Milling blades:
Electrical hazards:
Always connect your power cord to a fuse box equipped with a residual-
current device (fused with a fuse of up to 16A).
Do not carry out any work with the machine outside in the rain.
The milling machine is an electrical device. To avoid shocks or fire hazards, it
is always best to follow the safety instructions.
The floor milling machine is equipped with an earthed plug. Do not replace
it for a plug without a protective earth.
Make sure you plug the machine into a socket equipped with protective
earth.
Use Floor iQ’s diamond milling blades, which are specially developed for
our floor milling machine and give the very best results.
The diamond milling blades are manufactured and certified to OSA
standards.
Floor iQ diamond milling blades meet the highest safety requirements that
can be set for a diamond product.
Do not use milling blades with an incorrect shaft hole or with a smaller or
larger diameter than prescribed.
Make sure the floor milling machine type VLFR-D4.0 is clean (keep handles
dry and free of oil or grease).
Always unplug the machine first when changing a diamond milling blade
and before removing the dust cover’s plastic nuts.
The milling blades can be sharp, so handle them with care and caution.
page 7
