Installation and Cabling
80-30200000-03 2-1
2. Installation and Cabling
The SBU14C is a high density rack mounted unit designed to sit in a 19"
communications cabinet. It has eight fixing points, four down each side
of the front of the frame. All eight fixing points must be securely fixed to
the frame.
The SBU6C can be rack mounted by the addition of rack mounting ears.
The ears must be securely fixed to the frame.
2.1 Mains Input and Wiring
On the rear of the unit there are three IEC mains sockets (for SBU14C)
or two IEC mains sockets (for SBU6C) for connection to independent
mains supplies. The primary earth connection is made via these
sockets.
WARNING - these appliances must be earthed.
VORSICHT - Nur eine vorschriftsmäßig geerdete Steckdose
anschließen.
Mains cables, 2 metres in length are supplied with both units. These
should be connected to a suitable mains supply. The mains plug is the
primary disconnect device for the unit. Ensure that the unit is installed
near to socket outlets and that the outlets are easily accessible.
The mains cables supplied with the unit are fitted with moulded 13 amp
plugs for connection to standard socket outlets. Should the plugs not be
of the correct type for the outlets that they are connected to, the plugs
