FLYBOT FLUX Manuale utente

FLUX

User Manual

FLUX - Manual 1/25

Please read this manual carefully

and follow the instructions

Index

1 Safety Instructions........................................................................................................................3

2 Part List........................................................................................................................................ 4

3 Specification.................................................................................................................................

4 What else you need......................................................................................................................

5 Wing Assembly.............................................................................................................................8

5.1 Carbon rods.......................................................................................................................... 8

5.2 Balsa elevons.......................................................................................................................9

5.3 Rudder horns......................................................................................................................11

5.4 Servo and Linkage..............................................................................................................11

5.5 Winglets.............................................................................................................................. 13

5.6 Taping and Finish................................................................................................................ 14

6 Fuselage Assembly....................................................................................................................15

6.1 Fuselage preparations........................................................................................................15

6.2 Component installation / Servo extension cables................................................................16

6.3 Camera mount.................................................................................................................... 1

6.4 Motor.................................................................................................................................. 18

6.5 Wing mounts.......................................................................................................................19

6.6 Fuselage finish....................................................................................................................20

Flying.......................................................................................................................................... 21

.1 Attaching the Wings............................................................................................................21

.2 Control surface...................................................................................................................22

.3 Center of Gravity................................................................................................................. 23

.4 Maiden Flight...................................................................................................................... 24

FLUX - Manual 2/25

Thank you for purchasing the FLUX.

Fly safe, have fun!

1 Safety Instructions

•Choose your flying location wisely. Check for hazards and avoid endangering you, others,

animals or property.

•Don't fly in storms, strong winds, and generally bad weather.

•Never fly near people, houses, traffic, airports or powerlines.

•Check the regulations on RC model flying in your country.

•Do a pre-flight check. Do it every(!) time you take off. Check if the wings are firmly attached

and fully inserted. Check the control surfaces, motor and propeller.

•Not recommended for children under twelve. Children should be accompanied by a

responsible adult.

FLUX - Manual 3/25

2 Part List

24x M3 x 10mm raised head screw

4x M3 x 16mm raised head screw

10x Spacer bolts 30mm

2x Main plate

1x Cam shield

1x Motor mount

2x cam mount

2x Wing mount B

2x Wing mount A

FLUX - Manual 4/25

2x Wing (left & right)

2x Carbon rod 330 x 5 x 1mm

2x Carbon rod 8 x Ø5mm

2x Carbon rod 198 x Ø5mm

2x Balsa elevons

2x Rudder horn

2x Winglets

4x Plastic screw M4x25mm

FLUX - Manual 5/25

1x Hook & loop strap

2x Sets of servo linkages

2x Servo extension cables

4x Wing mount C

2x Optional antenna mount

1x Motor spacer

1x Decal

FLUX - Manual 6/25

3 S ecification

Wing span: 900mm

Length: ~300mm

Take off weight: 500-800g

Fuselage Material High quality carbon fiber, Polyamid

Wing load: 30 – 50 g/dm²

Center of gravity 132mm (see chapter .3)

4 Tools

•Cutter

•Wide transparent scotch tape

•Superglue

•Side cutter or metal saw

FLUX - Manual /25

5 Wing Assembly

5.1 Carbon rods

Left wing & right wing

2x 8x5mm carbon rods

2x 198x5mm carbon rods

2x 330x6x1mm carbon rods

Put the rods in the corresponding slots on the left & right wing. Make sure, that the carbon rods are

inserted fully and lay flat on the bottom of the slot. Glue them in place using superglue.

The Superglue drys a bit slower inside the slots. Activator shortens the time a bit.

FLUX - Manual 8/25

5.2 Balsa elevons

2x Balsa elevon

Tape

Use tape or foil to cover all sides of the elevons to protect them from dirt and water and make them

more ridgid.

To attach the elevons to the wings, we recommend the following procedure:

Use high grade wide (~5cm) scotch tape. Cut a piece almost as

long as the elevon. Put the tape on the bottom side (elevon is

upside down in the picture) of the elevon so that half of the tape

overlaps.

Put the wing bottom up and bring the elevon to the wing. Hold the elevon in full top deflection. Now

press the overlapping tape gently onto the wing. Start in the middle and work your way to both

ends. After the tape is in place press it firmly onto the wing.

FLUX - Manual 9/25

Fold the elevon to the other side so that it lays on the bottom side of the wing. You should see a bit

of bent tape between the wing and the elevon. Make sure the edge of the rudder is aligned to the

edge of the wing.

Use another strip of tape and cover the hinge and secure it in place. Take care that both tapes are

touching to make a strong hinge.

For the hinge to have its full strength the ta es have to touch each other!

Fold the elevon back and check if it can be easily moved and has little play.

FLUX - Manual 10/25

Indice

Manuali Giocattolo popolari di altre marche

marklin

marklin 37321 Manuale utente

Canon

Canon PAPER CRAFT Manuale utente

GREAT PLANES

GREAT PLANES Pitts M-12S Manuale utente

NOCH

NOCH 14261 Manuale utente

Hausler

Hausler 450 SE V2 Manuale utente

Dynaflite

Dynaflite Daydream Manuale utente

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manuale

Kenner

Kenner Batman 63651 Manuale utente

LEGO

LEGO 8527 Manuale utente

iKarus

iKarus ECO 8 Manuale utente

Multiplex

Multiplex EasyStar II Manuale di istruzioni

Walkera

Walkera 38 Manuale di istruzioni

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manuale utente

MD MXION SWD Manuale utente

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manuale utente

marklin

marklin 39671 Manuale utente

Meccano

Meccano 15103 Manuale utente

LEGO

LEGO TECHNIC 8735 Manuale utente