Installation Guide
RTR01-1000
In the Box:
RTR01-1000 Series Mobile Router
This router is rated for mobile/in-vehicle use, but is NOT rated for
water and dust ingress. Proper, secure installation within dry
environments is required. All cabling and connection points
exposed to wet outdoor conditions must be sealed for protection.
Improper installation methods, locations, and use of non-standard
accessories may void your warranty.
What you will need:
Tools- You may need a manual or electric screwdriver or other
fastening tools for your mounting hardware as well as any
Personal Protection Equipment as required by your company or
for general safety.
Mounting hardware- It is recommended to use the proper
mounting screws or other hardware necessary to secure the
router into position. You can use nuts/bolts, self-tapping screws,
zip ties, 2-sided adhesive tape, Velcro, or other hardware to fasten
the router to the surface, based on the surface and requirements
for that surface and being cautious of potential hazards or risks.
Power supply- The router is supplied as a base component only
and requires a power supply, of which there are several options
available. Using alternate power supplies may affect your product
warranty, so please use only the recommended options. Common
options are the fused 12v power cable, AC power cable, or DC
vehicle cigarette lighter cable.
Auxiliary connection cables- In order to connect the router to your
Auxiliary camera hardware, you’ll need the correct Cat6 Ethernet
cable for the RTR01-1000 unit. These are available in varying
lengths and should always be installed securely, with the
connections protected from liquid intrusion. You can also use RJ45
to 4-pin cables when attaching the RTR01-1000 to 4-pin
connectors of auxiliary cameras.
