Protection of the environment
Emissions and waste disposal
Observe the local regulations and codes regarding:
Reporting of emissions to the appropriate authorities
Sorting, recycling and disposal of solid or liquid waste
Clean-up of spills
Exceptional Sites – Radiation Hazard
If the product has been exposed to ionizing radiations, implement the necessary safety measures for the
protection of people. Do NOT send the product back if it has been exposed to nuclear radiation.
Recycling guidelines
Always follow local laws and regulations regarding recycling.
Waste and emissions guidelines
Do not dispose of equipment containing electrical components together with domestic waste.
Collect it separately in accordance with local and currently valid legislation.
Product warranty
For information on the warranty refer to the documentation of the sale contract.
Transportation and Storage
Inspect the delivery
Packaging inspection
Check that quantity, descriptions and product codes match the order.
Check the packaging for any damage or missing components.
In case of immediately detectable damage or missing parts:
Accept the goods with reserve, indicating any findings on the transport document, or
Reject the goods, indicating the reason on the transport document.
In both cases, promptly contact Flowtech from whom the product was purchased.
Inspection of the unit
Remove packing materials from the product.
Dispose of all packing materials in accordance with local regulations.
Inspect the product to determine if any parts have been damaged or are missing.
If applicable, unfasten the product by removing any screws, bolts, or straps.
For your personal safety, be careful when you handle nails and straps.
Contact Flowtech if there is any issue.
System Liing
Assembled units and their components are heavy. Failure to properly li and support this equipment can
result in serious physical injury and/or equipment damage. Li equipment only at the specifically identified
liing points. Liing devices such as eyebolts, slings, and spreaders must be rated, selected, and used for the
entire load being lied.
Always li the unit by its designated liing points.
Use suitable liing equipment and ensure that the product is properly harnessed.
Wear personal protective equipment.
Stay clear of cables and suspended loads.
flowcon VSD - H Inverter
7
