Self diagnose and repair guide
Problem: Flipper cannot detect battery
Possible root cause:
In rare cases due to extreme conditions of transportation the battery connector fit to the Main
board can be affected. In this case it is advised to reconnect the battery and make sure the fit
between two connectors is stable.
Repair workflow:
Required tools:
- Long PH0 screwdriver (other type of screwdriver may damage the screw head, be
careful)
- Plastic tweezers or opening pick if available
Step 1
Power-off your Flipper:
Step 2
Remove 4 screws and press gently in the middle of Top cover’s both sides to detach the Bottom
cover:
