is less than 23/8" or more

than

8".

Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us, toll-free,

rather than return this product to the store. Usually we can solve the problem on the telephone or by sending you replacement

parts. Please call Fisher-Price Consumer Affairs, toll-free at 1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday.

Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price Consumer Affairs,

636 Girard Avenue, East Aurora, New York 14052.

Message to Parents

Toddler Bed Assembly

Fisher-Price

Curved Side Rail – 2

Straight Side Rail – 2

Crimped

Mattress Tube – 4

Mattress Tube – 2

Left Side Panel

Right Side Panel

Headboard

Footboard

#10 – 24 x 11/4" Screw – 2

#10 – 24 x 1/2" Barrel Nut – 10

(ALL SHOWN ACTUAL SIZE)

Failure to follow these warnings and the assembly instructions could result

in a serious injury or death from entrapment or strangulation.

• Please save all packaging material until assembly is complete to ensure no parts are discarded.

• Before assembling My Little Desk BedTM, please wipe each part with a clean, dry cloth.

#10 – 24 x 11/2" Screw – 8

Mattress Retainer – 2

• Check to be sure the crimped mattress tubes are inserted

properly.

• There is a metal tab on one side of the crimped end. Make

sure the metal tab is not showing.

•Pull up firmly on the crimped mattress tubes to be

sure they are securely in place.

• If the crimped mattress tubes can be removed from the

straight side rail, re-read and repeat step .

• Insert the mattress tube into the hole in the straight side rail.

Straight Side Rail

Crimped Mattress Tubes

Straight Side Rail

Crimped Mattress Tube

Helpful Hint: The assembly of the crimped mattress

tubes to the straight side rail is permanent. Once assembled

properly, you will be unable to remove the crimped mattress

tubes.

• Place one of the straight side rails on a soft, flat surface.

• Insert a crimped mattress tube into each slot in the straight

side rail.

• Tap the ends of the crimped mattress tubes with a hammer

until they snap into place.

Metal Tab

Showing

INCORRECT CORRECT

Mattress Tube

Straight Side Rail

CAUTION

Please keep small parts and

plastic bags out of children’s reach.

Dispose of plastic bags properly.

Toddler Bed Assembly

• Check to be sure the crimped mattress tubes are inserted

properly.

• There is a metal tab on one side of the crimped end. Make

sure the metal tab is not showing.

•Pull up firmly on the straight side rail to be sure the

mattress tubes are securely in place.

• If the straight side rail can be removed from the crimped

mattress tubes, re-read and repeat step .

• Repeat steps - to assemble the curved side rails and

remaining crimped and regular mattress tubes.

• Make sure the curved ends of the curved side rails are on

the same side.

• Place both metal frame assemblies on a flat surface.

• Insert the straight side rails into the curved side rails, as

shown.

• Position the other straight side rail so that the screw holes

on each straight side rail are on the same side.

Helpful Hint: The assembly of the crimped mattress tubes

to the straight side rail is permanent. Once assembled prop-

erly, you will be unable to remove the straight side rail.

• Fit the slots and hole in the straight side rail onto the

mattress tubes.

• Push down on both ends of the straight side rail to be sure

the crimped mattress tubes snap into place.

Straight Side Rail

Crimped Mattress Tubes

Screw Holes

INCORRECT CORRECT

Metal Tab

Showing

Crimped Mattress Tube

Mattress Tube

Curved Side Rail

Crimped Mattress Tubes

Mattress Tube

Curved Ends

Curved Side Rail

Straight Side Rail

Toddler Bed Assembly

• Stand the headboard assembly upright, as shown.

• Push down on the top of the headboard to secure it to the

right and left side panels.

Helpful Hint: If you are having difficulty securing the

headboard to the left and right side panels, position the

assembly against a wall (with the molded moon, sun

and star toward the wall). Push down on the top of the

headboard to secure it to the left and right side panels.

• Turn the headboard assembly backward, as shown.

• Position the metal frame with the straight ends downward,

and the curved ends pointing forward, as shown.

• Insert the metal frame straight ends into the grooves in the

left and right side panels.

• Position the headboard on a flat surface with the molded

moon, sun and star facing up.

• Position the right side panel with the Rfacing the

headboard.

• Fit the pegs on the headboard into the slots in the right

side panel.

• Repeat this procedure to attach the left side panel to the

headboard.

Fisher-Price

• Locate the holes in the metal frame, near the middle.

• Position a mattress retainer so that the arrow is pointing

up and is over the hole on the inside of the metal frame

assembly.

• Insert a barrel nut through the mattress retainer and into the

inside of the metal frame.

• Insert a 11/4" screw into the outside of the metal frame and

hand tighten the hardware.

• While holding the barrel nut in place with a Phillips screw-

driver, tighten the screw with the other Phillips screwdriver.

Do not over-tighten.

• Repeat this procedure to attach the other mattress retainer

to the other side of the metal frame.

Mattress Retainer

Headboard

Right Side Panel

Left Side Panel

Headboard

Left Side Panel

Right Side Panel

Metal

Frame

Headboard

Straight End

Groove

Right Side Panel Left Side Panel

#10 – 24 x 11/4" Screw

Shown Actual Size

Pegs

Slots

Metal Frame

Fisher-Price

• Fit the metal frame curved ends into the grooves in the

footboard.

Fisher-Price

• Insert four barrel nuts into the metal frame curved ends.

• Insert four screws into the outside of the footboard and

hand tighten the hardware.

• While holding a barrel nut in place with a Phillips screw-

driver, tighten the screw with the other Phillips screw-

driver. Do not over-tighten. Repeat this procedure to tighten

the other screws.

Toddler bed assembly is now complete.

Footboard

Metal Frame Curved End

Groove

Footboard

Toddler Bed Assembly

• Push down on the metal frame to completely insert it into

the grooves in the left and right side panels.

• Insert two barrel nuts into the metal frame located on the

inside of the left side panel, as shown.

• Insert two screws into the outside of the left side panel and

hand tighten the hardware.

• While holding a barrel nut in place with a Phillips screwdriv-

er, tighten the screw with the other Phillips screw-

driver. Do not over-tighten. Repeat this procedure to tighten

the other screw.

• Repeat this step to secure the right side panel to the

metal frame.

• Turn the assembly right side up.

Metal Frame

Left Side Panel

Screws

Barrel Nuts

Screws

Converting the Toddler

Bed to a Desk

Fisher-Price

• The My Little Desk BedTM easily disassembles to convert to a

desk.

• Remove the barrel nuts and screws (eight of each) from the

left side panel, right side panel and footboard.

• Remove the headboard, left and right side panels and foot-

board from the metal frame.

IMPORTANT! Do not attempt to disassemble the metal

frame. Please store the metal frame with barrel nuts

and screws in a safe place for future use.

Desk Assembly

Desk Top

(was

Footboard)

Left Side Panel

Right Side Panel

• Position the desk on a flat surface with the molded moon,

sun and star facing down.

• Position the right side panel with the Rfacing the desk.

• Fit the pegs on the desk into the slots in the right side

panel.

• Repeat this procedure to attach the left side panel to the

desk.

Desk

Right Side Panel Left Side Panel

Pegs

Slots

• Stand the desk assembly upright, as shown.

• Push down on the top of the desk to secure it to the left

and right side panels.

Helpful Hint: If you are having difficulty securing the desk

to the left and right side panels, position the assembly

against a wall (with the molded Fisher-Price logo toward

the wall). Push down on the top of the desk to secure it to

the left and right side panels.

Desk

Left Side Panel

Right Side Panel

Desk (was

Headboard

Helpful Hint: Because you are assembling a desk, we have

converted the names of some of the parts in this section.

• The headboard is now the desk.

• The footboard is now the desk top.

Desk Assembly

• Position the desk top so that the grooved side is toward the

desk.

• Fit the pegs on the desk into the grooves in the desk top.

• Rotate the desk top down.

Helpful Hint: When converting the desk back to a toddler

bed, rotate the desk top upright and lift to remove it from

the desk.

Desk assembly is now complete.

• Wash all parts with a mild cleaning agent and damp cloth.

Do not use bleach. Rinse with clean water to remove

residue.

• Periodically check My Little Desk BedTM for loose fasteners

and tighten as needed.

Desk Top

Desk

Peg Peg

Groove Groove

Desk Top

Fisher-Price, Inc., 636 Girard Avenue, East Aurora, New York

14052, warrants that My Little Desk BedTM is free from all

defects in material and workmanship when used under

normal conditions for a period of one (1) year from the date

of purchase.

Should the product fail to perform properly, we will repair

or replace it at our option, free of charge. Purchaser is respon-

sible for shipping the product to Fisher-Price Consumer

Affairs at the address indicated above and for all associated

freight and insurance cost. Fisher-Price, Inc. will bear the

cost of shipping the repaired or replaced item to you.This

warranty is void if the owner repairs or modifies the product.

This warranty excludes any other liability other than that

expressly stated above including but not limited to any

incidental or consequential damages.

SOME STATES DO NOT ALLOW THE EXCLUSION OR

LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION

MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS

AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS

WHICH VARY FROM STATE TO STATE.

If you have any questions about this product:

In Canada, call 1-800-567-7724, or write to: Mattel/Fisher-Price,

6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.

In Great Britain, telephone 01734 770488.

In Australia, call the Fisher-Price Australian Consumer Advisory Service

toll-free at 1-800-800-812, or write to: Fisher-Price, Mattel Pty. Limited,

461 Plummer Street, Port Melbourne,Victoria 3207.

One (1) Year

Limited Warranty

CareDesk Assembly

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fisher-Price Mobili per neonati e bambini piccoli

Fisher-Price

Fisher-Price DMN34 Manuale utente

Fisher-Price

Fisher-Price 3032 Manuale utente

Fisher-Price

Fisher-Price DTG99 Manuale utente

Fisher-Price

Fisher-Price W0409 Manuale utente

Fisher-Price

Fisher-Price H8906 Manuale utente

Fisher-Price

Fisher-Price J7815 Manuale utente

Fisher-Price

Fisher-Price BHL59 Manuale utente

Fisher-Price

Fisher-Price FXV25 Manuale utente

Fisher-Price

Fisher-Price FFJ02 Manuale utente

Fisher-Price

Fisher-Price L3891 Manuale utente

Fisher-Price

Fisher-Price RAINFOREST K4562 Manuale utente

Fisher-Price

Fisher-Price X7306 Manuale utente

Fisher-Price

Fisher-Price CBT81 Manuale utente

Fisher-Price

Fisher-Price DTL54 Manuale utente

Fisher-Price

Fisher-Price HGX40 Manuale utente

Fisher-Price

Fisher-Price B0771 Manuale utente

Fisher-Price

Fisher-Price FBL70 Manuale utente

Fisher-Price

Fisher-Price BMB79 Manuale utente

Fisher-Price

Fisher-Price L0542 Manuale utente

Fisher-Price

Fisher-Price CLR36 Manuale utente

Fisher-Price

Fisher-Price GPN10 Manuale utente

Fisher-Price

Fisher-Price P5344 Manuale utente

Fisher-Price

Fisher-Price HLV76 Manuale utente

Fisher-Price

Fisher-Price GCG61 Manuale utente

Manuali Mobili per neonati e bambini piccoli popolari di altre marche

Mocka

Mocka Learning Tower Manuale utente

VERTBAUDET

VERTBAUDET 62003-2789 Manuale utente

Summer

Summer MY FUN POTTY Manuale utente

Grotime

Grotime Changeover Manuale utente

Fillikid

Fillikid 1221 Manuale utente

Relita

Relita loft bed ALEX Manuale utente

Joovy

Joovy Qool Manuale utente

KidKraft

KidKraft Step n Store Manuale utente

Germania

Germania Moon 4048.101 Manuale utente

BabyGo

BabyGo Amila Manuale utente

Triclimb

Triclimb AT1 Manuale utente

Graco

Graco Dream Suite Manuale utente

Delta Childrens Products

Delta Childrens Products BB87116CR Manuale utente

Costway

Costway BB5591 Manuale utente

SAUTHON

SAUTHON UP CHENE DORE UI101A Manuale utente

Delta Children

Delta Children Classic Manuale utente

Chicco

Chicco Next 2 Me Magic Manuale utente

Flexa

Flexa 82-10020-1/-40 Manuale utente