Fluke DSP-FTA410 Manuale utente
DSP-FTA410
Fiber Test Adapter
Users Manual
September 1998 Rev.1, 2/00
© 1998 , 2000 Fluke Corporation, All rights reserved. Printed in U. S.A.
All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
Each Fluke product is warranted to be free from defects in material and workmanship
under normal use and service. The warranty period is one year and begins on the date of
shipment. Parts, product repairs, and services are warranted for 90 days. This warranty
extends only to the original buyer or end-user customer of a Fluke authorized reseller,
and does not apply to fuses, disposable batteries, or to any product which, in Fluke’s
opinion, has been misused, altered, neglected, contaminated, or damaged by accident or
abnormal conditions of operation or handling. Fluke warrants that software will operate
substantially in accordance with its functional specifications for 90 days and that it has
been properly recorded on non-defective media. Fluke does not warrant that software will
be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to
end-user customers only but have no authority to extend a greater or different warranty
on behalf of Fluke. Warranty support is available only if product is purchased through a
Fluke authorized sales outlet or Buyer has paid the applicable international price. Fluke
reserves the right to invoice Buyer for importation costs of repair/replacement parts when
product purchased in one country is submitted for repair in another country.
Fluke’s warranty obligation is limited, at Fluke’s option, to refund of the purchase price,
free of charge repair, or replacement of a defective product which is returned to a Fluke
authorized service center within the warranty period.
To obtain warranty service, contact your nearest Fluke authorized service center to ob-
tain return authorization information, then send the product to that service center, with a
description of the difficulty, postage and insurance prepaid (FOB Destination). Fluke
assumes no risk for damage in transit. Following warranty repair, the product will be
returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that
failure was caused by neglect, misuse, contamination, alteration, accident, or abnormal
condition of operation or handling, including overvoltage failures caused by use outside
the product’s specified rating, or normal wear and tear of mechanical components, Fluke
will provide an estimate of repair costs and obtain authorization before commencing the
work. Following repair, the product will be returned to the Buyer transportation prepaid
and the Buyer will be billed for the repair and return transportation charges (FOB Ship-
ping Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PAR-
TICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF
DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty,
or exclusion or limitation of incidental or consequential damages, the limitations and
exclusions of this warranty may not apply to every buyer. If any provision of this War-
ranty is held invalid or unenforceable by a court or other decision-maker of competent
jurisdiction, such holding will not affect the validity or enforceability of any other provi-
sion. Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99
i
Table of Contents
Title Page
Introduction.......................................................................................... 1
Unpacking ............................................................................................ 2
Safety Information................................................................................ 3
Fiber Test Adapter Features ................................................................. 4
Getting Started...................................................................................... 5
Cleaning the Fiber Connections ....................................................... 6
Verifying Operation.......................................................................... 6
Summary of Fiber Test Settings ........................................................... 8
Setting Up for Fiber Tests .................................................................... 9
Selecting a Test Standard and Fiber Type........................................ 9
Setting the Remote End Configuration............................................. 10
Selecting the Adapter Type .............................................................. 10
Setting the Number of Adapters and Splices.................................... 11
Setting a Reference........................................................................... 11
Setting a Reference for Smart Remote Mode ................................... 12
Setting a Reference for Loopback Mode.......................................... 14
Setting a Reference for Far End Source Mode ................................. 15
Changing the Index of Refraction..................................................... 16
Running an Autotest............................................................................. 16
Saving Autotest Results........................................................................ 21
Autotest Results for Smart Remote Mode............................................ 22
Pass/Fail and Headroom Results for Smart Remote Mode............... 22
Loss for Smart Remote Mode........................................................... 22
Length Results for Smart Remote Mode .......................................... 24
Bi-Directional Testing.......................................................................... 25
Swapping Connections..................................................................... 25
Bi-Directional Autotest Results........................................................ 25
Autotest Results for Loopback Mode................................................... 26
Pass/Fail and Headroom Results for Loopback Mode...................... 26
Loss Results for Loopback Mode..................................................... 26
Length Results for Loopback Mode................................................. 27
Contents
(continued)
ii
Autotest Results for Far End Source Mode........................................... 28
Single Tests........................................................................................... 30
Single Tests for Smart Remote Mode ............................................... 30
Single Tests for Loopback Mode...................................................... 31
Single Test for Far End Source Mode............................................... 31
Monitoring Optical Power.................................................................... 32
Using the Talk Mode ............................................................................ 34
Using the FindFiber™Feature ............................................................. 34
Configuring a Custom Fiber Test.......................................................... 38
Fiber Test Reports................................................................................. 39
Maintenance.......................................................................................... 39
Calibration ........................................................................................ 39
Repair................................................................................................ 40
Contacting Fluke................................................................................... 40
Replacement Parts and Accessories...................................................... 40
Specifications........................................................................................ 42
General Specifications ...................................................................... 42
Optical Transmitter........................................................................... 42
Optical Receiver................................................................................ 42
Fiber Troubleshooting Guide................................................................ 43
Glossary................................................................................................ 45
Index
iii
List of Tables
Table Title Page
1. Settings for Testing Fiber................................................................... 8
2. Loss Results for Smart Remote Mode................................................ 23
3. Length Results for Smart Remote Mode............................................ 24
4. Loss Results for Loopback Mode...................................................... 27
5. Length Results for Loopback Mode................................................... 27
6. Loss Results for Far End Source Mode ............................................. 29
7. Main Unit Results for the FindFiber Test (Smart Remote Mode....... 35
8. Smart Remote LED Results for the FindFiber Test ........................... 35
9. Replacement Parts and Accessories................................................... 41
10. Common Problems in Fiber Links..................................................... 44
Contents
(continued)
iv
v
List of Figures
Figure Title Page
1. Standard Equipment........................................................................... 2
2. Features of the DSP-FTA410 Fiber Test Adapter.............................. 4
3. Attaching a DSP-FTA410.................................................................. 5
4. Connections for a Self Test................................................................ 7
5. Setting a Reference for Smart Remote Mode..................................... 13
6. Setting a Reference for Loopback Testing......................................... 14
7. Setting a Reference for Far End Source Mode................................... 15
8. Test Connections for Smart Remote Mode........................................ 18
9. Test Connections for Loopback Mode............................................... 19
10. Test Connections for Far End Source Mode...................................... 20
11. Monitoring Optical Power................................................................. 33
12. Using FindFiber with a Smart Remote............................................... 36
13. Using FindFiber with a Loopback Cable........................................... 37
Contents
(continued)
vi
1
Introduction
The DSP-FTA410 Fiber Test Adapter lets you use a DSP-4000
CableAnalyzertest tool to test and certify fiber optic cable installations. The
fiber test adapter includes the following features:
•Autotest function measures optical power loss (at 850 nm and 1300 nm)
and length on dual-fiber multimode links. Provides pass/fail results based
on common fiber test standards.
•Includes built-in support for SFF (Small Form Factor) link testing.
•With a separate laser source (such as the Fluke LS-1310/1550 Laser
Source), you can test singlemode fiber at 1310 nm and 1550 nm.
•Monitors power at 850 nm, 1300 nm, 1310 nm, and 1550 nm from optical
sources, such as test equipment and optical interface cards.
•Transmits or receives 850 nm or 1300 nm light for performing quick
continuity checks.
•Graphic Help screens show you how to make proper fiber connections.
•FindFiber™ feature helps you verify optical connectivity.
•Allows two-way voice communication over the fiber under test (using two
DSP-FTA410 units and the headsets supplied with the DSP-4000 test
tool).
•Saves fiber test results for printing or uploading to a PC.
DSP-FTA410
Users Manual
2
Unpacking
The DSP-FTA410S Fiber Test Option Set includes the following items, which
are shown in Figure 1:
•Two DSP-FTA410 Fiber Test Adapters
•Two ST/ST adapters
•Four SC/ST 62.5 µm multimode patch cords
•Two short ST/ST 62.5 µm multimode test jumpers
•DSP-FTA410 Users Manual (not shown)
•Warranty registration card (not shown)
If anything is damaged or missing, contact the place of purchase immediately.
R
E
T
P
A
D
A
T
S
E
T
R
E
B
I
F
0
1
4
A
T
F
-
P
S
ST/ST Adapters (2)
ST/ST Multimode
test jumpers (2)
DSP-FTA410 (2)
SC/ST Multimode
patch cords (4)
tt14f.eps
Figure 1. Standard Equipment
Indice
Altri manuali Fluke Adattatore
Fluke
Fluke BC190 Manuale utente
Fluke
Fluke ir3000 FC Manuale utente
Fluke
Fluke BC500 Manuale utente
Fluke
Fluke 5320A-LOAD Manuale utente
Fluke
Fluke DTX-COAX Manuale utente
Fluke
Fluke BC430/830 Manuale utente
Fluke
Fluke 1736 Manuale utente
Fluke
Fluke Norma Star Point Manuale del proprietario
Fluke
Fluke DSX-CHA021S Manuale utente
Fluke
Fluke DSP-FTA420 Manuale utente
Fluke
Fluke ir3000 Manuale utente
Fluke
Fluke DIS 90 Manuale utente
Fluke
Fluke SV225 Manuale utente
Fluke
Fluke BC430 Manuale utente
Fluke
Fluke DSP-PM11A Manuale utente
Fluke
Fluke BC430/830 Manuale utente
Fluke
Fluke 174x Manuale utente
Fluke
Fluke BC190/830 Manuale utente
Fluke
Fluke DSX-PLA004S Manuale utente
Fluke
Fluke Norma Star Point Manuale utente
