Flurida FDFM1JA01 Manuale utente

1
w w w . f l u r i d a a p p l i a n c e s . c o m
U S E R I N S T R U C T I O N S
P o r t a b l e N u g g e t I c e D i s p e n s e r
F D F M 1 J A 0 1
SAFETY INSTRUCTIONS -----------------------------------------------------------------------------2
FEATURES & SPECIFICATIONS ---------------------------------------------------------------------4
USE OF DISPENSER ---------------------------------------------------------------------------------6
DISPENSER CARE ----------------------------------------------------------------------------------11
INSTALLATION INSTRUCTIONS -------------------------------------------------------------------14
TROUBLESHOOTINGS------------------------------------------------------------------------------15
SERVICE & IMPORTANT NOTICE ------------------------------------------------------------------16
G E N E R A L O P E R A T I N G I N S T R U C T I O N
Read these instructions before use and save them for future reference.
Let the unit rest and remain unplugged for 24 hours before use.
Remove all external and internal packaging materials. Be sure that all parts
have been included before discarding any packaging materials. You may
want to keep the packaging materials for use at a later date.
Contact customer service at 800-433-9938 or info@fluridaappliances.com.

2
2
i n f o @ f l u r i d a a p p l i a n c e s . c o m
SAFETY INSTRUCTIONS
Electrical Safety
DANGER
Improper use of the power cord plug can result in the risk of
electrical shock, property damage and personal injury or death.
Unplug the unit or disconnect power before performing any
maintenance.
Upon receipt and inspection of the unit the power cord must be
replaced if it is damaged.
This appliance is equipped with a 3-prong
grounding-type plug and shall be plugged into a
properly connected grounding-type outlet.
It is required to use a 3–prong grounding-type
electrical outlet properly grounded in accordance
with the National Electrical Code and local codes
and ordinances.
A separate adequately fused and grounded circuit
shall be used for this appliance. The voltage rating
must match the rating label on the unit.
Do not use an adapter or an extension cord.
Do not under any circumstances cut or remove the third ground prong from
the power cord.
Never unplug the appliance by pulling the power cord. To disconnect the
unit always grip the plug firmly and pull straight out from the wall outlet.
Do not operate the appliance if the appliance housing is removed or
damaged.
Do not attempt to repair or replace any part of your appliance unless it is
specifically recommended in this manual. All other servicing shall be
referred to a qualified technician.
To protect against electric shock do not immerse appliance plug or cord into
water or other liquids.
Child Safety
Exercise caution and use reasonable supervision when appliance is used
near children. Never allow children to operate the unit. Keep packing
materials away from children.
Keep fingers out of dispense point area.
Cleaning
DANGER
To reduce the risk of injury when cleaning your appliance follow
these basic precautions.
Unplug the appliance or disconnect power before performing any

3
24412 Main St. Suite 105, Carson, CA 90745
maintenance.
Do not clean appliance with flammable fluids. Do not store or use gasoline
or other flammable vapors or liquids in the vicinity of this or any other unit.
The fumes can create a fire hazard or explosion.
Do not use solvent-based cleaning agents or abrasives on the interior or
exterior of the appliance. These cleaners may damage or discolor the
appliance.
Do not operate the appliance with wet hands, while standing on a wet
surface, or while standing in water.
Disposing
CAUTION
When disposing of refrigerated appliances, special handling is
often required. It is the consumer’s responsibility to comply with
federal and local regulations when disposing of this product.

4
4
i n f o @ f l u r i d a a p p l i a n c e s . c o m
FEATURES & SPECIFICATIONS
Overview
This compact automatic ice dispenser allows you to enjoy chewable ice with
the touch of a button. Water fill through push-to-open or removable door
makes it portable and easy to use.
Features and Parts
1. Display Panel
2. Ice Dispense Point
3. Water Fill Port
4. Air Vent
5. Water Drip Tray
6. Power Cord
7. Drain Tube Plugs/Holder
This compact automatic ice dispenser allows you to enjoy chewable ice with
the touch of a button.
The built-in ice engine can quickly make nugget ice within only 15 minutes
and produce 26 lbs of ice per day.
Automatic cleaning and descaling programs can keep the unit in a good
sanitary and operational condition all the time.
Water fill through push-to-open or removable door provides you with the
convenience to use it anywhere.
Detachable drain tubes are easy to use and no plumbing is required.
Metallic silver front face and gloss black body give a sleek and modern appearance.
Less than 17.5 inches in height allows for installations on any counters and
tables.

5
24412 Main St. Suite 105, Carson, CA 90745
Specifications
Product
Portable Nugget Ice Dispenser
Model No
FDFM1JA01
Ice Type
Chewable Nugget Ice
Ice Production Capacity (75°F Air)
26 lb / 24 h
Ice Storage Capacity
2 lb
Water Reservoir Capacity
100 fl oz
Ice Dispensing Actuation
Touch Button
Drip Tray
Magnetically Detachable
Drain Plumbing
Not Required
Water Supply
Manual Fill
Water Fill Port
Push to Open / Removable Door
Touch Buttons
Make Ice, Clean, Dispense Ice
LED Notifications
Making Ice, Cleaning, Water Level, Power
Operating Temperature
50~90 °F
Electrical Rating
115V/60Hz/2.5A
Refrigerant
R600a
Installation
Countertop
Unit Dimensions
12”W x 16” D x 17-1/2”H
Net Weight
40 lb

6
6
i n f o @ f l u r i d a a p p l i a n c e s . c o m
USE OF DISPENSER
NOTE
Clean the unit once a week to prevent high water TDS and
hardness.
Descale the unit with citric acid once a month to prevent sediment
building up.
Sanitize the unit with chlorine bleach once a month to prevent
bacteria growing.
NOTE
Use potable water only.
Water TDS level must be 5~400 mg/L or PPM.
Water Hardness must be no greater than 10 grains/gal (180 mg/L).
Display
Make Nuggets Button
It can be used when the unit is not in the Cleaning mode.
Press once to start making ice, the Making Ice LED flashes slowly while the
unit is currently making ice.
Press and hold for 3 seconds to stop making ice, the Making Ice LED goes
off.
Clean Button
It can be used when the unit is not in the Ice Making mode.
It can be used for defrosting, flushing, descaling or sanitizing process.
Press and hold for 3 seconds to start Cleaning, the Cleaning LED flashes
slowly while the unit is currently in cleaning process.
Press and hold for 3 seconds again to stop Cleaning, the Cleaning LED goes
off.

7
24412 Main St. Suite 105, Carson, CA 90745
LED illuminates when the unit is plugged into power.
Red LED flashes when more water is needed.
Green LED illuminates once water is full.
Blue LED flashes slowly while the unit is currently making ice.
Green LED illuminates once the ice bin is full.
LED flashes slowly while the unit is currently in cleaning process.
LED flashes quickly once cleaning is needed for defrosting process.
FIRST TIME USE
For the first time use flush the unit following instructions below.
For the first time use dispense several cups of ice and then discard
them.
1. Filling the water reservoir for the first time use
Remove the reservoir door by pulling its two sides outwards.
Add potable water to MAX WATER FILL.
Replace the magnetically attached door.
2. Flushing the unit for the first time use
Plug the unit into power.
Press and hold Clean button for 3 seconds to start the Cleaning mode for
flushing process.

8
8
i n f o @ f l u r i d a a p p l i a n c e s . c o m
Unplug the unit when the flushing process is complete (it takes 30
minutes and the Cleaning LED goes off).
Pull the drain tubes with plugs/holders out of the unit back and lower
them to a bucket or sink.
Remove the plugs/holders to release water.
Replace the plugs/holders and put the tubes with plugs/holders back to
the unit.
3. Making ice for the first time use
Add potable water to the MAX WATER FILL.
Plug the unit into power.
Press Make Nuggets button once to start making ice. The Making Ice LED
will flash slowly to indicate the unit is currently making ice.
Filling the water reservoir when the Water Level red LED flashes
NOTE
Do not add water until Water Level red LED flashes.
Do not overfill the reservoir otherwise it may overflow when ice
melts completely.

9
24412 Main St. Suite 105, Carson, CA 90745
Push the fill port door to open.
Add potable water until the Water Level green LED illuminates with 5
beeps.
Release the fill port door to close.
Or
Add potable water between MAX WATER FILL and MIN WATER FILL.
Dispensing Ice
NOTE
The unit does not dispense ice while Cleaning LED flashes.
Dispense Nuggets button
The unit will stop dispensing automatically after 60 seconds elapse.
Place a cup under the ice dispense point.
Press and hold to dispense ice, release to stop.
Combination Buttons
It can be used when the unit can’t dispense ice because ice is jammed.
While you hold Dispense Nuggets button, press and hold Clean button to
turn the ice auger backwards.
Cleaning the pump protector
Drain water following instructions in Section 2.
Remove the water reservoir door and lift up the pump protector.
Clean the pump protector with dishwashing liquid and rinse it with
potable water.
Replace the pump protector

1
0
10
i n f o @ f l u r i d a a p p l i a n c e s . c o m
Altri manuali per FDFM1JA01
3
Indice
Altri manuali Flurida Macchina per il ghiaccio




















