Fission DK-5901 Manuale utente
DUAL High Denition DVB-T Receiver
User Manual
Model Number: DK-5901
After Sales Support TEL: 1300 558 702 WEB: www.unisupport.net
Contents
What Your 1 Year Warranty Means 03
General Information and Safety Instructions 04
Assembly and Parts List 05
Instructions 06
Hardware Driver Installation 06
Software Installation 08
Arcsoft Total Media™ User Manual 11
Hardware Installation 12
Arcsoft Total Media™ Introduction 13
Remote Control 20
After Sales Support TEL: 1300 558 702 WEB: www.unisupport.net 2
What Your 1 Year Warranty Means
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In
the event of product failure within its intended use over the course of the
rst 1 year after the date of purchase, we will rectify the problem as quickly
as possible once it has been brought to our attention. In the unlikely event
of such an occurrence, or if you require any information about the product
please contact us via our after sales support services, details of which can
be found in this manual and on the product itself.
After Sales Support TEL: 1300 558 702 WEB: www.unisupport.net 3
General Information and Safety Instructions
Quick Installation Guide / Special Notes
1. This device requires Microsoft Windows™ XP (SP2) or Vista, as well as
Microsoft DirectX™ 9.0 or above. Before driver and software installation,
download DirectX™ 9.0 from Microsoft website www.microsoft.com (if
not already installed).
2. Before using the DUAL DVB-T Receiver install driver and software from
CD
3. The power consumption of a USB port is limited; therefore, please
disconnect all other USB devices when using your USB Digital TV
device (DTV). If the “USB Device Not Recognized” error message pops
up while connecting the USB DTV device, please disconnect all USB
devices and try to reconnect.
4. Please note that each USB port has a unique ID; therefore, when the
USB DTV device is connected to a USB port, which has never been
connected with this device before, the system will promptly re-install
the driver. Please follow the procedures of Driver Installation to install
the drivers properly (after installation as below). This is particularly
obvious when using a USB Hub.
After Sales Support TEL: 1300 558 702 WEB: www.unisupport.net 4
Assembly and Parts List
1x Fission™ DUAL High Denition DVB-T Receiver
2x Portable Outdoor Antennas
2x Antenna Adapters
1x Remote Control
1x Arcsoft Total Media™ Software CD with Manual
4After Sales Support TEL: 1300 558 702 WEB: www.unisupport.net 5
Instructions
Hardware Driver Installation
1. Insert the software CD into the CD-ROM drive.
2. The CD ROM will automatically enable the Autorun program.
3. Please click “Driver Installation”to install the driver for the USB DUAL
DVB-T receiver. (If the installation does not automatically start, please
go to the directory of “E:\Driver\Driver” and execute “setup.exe” to
install the driver - if E:\ is your CD Rom drive).
After Sales Support TEL: 1300 558 702 WEB: www.unisupport.net 6
4. Click "Next"
5. Click “Finish”to complete the driver install.
6After Sales Support TEL: 1300 558 702 WEB: www.unisupport.net 7
Software Installation
1. Click the “Arcsoft Total Media” option on the Autorun page to install
Total Media software. (If the installation does not automatically start,
please go to the directory of “E:\TotalMedia 3”and execute “setup.exe”
to install the software - if E:\ is your CD Rom drive).
2. Please choose your preferred language.
3. Click “Next”
After Sales Support TEL: 1300 558 702 WEB: www.unisupport.net 8
4. Click “Yes”
5. Put in Name, Company Name and Licence Key (from White CD-cover)
and Click “Next”
8After Sales Support TEL: 1300 558 702 WEB: www.unisupport.net 9
6. Click “Next
7. Click “Next
After Sales Support TEL: 1300 558 702 WEB: www.unisupport.net 10
Indice
Altri manuali Fission Ricevitore TV
