Fisher-Price BOUNCE N GO G4815 Manuale utente

G4815

Instructions

Bounce ‘n Go™Coupe

Please read these instructions carefully and identify all parts before assembly.

Refer to the parts and fasteners pages for identification.

Keep this instruction sheet for future reference, as it contains important information.

Adult assembly is required.

Ages 18 months – 5 years.

Maximum weight: 50 lbs. (23 kg).

Tools needed for assembly: Hammer, Phillips Screwdriver and Scrap Block of Wood (not included).

This product requires three “AAA” (LR03) alkaline batteries (not included) for sound box operation.

If you have any questions about this product, or are missing a part, please contact Fisher-Price®

(online at www.service.mattel.com or call toll-free at 1-800-432-5437) rather than return this product to the store.

www.fisher-price.com

Stationary

Bouncy-Car Action

2Push’n Pedal Car 3Pedal Car

Parts

Handle/Canopy Notes:

•Some parts shown are assembled to

both sides of the coupe.

• Please save all packaging material until

assembly is complete to ensure that no

parts are discarded.

• Please wipe each part with a clean, dry

cloth before assembling this product.

• Part not shown: label sheet.

Upper Post

Sound Box Cover

Sound Box

.354" Cap Nut

Steering Wheel

Turn Signal

Steering Wheel Base

2 Axle Covers

2 .354" Cap Nuts

Frame

Latch Halves

Grip Halves

Seat

Lower Post

Rear Axle

Footrest

Steering

Column

Steering Linkage Assembly - Fitted to Frame

(with Front Axles)

2 5/16" Washers

2 Frame Bushings

2 Small Front Wheels

4 Wheel

Bushings

4 – .354"

Cap Nuts

Assembly Tool

Bouncing Base/Spoiler 4 Axle Bushings

4 Axle

Covers

2 Large Rear Wheels

Warning and Caution

CAUTION

WARNING

To avoid serious injury:

• Adult supervision required.

• Never use near cars and other motor vehi-

cles, near streets, steps, sloped driveways,

hills, roadways, alleys, swimming pools, or

other bodies of water.

• Always wear shoes or sneakers

• Never allow more than one (1) rider.

#10 x 21/8" Bolt – 1

ALL SHOWN ACTUAL SIZE

5/16" Washer - 2

.354" Cap Nut - 7

#6 x 1/2" Screw – 6

1/4" x 11/4" Screw – 1

#8 x 3/4" Screw – 11

.354"

Note: Tighten and loosen all screws and the bolt with a

Phillips screwdriver. Do not over-tighten the screws and bolt.

This product contains small parts in its

unassembled state.

Adult assembly is required.

Fasteners

Note: We’ve included extra fasteners for your convenience!

• Place the frame upside down on a flat surface. Make sure the steering

linkage assembly is fitted to the front end of the frame.

• Remove the tape holding the front axles to the frame. Rotate the front

axles out.

• Push the front axles down into the groove in each end of the

steering linkage.

• Fit the peg on the footrest into the hole inside the frame.

• Insert the 1/4" x 11/4" screw into the footrest and tighten.

PUSH

Assembly

Steering Linkage

Assembly

Frame

Front Axles

Groove

PUSH

Footrest Peg

• While holding the steering linkage assembly in place, carefully turn

the frame upright.

• Fit a .354" cap nut onto the upright end of a front axle.

• While holding the front axle in place, tap the cap nut with a hammer

to secure it to the front axle. Pull up on the cap nut to be sure it

is secure.

Hint: You may need the help of another adult to hold the front axle

in place while you tap the cap nut with a hammer.

• Repeat this procedure to assemble another cap nut to the other

front axle.

.354"

Cap Nuts

Front Axles

.354"

Bottom View

Front Side View

• Fit an axle cover over the cap nuts and to the front end of the frame.

Push down on the axle covers to “snap” them into place.

Hint: You may need to carefully tap the axle covers with a hammer

to secure in place.

Axle Covers

• Slide a 5/16" washer onto a front axle.

• Next, fit an axle bushing, barrel side first, onto a front axle.

• Locate both small, front wheels.

• Slide a small, front wheel, flat side first, onto the front axle.

Assembly

5/16" Washer

Axle

Bushing

Front Axle

Small

Front Wheel

• Fit a wheel bushing, peg side first, into the small, front wheel and onto

the front axle.

Wheel

Bushing

• Fit a .354" cap nut onto the end of the front axle.

• Cover the cap nut with the assembly tool. Tap the cap nut assembly

tool with a hammer to secure the cap nut to the front axle.

• Pull on the small, front wheel to be sure it is secure on the front axle.

• Lift the back end of the

frame up slightly.

• Position the bouncer

base/spoiler so that the

columns are upright and

the “U” shaped cut-out is toward the back of the vehicle.

• Now, lower the back end of the frame onto the bouncer base/spoiler

tabs. Make sure the tabs on the bouncer base/spoiler fit into the

grooves in the frame.

Assembly

.354"

Cap Nut

Assembly Tool

Axle Cover

• Fit an axle cover to the small, front wheel, as shown.

• Push the axle cover to “snap” it into place.

Hint: You may need to carefully tap the axle covers with a hammer

to secure in place.

• Repeat assembly steps 6-10 to assemble a 5/16" washer, axle

bushing, small, front wheel, wheel bushing, .354" cap nut and axle

cover to the other front axle.

Back End of Frame

Groove

Tabs Bouncer Base/Spoiler

• Fit the frame bushings into the slots in the back end of the frame.

Hint: The frame bushings are designed to fit in the slots one way!

If the frame bushing does not fit in the slot, turn it around and try again.

Frame Bushing

“U” Shaped Cut-Out

Back View

Frame Bushing

Rear Side View

• Slide the smooth end of the rear axle into the hole in one side of the

bouncer base/spoiler, a frame bushing, the frame, the other frame

bushing and out through the hole in the other side of the bouncer

base/spoiler.

Hint: You may need to turn the pedals to align the gears in the back

end of the frame and allow the rear axle to easily pass through all parts.

• Slide an axle bushing, barrel side first, onto the end of the rear axle.

• Slide a large rear wheel, flat side first, onto the rear axle.

• Fit a wheel bushing, peg side first, into the large, rear wheel and onto

the rear axle.

Assembly

Rear Axle

Axle

Bushing

Wheel

Bushing

Rear Axle

Large

Rear Wheel

• Fit a .354" cap nut onto the end of the rear axle.

• Cover the cap nut with the assembly tool.

• While supporting the other end of the rear axle, tap the assembly tool

with a hammer to secure the cap nut to the rear axle.

Hint: You may need the help of another adult to hold the rear axle

in place while you tap the cap nut with a hammer onto the rear axle.

• Pull on the large, rear wheel to be sure it is secure on the rear axle.

.354"

Cap Nut

Assembly Tool

Insert Rear Axle

through these Parts

.354"

Front Side View

• Fit an axle cover to the large, rear wheel, as shown.

• Push the axle cover to “snap” it into place.

Hint: You may need to carefully tap the axle cover with a hammer to

secure in place.

• Repeat assembly steps 13-17 to assemble an axle bushing, large,

rear wheel, wheel bushing, .354" cap nut and axle cover to the other

end of the rear axle.

Assembly

• Fit the seat onto the frame.

Hint: Please refer to the Seat Adjustment instructions on page 13 to

place the seat in either of two positions (front or back), depending on

the size of your child.

• Insert three #8 x 3/4" screws into the seat and tighten.

• Fit the steering wheel base to the front end of the frame.

• Insert two #8 x 3/4" screws into the steering wheel base and tighten.

Frame

Seat

Frame

Steering Wheel Base

Axle Cover

• Position the turn signal so that the rounded side is upright.

• Fit the turn signal onto the steering wheel base.

Turn Signal

Steering Wheel

Base

Back View

Assembly

• Lift the front end of the vehicle.

• Insert the straight end of the steering column up through the hole in

the frame. 23

• Fit the steering wheel onto the turn signal and the steering column.

• Fit a .354" cap nut onto the end of the steering column.

• Cover the cap nut with the assembly tool.

• While supporting the other end of the steering column, tap the

assembly tool with a hammer to secure the cap nut to the

steering column.

Hint: You may need the help of another adult to complete this

assembly step.

• Pull the steering wheel to be sure it is secure.

Steering Column

Steering Wheel

Cap Nut

Frame Hole

Steering Column

Turn Signal

.354"

Assembly Tool

• Fit the curved end of the steering column into the hole in the

steering linkage.

Hint: You may need to turn the front wheels slightly to align the holes

and insert the steering column.

• Lower the front end of the vehicle.

Steering Column Curved End Steering LInkage Hole

Bottom View

Back View

.354" Cap Nut

• Fit the sound box inside the center of the steering wheel.

Assembly

• Fit the top edge of the sound box cover into the groove in the

steering wheel.

•“Snap” the sound box cover into the center of the steering wheel.

Sound Box

Sound Box Cover

• Loosen the screws in the sound box battery compartment door.

Remove the battery compartment door.

• Insert three, new, alkaline “AAA” (LR03) batteries into the

battery compartment.

Hint: We recommend the use of alkaline batteries for longer battery life.

• Replace the battery compartment door and tighten the screws.

Battery Safety Information

Batteries may leak fluids that can cause a chemical burn injury or ruin your

toy. To avoid battery leakage:

• Do not mix old and new batteries or batteries of different types:

alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

• Insert batteries as indicated inside the battery compartment.

• Remove batteries during long periods of non-use. Always remove

exhausted batteries from the toy. Dispose of batteries safely. Do not

dispose of batteries in a fire. The batteries may explode or leak.

• Never short-circuit the battery terminals.

• Use only batteries of the same or equivalent type, as recommended.

• Do not charge non-rechargeable batteries.

• Remove rechargeable batteries from the toy before charging.

• If removable, rechargeable batteries are used, they are only to be

charged under adult supervision.

1.5V x 3

"AAA" (LR03)

SHOWN ACTUAL SIZE

Back View

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fisher-Price Giocattolo

Fisher-Price

Fisher-Price V4436 Manuale utente

Fisher-Price

Fisher-Price V4554 Manuale utente

Fisher-Price

Fisher-Price DMY02 Manuale utente

Fisher-Price

Fisher-Price 77473 Manuale utente

Fisher-Price

Fisher-Price CDH24 Manuale utente

Fisher-Price

Fisher-Price TrackMaster CDB60 Manuale utente

Fisher-Price

Fisher-Price Thomas & friends Track Master Avalanche Escape... Manuale utente

Fisher-Price

Fisher-Price K3799 Manuale utente

Fisher-Price

Fisher-Price T3816 Manuale utente

Fisher-Price

Fisher-Price DRD92 Manuale utente

Fisher-Price

Fisher-Price Y0997 Manuale del proprietario

Fisher-Price

Fisher-Price 72818 Manuale utente

Fisher-Price

Fisher-Price CHM31 Manuale utente

Fisher-Price

Fisher-Price W9981 Manuale utente

Fisher-Price

Fisher-Price H8227 Manuale utente

Fisher-Price

Fisher-Price R6150 Manuale utente

Fisher-Price

Fisher-Price POWER WHEELS Barbie FRC29 Manuale utente

Fisher-Price

Fisher-Price Smithsonian 77897 Manuale utente

Fisher-Price

Fisher-Price BFH64 Manuale utente

Fisher-Price

Fisher-Price Learning Birdbath G2807 Manuale utente

Fisher-Price

Fisher-Price Ramps Around Garage B1832 Manuale utente

Fisher-Price

Fisher-Price BOUNCE & SPIN ZEBRA K0317 Manuale utente

Fisher-Price

Fisher-Price Little People Disney Princess CGT78 Manuale utente

Fisher-Price

Fisher-Price R7153 Manuale utente

Manuali Giocattolo popolari di altre marche

marklin

marklin 37321 Manuale utente

Canon

Canon PAPER CRAFT Manuale utente

GREAT PLANES

GREAT PLANES Pitts M-12S Manuale utente

NOCH

NOCH 14261 Manuale utente

Hausler

Hausler 450 SE V2 Manuale utente

Dynaflite

Dynaflite Daydream Manuale utente

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuale

Kenner

Kenner Batman 63651 Manuale utente

LEGO

LEGO 8527 Manuale utente

iKarus

iKarus ECO 8 Manuale utente

Multiplex

Multiplex EasyStar II Manuale di istruzioni

Walkera

Walkera 38 Manuale di istruzioni

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuale utente

MD MXION SWD Manuale utente

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuale utente

marklin

marklin 39671 Manuale utente

Meccano

Meccano 15103 Manuale utente

LEGO

LEGO TECHNIC 8735 Manuale utente