FLIR SyncroIP Camera Series Manuale per l'uso e la cura

1

www.digimerge.com

SyncroIP Series Firmware Update Instructions

Follow the steps below to install firmware updates for SyncroIP cameras. After updating the

firmware, you must reset the camera to default settings (see page 3 for details).

1. Connect the cameras to the same local area network (LAN) as the computer where you will install

the firmware update.

NOTE: The cameras must be connected directly to the LAN. They cannot be connected to an NVR,

as the PoE switch on the NVR will create a sub-network that cannot be reached by other devices on

the network.

2. Download and extract the firmware file and firmware upgrade tool from www.digimerge.com.

3. Browse to the UpdateTool folder, right-click NewUpdateTool.exe and select Run as

administrator.

Right-click NewUpdateTool.exe and

select Run as administrator

4. Under Add Device, enter the IP address range you would like to search for IP cameras. For

example, if your computer is at the IP address 192.168.1.2, enter 192.168.1.1 in the first box

and 192.168.1.255 in the second box to search all possible IP addresses on your network.

5. Click Add. The Update Tool scans your network for cameras.

Enter the lowest IP address in

your search range

Enter the highest IP address in

your search range

Click Add

Last updated: June 20, 2013

2

6. Under File Path, click Browse and select the firmware update file.

Click Browse and select

firmware update file

7. Check the cameras you would like to install the firmware update on and click Update. Wait for the

firmware update to complete.

Check the cameras you

would like to update

Click Update

NOTE: The firmware update may take up to 5 minutes to complete. The status will say upgrade

over when completed.

3

www.digimerge.com

Resetting the camera to default settings

If your camera has a hardware reset button, press and hold the button for 5 seconds to reset the

camera to default settings. The camera must be connected to power to perform a factory reset.

OR

If your camera does not have a hardware reset button (e.g. DND13TL2), you can reset the camera

using a web browser.

To reset the camera using a web browser:

1. On a computer on the same LAN as the camera, open a web browser and enter the camera’s IP

address in the address bar.

TIP: You can see the IP addresses of cameras to the LAN using the UpdateTool.

2. Under User Name and Password, enter the camera’s User Name (default: admin) and

Password (default: admin) and click Login.

Enter Camera User Name (default: admin)

Enter Camera Password (default: admin)

Click Login

3. Click Default Settings.

Click Default Settings

4. Click Restore then click OK to reset the camera to default settings. The camera will reboot.

Click Restore to reset

the camera

Altri manuali per SyncroIP Camera Series

3

Indice

Altri manuali FLIR Telecamera di sicurezza

FLIR

FLIR Lorex LNC250 PING Series Manuale dell'operatore

FLIR

FLIR PTZ-35 MS Manuale utente

FLIR

FLIR PatrolIR B Manuale utente

FLIR

FLIR QUASAR CP-3211 Manuale

FLIR

FLIR C233BC Manuale utente

FLIR

FLIR C237BC Manuale utente

FLIR

FLIR C133ED Manuale utente

FLIR

FLIR T4 Series Manuale utente

FLIR

FLIR LOREX LW2770HAC1 Manuale utente

FLIR

FLIR MPX C357VW4 Series Manuale utente

FLIR

FLIR Ariel Gen III CM-3304-11-I Manuale

FLIR

FLIR Quasar CM-6405 Manuale utente

FLIR

FLIR A3 F series Manuale utente

FLIR

FLIR MPX C237VC Manuale utente

FLIR

FLIR SR-100 Manuale utente

FLIR

FLIR Lorex LNB4163 Series Manuale utente

FLIR

FLIR MPX C133BD Series Manuale utente

FLIR

FLIR Raymarine CAM200IP Manuale utente

FLIR

FLIR MPX C243EW2 Series Manuale utente

FLIR

FLIR HM-Series Manuale utente

FLIR

FLIR Quasar CP-6408-21-I Manuale utente

FLIR

FLIR MPX ME313L Manuale utente

FLIR

FLIR Quasar CP-6408-21-I Manuale utente

FLIR

FLIR Quasar CM-6206-H1-I Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente