Fluke 417D Manuale utente
417D/424D
Laser Distance Meters
Users Manual
September 2019 Rev. 2, 8/19 (English)
© 2012-2019 Fluke Corporation. All rights reserved.
Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is
three years and begins on the date of shipment. Parts, product repairs, and services are warranted for 90 days. This warranty extends only to
the original buyer or end-user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries, or to any product
which, in Fluke's opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation
or handling. Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has
been properly recorded on non-defective media. Fluke does not warrant that software will be error free or operate without interruption.
Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but have no authority to extend
a greater or different warranty on behalf of Fluke. Warranty support is available only if product is purchased through a Fluke authorized sales
outlet or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of repair/replacement
parts when product purchased in one country is submitted for repair in another country.
Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or replacement of a defective
product which is returned to a Fluke authorized service center within the warranty period.
To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization information, then send the
product to that service center, with a description of the difficulty, postage and insurance prepaid (FOB Destination). Fluke assumes no risk for
damage in transit. Following warranty repair, the product will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke
determines that failure was caused by neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling,
including overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical components, Fluke
will provide an estimate of repair costs and obtain authorization before commencing the work. Following repair, the product will be returned to
the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges (FOB Shipping Point).
THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR
LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.
Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation of incidental
or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any provision of this
Warranty is held invalid or unenforceable by a court or other decision-maker of competent jurisdiction, such holding will not
affect the validity or enforceability of any other provision.
11/99
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
ООО «Флюк СИАЙЭС»
125167, г. Москва,
Ленинградский проспект дом 37,
корпус 9, подъезд 4, 1 этаж
LIMITED WARRANTY AND LIMITATION OF LIABILITY
ii
Table of Contents
Title Page
Introduction....................................................................................................................... 1
How to Contact Fluke ....................................................................................................... 1
Safety Information............................................................................................................. 1
Product Familiarization ..................................................................................................... 2
Features.................................................................................................................... 2
Before You Start ....................................................................................................... 2
Multifunction Endpiece...................................................................................... 3
Display .............................................................................................................. 4
Keypad.............................................................................................................. 6
Measurements with a Tripod............................................................................. 8
Reference Point ................................................................................................ 8
Functions .......................................................................................................................... 9
Units of Measurement............................................................................................... 9
Backlight ................................................................................................................... 9
Keypad Lock ............................................................................................................. 9
Memory..................................................................................................................... 9
Addition/Subtraction.................................................................................................. 9
Compass................................................................................................................... 10
Compass Calibration......................................................................................... 10
Magnetic Declination......................................................................................... 10
Timer......................................................................................................................... 12
Beeper ...................................................................................................................... 12
Measurements.................................................................................................................. 12
Single Distance Measurement.................................................................................. 12
Continuous Measurement......................................................................................... 12
Minimum/Maximum Tracking.................................................................................... 13
Area .......................................................................................................................... 13
417D/424D
Users Manual
ii
417D................................................................................................................. 13
424D................................................................................................................. 13
Volume ..................................................................................................................... 14
Tilt............................................................................................................................. 14
Smart Horizontal Mode..................................................................................... 14
Height Tracking ................................................................................................ 15
Leveling ............................................................................................................ 15
Tilt Sensor Calibration ...................................................................................... 16
Stake Out Measurement .......................................................................................... 16
Corner Angle Measurement ..................................................................................... 17
Indirect Measurement............................................................................................... 18
Maintenance.....................................................................................................................20
Clean the Product..................................................................................................... 20
Batteries ................................................................................................................... 20
Information or Error codes ............................................................................................... 21
Specifications................................................................................................................... 22
1
Introduction
The Fluke 417D and 424D Laser Distance Meters (Meter or
Product) are professional-grade laser distance meters. Use these
Meters to quickly and accurately get the distance to a target, the
area, and the volume measurements.
This Meter is better than an ultrasonic device because it uses
laser light waves and measures their reflection. The Meter
includes:
• Most advanced technology for distance measurements
• More accurate measurement
• Longer measurement distance – model dependent
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
• Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
• Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-921-0835
• Brazil: +55-11-3530-8901
• Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual or manual
supplement, visit http://us.fluke.com/usen/support/manuals.
To request a printed manual, visit www.fluke.com/productinfo.
Safety Information
General Safety Information is in the printed Safety Information
document that ships with the Product and at www.fluke.com.
More specific safety information is listed where applicable.
A Warning identifies hazardous conditions and procedures that
are dangerous to the user. A Caution identifies conditions and
procedures that can cause damage to the Product or the
equipment under test.
417D/424D
Users Manual
2
Product Familiarization
The manual explains features for multiple models. Because
models have different features, not all of the information in the
manual may apply to your Product.
Features
Table 1 lists the features of the Product.
Before You Start
This section has basic information about the Meter.
Table 1. Features
Feature 417D 424D
Handstrap
Multifunction endpiece
Display lines 2 4
Backlight
Keypad illumination
Keypad lock
Memory
Compass
Distance Measurement
Continuous measurement
without min/max tracking
with min/max tracking
Area
Volume
Tilt (Smart horizontal mode,
height tracking, leveling)
Stake Out
Triangular area
Pythagoras calculations
Room corner angle
Add/Subtract
Tripod measurement
Timer
Beeper
Table 1. Features (cont.)
Feature 417D 424D
Laser Distance Meters
Product Familiarization
3
Multifunction Endpiece
Use the multifunctional endpiece to adapt to multiple
measurement situations. A built-in sensor automatically senses
the orientation of the endpiece and adjusts the zero point. See
Figure 1.
• For measurements from an edge, fold out the endpiece
(90 °) until it locks into place. See Figure 2.
• For measurements from a corner, fold out the endpiece
(90 °) until it locks into place. Push the endpiece lightly to the
right side to fold it out fully. See Figures 1and 3.
Figure 1. Multifunction Endpiece
Figure 2. Edge Measurements
Figure 3. Corner Measurements
1
2
417D/424D
Users Manual
4
Display
Table 2shows the readout location on the display for each
function of the 417D.
Table 3shows the readout location on the display for each
function of the 424D.
Table 2. Display 417D
Item Description
Area
Battery Status
Laser Indication
DMeasurement Reference
EPrevious Measurement
FMeasurement (Error code will also display here.)
2
34
1
5
6
Laser Distance Meters
Product Familiarization
5
.
Table 3. Display 424D
Item Description Item Description Item Description
Battery Status HInformation OTriangle Area
Compass / Timer readout IMin/Max Measurement PIndirect Height
Memory JMeasurement Reference QCeiling Area
DAdditional Measurements /
Status KStake out RSlope Distance
EMeasurement LLeveling SWall Area
F2nd Result Available MArea/Volume TTilt Angle
GAddition Subtraction NPythagoras UCircumference
1211 13 14
15
16
19
17
18
20
21
10
1
5
6
4
2
3
8
7
9
417D/424D
Users Manual
6
Keypad
Table 4shows the buttons on the keypad on the 417D. Table 6
shows the keypad of the 424D.
Table 4. Keypad 417D
Item Description
On/Measure
Area/Units
Clear/Off
1
2
3
Table 5. 417D Button Operation
Button Pushes Function
>
1x Turn on the Product and laser.
(The battery symbol shows by
default.)
2x Take a measurement.
2 seconds Continuous measurement mode.
To cancel, push again.
=1x Start an area measurement.
2 seconds Select units of measure (see
Table 8).
<1x Clear last measurement.
2 seconds Turn off the Product.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Fluke Strumento analitico
Fluke
Fluke i430-Flexi-TF Manuale utente
Fluke
Fluke DS701 Manuale utente
Fluke
Fluke FI-3000 FiberInspector Pro Manuale utente
Fluke
Fluke 414D Manuale utente
Fluke
Fluke 434 Manuale utente
Fluke
Fluke 419D Manuale utente
Fluke
Fluke ESA601 Operators Manuale utente
Fluke
Fluke DS703 FC Manuale utente
Fluke
Fluke 43B Manuale utente
