FLIR ONE Edge Series Manuale utente

Getting started

FLIR ONE Edge

series

Distributed by:

Reduction Revolution Pty Ltd

www.reductionrevolution.com.au/FLIR

1 Illustrations

Note Explanations of the illustrations are provided in each language section.

Figure 1.1 FLIR ONE Edge camera: View from the front and from the bottom

Figure 1.2 FLIR ONE app icon

#T810602; r. AB/88817/88817; mul 1

2 EN-US English

2.1 List of contents

• Infrared camera

• USB cable

2.2 Read the manual before use

Before operating the device, you must read, understand,

and follow all instructions, warnings, and cautions pro-

vided in the manual.

Go to the following website to read or download the

manual:

https://support.flir.com/resources/99yx

2.3 Notice to user

• Register your product within 60 days to get extended warranty:

https://support.flir.com/camreg.

• FLIR Systems provides freeware and licensed software for image editing, vid-

eo processing, thermal analysis, and reporting. Download at

https://www.flir.com/support.

• For training and certification courses, go to

https://www.flir.com/support-center/training.

• Contact our Technical Support Center if you experience problems or have

any questions about your product: https://support.flir.com.

2.4 Declaration of conformity

The full text of the Declaration of conformity is available at the following internet

address: https://support.flir.com/resources/99yx.

2.5 Disposal of electronic waste

This product should not be discarded as unsorted waste but must

be sent to separate collection facilities for recovery and recycling.

#T810602; r. AB/88817/88817; mul 2

2 EN-US English

2.6 Safety information

WARNING

Applicability: Digital devices subject to 2.1091/2.1093/KDB 447498/RSS-

102.

Radiofrequency radiation exposure Information: For body worn operation,

this device has been tested touched to the phantom and meets FCC RF expo-

sure guidelines. Nevertheless, the device should be used in such a manner

that the potential for human contact during normal operation is minimized.

CAUTION

Do not use the camera in temperatures more than 50°C (122°F), unless other

information is specified in the user documentation or technical data. High tem-

peratures can cause damage to the camera.

CAUTION

The temperature range through which you can charge the battery is ±0°C to

35°C (32°F to 95°F), except for the Korean market where the approved range

is 10°C to 35°C (50°F to 95°F). If you charge the battery at temperatures out

of this range, it can cause the battery to become hot or to break. It can also

decrease the performance or the life cycle of the battery.

Note FLIR Systems AB declares that the radio equipment type FLIR ONE Edge

series is in compliance with Directive 2014/53/EU.

Note Radio operates in standard 802.11 b/g/n in frequency range 2400-2480

MHz and 5150-5260 MHz with max output power 15 dBm.

2.7 Camera parts

See 1 Illustrations, page 1.

1. On/Off button

2. Indicator LEDs

3. USB-C charging port

4. Visual camera

5. Thermal camera

#T810602; r. AB/88817/88817; mul 3

2 EN-US English

6. Extending arm

2.8 Quick start guide

1. Install the FLIR ONE app, developed by FLIR Systems, from your preferred

app store.

2. Attach the FLIR ONE Edge camera to the back of your mobile device by pull-

ing out the extending arm until the camera is clamped around the device. As

an alternative, place the FLIR ONE Edge camera close to your mobile device.

Note To prevent damage to the equipment, avoid extending the arm to its

end position.

3. To turn on the FLIR ONE Edge camera, press and hold the On/Off button un-

til the LEDs start flashing, indicating that the camera is booting up. It takes

about 20 seconds for the camera to start.

4. Start the FLIR ONE app on your mobile device.

5. The FLIR ONE app will guide you to set up the app according to your prefer-

ences and to connect (pair) the camera with your mobile device.

6. To turn off the FLIR ONE Edge camera, press and hold the On/Off button un-

til the LEDs turn off.

#T810602; r. AB/88817/88817; mul 4

last page

Publ. No.: T810602

Release: AB

Commit: 88817

Head: 88817

Language: mul

Modified: 2022-12-07

Formatted: 2022-12-07

Website

http://www.flir.com

Customer support

http://support.flir.com

Copyright

© 2022, FLIR Systems, Inc. All rights reserved worldwide.

Disclaimer

Specifications subject to change without further notice. Models and accessories

subject to regional market considerations. License procedures may apply.

Products described herein may be subject to US Export Regulations. Please

refer to [email protected] with any questions.

Distributed by:

Reduction Revolution Pty Ltd

www.reductionrevolution.com.au/FLIR

Indice

Manuali Telecamera termica popolari di altre marche

Hikmicro

Hikmicro B20 Manuale utente

BST

BST BT-72 Manuale utente

CBC

CBC EN7-S02T Manuale utente

Satir

Satir YRH600 Manuale utente

TESTO

TESTO 882 Manuale utente

TECPEL

TECPEL TIG-320 Manuale utente

SKF

SKF TKTI 21 Manuale utente

TESTO

TESTO 885 Manuale utente

InfiRay

InfiRay AT300 Series Manuale utente

InfiRay

InfiRay AT Series Manuale utente

Videotec

Videotec MAXIMUS MVXT Manuale utente

Guide Sensmart

Guide Sensmart D384M Manuale utente

NBN

NBN FLIR A6 Series Manuale utente

WORKSWELL

WORKSWELL SAFETIS Manuale utente

Major tech

Major tech MTi11 Manuale utente

COHU

COHU 5935-1000/T100 Manuale utente

MikroScan

MikroScan 7600PRO Manuale utente

Chauvin Arnoux

Chauvin Arnoux C.A 1879 Manuale utente