FlexLink 5995512 Manuale utente
Created by EBCCW 96:05Created by EBCCW 00:06Created by EBCCW 96:05Created by EBCCW 00:06
Spiral Elevator
C
r
eated by EBCCW 00:06
5478EN-3
Type 5995512
User Manual
Original Instructions 2011
Created by EBCCW 96:05Created by EBCCW 00:06
Created by EBCCW 00:06
Spiral Elevator
5478EN-3
© Flexlink Components AB 2010
All Rights Reserved
No part of this program and manual may be used, reproduced, stored or
transmitted in any form or by any means without the written permission of
FlexLink Components AB. The contents of this manual are for informational
use only. All information and specifications contained in this document
have been carefully checked to the best efforts of FlexLink Components
AB, and are believed to be true and accurate as of time of publishing.
However, due to continued efforts in product development FlexLink
Components AB reserves the right to modify products and its manuals
without notice.
FlexLink Components AB assumes no responsibility or liability on any
errors or inaccuracies in this program or documentation. Any kind of
material damages or other indirect consequences resulting from any
FlexLink Components AB product part, documentation discrepancies and
errors or non-anticipated program behavior are limited to the value of
appropriate products purchased from FlexLink Components AB. The
products are delivered to the customer at the ’as is’ state and revision level
they are on the moment of purchasing, and are declared in detail in the
license agreements between FlexLink Components AB and user. User
accepts and is obliged to follow the guidelines stated in the separate
license agreement needed in using any parts of this product package.
User Manual
5478EN-3
Created by EBCCW 00:06
Page I of II
5478EN-3
Content
1 Safety....................................................... 3
1.1 System information.................................. 3
1.2 The most important safety conditions...... 4
1.3 Description of safety provisions............... 5
1.4 Safety measures to be taken .................... 6
1.5 Explanation of symbols ............................ 7
2 Technical specifications............................ 8
2.1 Technical data........................................... 9
2.2 Ordering information.............................. 10
2.3 Operating conditions .............................. 11
3 Introduction ........................................... 12
3.1 Purpose of use ....................................... 12
3.2 Description of the Spiral Elevator ........... 13
3.3 Working principle................................... 19
3.4 Control units .......................................... 21
4 Unload the Spiral Elevator ...................... 22
4.1 Preparation............................................. 22
4.2 Unloading instructions ........................... 23
5 Mounting, installation, adjustment ......... 27
5.1 Provisions to be provided ...................... 27
5.2 Assembly ................................................29
5.3 Validation ................................................33
5.4 Integration in a (transport) system .........35
5.5 Setting of the Spiral Elevator...................37
5.6 Test run - partially loaded........................39
6 Technical maintenance............................43
6.1 Check and control procedures ................43
6.2 Maintenance procedures.........................47
6.3 Troubleshooting list ................................57
6.4 Maintenance schedule Spiral Elevator.....60
7 Put out of commission............................62
7.1 Disconnect the power sources................62
7.2 Disassemble............................................62
7.3 Transport ................................................63
7.4 Disposal..................................................64
7.5 Reuse......................................................64
8 Spare parts list........................................65
8.1 Spiral Elevator 5995512..........................65
9 Supplier’s information.............................66
10 Manufacturer’s declaration......................67
Page II of II 5478EN-3
Created by EBCCW 00:06
Page 1 of 68
5478EN-3
Preface
Purpose of this manual
The purpose of this manual is to describe various operations that are
intended for the user to perform.
This document contains remarks that point out a risky or specific situation
to the user. In many cases this situation is provided with one of the symbols
given below.
Compliance with the operations described in this document is important in
order to prevent dangerous situations and unnecessary damage to
the Spiral Elevator
It is recommended to keep one copy of this manual near the machine and
one copy with your technical documentation.
Structure of the manual
The user's manual has been composed in such a way, that a number
of operations can quickly and easily be found.
This manual does not describe operations that are not intended for the user
to perform.
The user's manual has been divided into sections which describe a variety
of functions including the safety and the safe operation of the
Spiral Elevator.
It is recommended that this manual is read by all users of this equipment
with particular reference to Section 1 on page 3: Safety.
.
General warning for danger!
.
Warning for electrical voltage!
.
Attention, this is an important notice!
Page 2 of 68 5478EN-3
Requirements of the user
The Spiral Elevator should only be operated by a person who has become
acquainted with section 1 'safety' and trained in the use of the unit.
The Spiral Elevator should only be installed by persons who have become
acquainted with section 4 'unload the Spiral Elevator.
. Note! Maintenance activities on the Spiral Elevator should only
be carried out by a technically qualified person.
. Note! Technically qualified employees means: persons that have
received adequate training for carrying out the activities involved.
Safety
Created by EBCCW 00:06
Page 3 of 68
5478EN-3
1 Safety
The Spiral Elevator has been designed such, that it can be used and
maintained in a safe way. This holds for the application, the circumstances
and the instructions described in the manual. Any person working with or
on this machine should study and follow the instructions contained within
this manual.
The company or the country in which the machine is used may require
extra safety measures. This particularly applies to the working conditions.
This manual does not describe how these are to be complied with. In case
of doubt, consult your government or safety officer!
1.1 System information
The project number and/or general drawing number (identification number)
shall always be specified when communicating with FlexLink with respect
to the Spiral Elevator.
The following detail plates are generally attached to the Spiral Elevator.
Figure 1 Example of Machine plate (system supplier)
Figure 2 Spiral Elevator plate ( Manufacturer)
Safety
Page 4 of 68 5478EN-3
1.2 The most important safety conditions
Before the Spiral Elevator is put in to service, the following safety
conditions must be met:
• Provide good ambient lighting.
• Equipment users should have read and understood the operating
instructions to operate, maintain or clean the machine.
• Equipment users should not reach into the machine while it is
running. Even if the machine is not running, it may be 'on', which
means it may start operating automatically.
• Safety provisions (where fitted), such as side plating, bottom
plating, emergency stops and detectors must not be removed or
deactivated while the Spiral Elevator is running.
• Before clearing of any jams, the unit should be stopped and safely
isolated.
Indice
