Check the package content:
Package Content
NameplateWaterproof jacket1 Waterproof jacket2 Screw wrench
Cover
Waterproof jacket3 Waterproof stricker
Installation screws
Operations
-3-
Press “#+password+#”button to unlock the door(for 03IP).
Calling
In standby mode, press the call button. The corresponding indoor monitor will ring.
When 01IP is set as the wall panel, press the call button, the management center will
ring.
When 03IP is set as the unit panel, press “room No.+#” button to call the indoor
monitor, press the call button to call the management center.
Unlock(only for 02IP and 03IP)
Put your registered IC/ID card near the card reader area, then it will sound a "Di"
tone and the door is unlocked (for 02IP).