FlyInside B-47G-2A1 Manuale utente
FlyInside B-47G-2A1 User Manual
By FlyInside Inc.
Programming - Dan C.
Flight Dynamics – Rick M.
Modeling & Artwork – Tony F.
Quick Tips
Ensure that all flight assists are set to Off.
Flight assists interfere with the FlyInside Flight Dynamics Engine, and
may cause various controls such as the anti-torque pedals not to
function. To disable flight assists:
1. Load a flight
2. Press “Escape”
3. Click the “Assistance Options” button
4. Ensure that all “PILOTING” options are set to “OFF”
Marketplace Version Heli Manager
The website and Marketplace versions of the B-47 are nearly identical.
They contain the same artwork, systems, customizability, and flight
dynamics. The only difference is the “Heli Manager.”
In the marketplace version of the B-47, the Heli Manager is built right
into the cockpit, instead of running as a separate program. To dismiss it,
click the “X” on the upper right corner.
To open Heli Manager again, simply flip the Heli Manager switch on the
bottom center of the helicopter panel.
Table of Contents
1. Introduction
2. Installation and Activation (Website Version Only)
3. Flight Controls Setup
4. Flight Model Options
5. Helicopter Flight
6. Startup Procedures
7. Cockpit Diagram
8. Common Issues
A Special Thanks to Our Beta Testers
We’d like to thank everyone who helped to test, debug, and shape
this helicopter. We couldn’t have done it without them.
Brandon Filer
Drew “Bel Geode” Bolton
FredOData (Youtube Channel)
John Hargreaves
Paul T
RotorSimPilot
Sérgio Costa
Twotonemurphy
1. Introduction
Welcome to the FlyInside B-47G-2A1. With this aircraft, we’ve
attempted to authentically recreate the B-47G-2A1 for Microsoft Flight
Simulator. The 47 ships with highly realistic flight dynamics, accurate
systems, and beautiful artwork. We hope that you enjoy this
experience!
2. Installation and Activation
These instructions apply only to the website version of our software.
The Marketplace version installs and activates via the MSFS
Marketplace.
The FlyInside B-47G installs via an easy-to-use setup program. If you
encounter any issues, cannot find your installer, or haven’t received a
license key, please contact support@flyinside-fsx.com
1. Download the installer via the link on your purchase receipt page
2. Double click the installer to run, and accept any prompts that appear.
3. Click through the installer
4. Double check that the installer correctly locates your MSFS
Community packages folder. If this location is not correct, MSFS will not
detect the aircraft.
5. After the installer completes, allow it to launch FlyInside Heli
Manager.
A Note on FlyInside Heli Manager
Marketplace Version Differences? In the Marketplace version of the B-47,
the Heli Manager is integrated into the helicopter itself, rather than running
as a separate application. Heli Manager is used only to configure the
flight model. Activation and copyright are handled by Marketplace. See
the pictures on Page 3 of this document.
FlyInside Heli Manager handles copyright protection for the FlyInside B-
47G, and allows you to customize the flight model. By default, FlyInside
Heli Manager will run in the background when you turn on your
computer.
FlyInside Heli Manager doesn’t log any data, or call home randomly. It
will communicate with our servers when you activate a license key, and
occasionally to check for new versions. It’s also designed to use
minimum system resources, it won’t affect frame-rates or heat up your
CPU while running in the background.
FlyInside Heli Manager runs in the background purely for convenience,
so that you won’t need to launch it manually when flying our
helicopters. If you prefer though, you can turn off the System Start
option (via Task Manager), and launch FlyInside Heli Manager manually
as needed.
6. Open Microsoft Flight Simulator, and select the FlyInside B-47G as your
aircraft. Note that the B-47G will appear in the Airplanes category,
despite the fact that it is a helicopter.
7. Select a departure airport and load a flight. The first time you load
the FlyInside B-47G may take several minutes as MSFS compiles our
flight-model code for your PC. Once loaded, the B-47 will have an in-
cockpit message prompting you to run FlyInside Heli Manager, or to
enter an activation key.
Indice
Altri manuali FlyInside Giocattolo
