Connection Methods
Connection Method 1:
ES30 / ES50 / ES75
Connection Method 4:
Tube Clamps
Connection Method 2:
Snap Buttons & Swage
Connection Method 3:
ES30-90B / ES30-I / ES30-C
Compress the unlocked connector and slide one tube onto each end.
Lock both screws carefully using your hex key tool. Be sure to lock
securely, but do not overtighten.
Be sure to fully assemble all frames before using clamps. With the clamp unlocked, place one tube of the
first frame into the mouth of the clamp. Place the second tube (if applicable) into the second mouth of the
clamp. With both frame’s tubes in the clamp, be sure to lock securely, but do not overtighten.
Locate the snap button on the connector or swage tube. Locate the
hole on the corresponding tube. Press the snap button with your thumb
and slide the tube and connector together so that the snap button
snaps fully into the lock hole. To disassemble, press the snap button and
pull apart.
Compress one unlocked end of the connector and slide it through
one tube end. Compress the other end of the connector and slide the
second tube on. Lock both screws carefully using your hex key tool. Be
sure to lock securely, but do not overtighten.
Swage Snap Buttons
TCP TC TCH
ES30-90B ES30-90B
