Flytec SensBox Manuale utente

Quick start guide SensBox

Bräuniger GmbH Dr. Karl Slevogt Str. 5 D-82362 Weilheim

www.brauniger.com

Quick start guide SensBox

1. Table of contents

2. Operating elements ...................................................................................................................... 3

3. General information..................................................................................................................... 4

4. Startup.................................................................................Fehler! Textmarke nicht definiert.

5. Switching-on/and –off the SensBox ........................................................................................... 5

6. Firmware update .......................................................................................................................... 5

7. Selection and settings of display mode ..................................................................................... 6

8. Summary of operation levels...................................................................................................... 8

9. Description of single modes........................................................................................................ 9

7.1 Altimeter.................................................................................................................................. 9

7.2 Variometer............................................................................................................................... 9

7.3 Air pressure display............................................................................................................. 10

7.4 Magnetic compass ................................................................................................................ 10

7.5 GPS - Speed over Ground. .................................................................................................. 11

7.6 Position by GPS..................................................................................................................... 11

7.7 Time of day............................................................................................................................ 12

7.8 Recording memory............................................................................................................... 12

7.9 G-Display............................................................................................................................... 13

7.10 Acoustic mode .................................................................................................................... 14

10. Data transfer via Bluetooth 4.0 LE ....................................................................................... 14

11. Evaluation of recorded flight- or trip data.......................................................................... 15

12. Technical data ......................................................................................................................... 16

13. Guarantee ................................................................................................................................ 16

14. Notes ........................................................................................................................................ 16

Quick start guide SensBox

2. Operating elements

The present quick start guide is based on Firmware version 1.00.06. All technical data

are subject to modifications. Please watch out on our website for new firmware

versions and adaptations of this manual.

On-/Off switch

Access for Micro USB,

jack and SD card

Status display

Menu display

Measured data

Control keys

Quick start guide SensBox

3. General information

The SensBox is a universally usable Sensor platform for leisure activities in a wide

and varied range. The measurements provided by this device serve as information

for the user and are intended to support him in his activity. The instrument

records his movements in 3D on a SD-card in the internationally common *.igc

format. The *.igc file is provided with a digital signature which will make visible

possible manipulations of the file.

The execution of all activities is however always carried out in one's own

responsibility. Bräuniger GmbH may never be held responsible for a possible

malfunction of the SensBox in no application whatsoever. The casing is

waterproof. Therefore the SensBox can be used for all outdoor activities.

4. Startup

The SensBox is supplied with the following components:

a. USB cable

b. USB plug-in power supply for 100 … 240 V~

c. 4 GB SD smart card ( inserted into the device )

d. carrying pouch

Before the first switch-on of the SensBox please check if all parts are present.

As the next step the built-in Lithium-accumulator should be charged once.

For this purpose please connect the USB cable with the SensBox and the plug-in

power supply. The charging process will be automatically stopped upon fully

charged battery and will last several hours according to battery status. Due to the

fact that it is a standardized USB interface, the SensBox can also be charged at

other USB charge ports.

Quick start guide SensBox

5. Switching on/and -off the SensBox

Please press the On/Off key, the display shows „ON“, then press the „OK“ key for

confirmation. The instrument will then automatically switch to operation mode

via display of the device's serial number and of the installed firmware version.

Switch-off: if the Switch-on/-off key is pressed for at least 3 sec., the display shows

„OFF“, which is then confirmed with „OK“. By this process all data are stored on

the SD card.

6. Firmware update

In general the SensBox is provided with the current firmware. However, because

time and again improvements, or the removal of bugs require an adaptation of the

firmware, it is recommended to watch for the currently valid firmware.

Upload of a new firmware: Switch-off the instrument. Insert the SD card with

the new firmware file into the device.

Press the key and simultaneously press a long time the Switch-on/-off key.

The device queries OK? -> Confirm by pressing the key.

Quick start guide SensBox

Reset: If the device does not perform as expected (crash of the firmware) one can

reset it by simultaneously pressing the keys and as well as the on-off

switch.

7. Selection and settings of diyplay mode

Handling of the SensBox is in principle self-explanatory and easy. After

switch-on the altimeter function is always displayed. The basic setting of the

altimeter is adjusted in the factory to the 1013 hPa standard. If display of the

current altitude value for the respective location is required, the SensBox must

be adjusted to the actual atmospheric pressure, such as any other barometric

altimeter. This is performed in menu item Air pressure, unless the actual altitude

value is known and can therefore be adjusted.

Each further pressing on the „OK“ key shifts to the next display mode.

In the current firmware 1.00.06 are available 9 ( 10 ) modes:

Altimeter

Variometer - optical and acoustical

Air pressure ( QNH )

Magnetic compass

GPS Speed over Ground

GPS Position

Time of day ( UTC )

Memory display

Acceleration ( momentarily not yet active )

Volume

According to the mode which is displayed, it may be necessary to execute

an adjustment of the display.

This procedure is in principle the same for most of the display

modes. Therefore it is exemplarily described and illustrated

here in detail only once.

At this point the correction of altitude display is described.

As the altitude display is changed according to atmospheric pressure,

it is necessary to perform a correction in order to have a correct barometric

altitude display during a flight.

Quick start guide SensBox

The example presents on the display the

altitude of 520 m, however, the actual altitude is 470 m.

For access into the Set Mode the key must be pressed for at

least 3 sec. Then the SensBox is shifted to Set Mode, the altitude

display is flashing.

By use of the arrow keys „up“ or „down“ the altitude display

can now be adjusted to the correct value –as far as known.

Either confirm the value with „OK“ , or wait for 30 sec. until the

flashing stops. The new value is automatically accepted.

If no altitude is known, but the daily updated air pressure, it is

possible to rectify this known value in mode "Air pressure".

The proceeding is identical. Afterwards the altitude display is

adjusted automatically.

Caution: all settings can also be performed by use of a small PC-Tool

SensboxConfig. The programme is available for Windows and MAC-

computers. The tool can be downloaded from our website free of charge,

or it is downloaded directly from the SD card on which it is stored, such

as this quick start guide. Please refer to Notes on page 16.

Quick start guide SensBox

8. Summary of operation levels

Function

Units ↑↓

Arrow keys

Set

Set Special

Alti,

99999

m, ft, FL

Altitude

Vario

+/-99.9

m/s, ft/min*100

Filtering

Pressure

1099.9

hPa, inHg

QNH

Offset

Compass or

Track

359° N

Only °

Compass or

Track

Calibration

Speed

999.9

km/h, mph, kt

Position

47°N ->

15.387’N ->

8°E ->

17.389’E

dd°mm.mmm‘

Time of day

23:59

Europe, America

UTC Offset

Flight time,

Recording time

9:59:59

Automatic,

Semi-automatic,

Manually,

Memory

0-99%

Level, free storage

space

Recording

interval

Pairing

5-3 (number

of partners –

partner-

number)

Flylink or

BlueTooth

Volume Buzzer

0 up to 4

Louder/Lower step

as number

Audio Settings

More Audio

Settings

Quick start guide SensBox

9. Description of single modes

7.1 Altimeter

The barometric altitude is displayed through an air pressure sensor.

The altitude value can be displayed in meter = m, or feet = ft.

Switching of measurement unit is performed by one of the arrow keys.

‹ Active functions

‹ Selected mode

‹ Measurement or default value,

presently altitude 446 m

7.2 Variometer

The Vario display is presented exclusively in digital form. In addition the

SensBox is equipped with an acoustical Vario for rise and sink rates. The

volume can be modified in Acoustic mode. For this reason the SensBox is

also ideally suited as Back-Up Vario for paraglider and hang-glider pilots.

‹ Vario display: 0.0 m/s

Quick start guide SensBox

7.3 Air pressure display

The current air pressure QNH can be displayed in hPa as well as in inHg.

The necessary adaptation is performed as described under point 7.

‹ Air pressure display 28,03 inHg

7.4 Magnetic compass

Display is executed digitally in degrees.

‹ The SensBox points in longitudinal axis to 178°

Indice

Altri manuali Flytec GPS

Flytec

Flytec 6020 Manuale utente

Flytec

Flytec 5030 GPS Manuale utente

Flytec

Flytec 5030 GPS Manuale utente

Flytec

Flytec 5030 GPS Manuale utente

Flytec

Flytec 6040 Manuale utente

Flytec

Flytec 5020 Come usare

Flytec

Flytec 6030 Manuale utente

Flytec

Flytec 6040 Manuale utente

Flytec

Flytec ELEMENT Manuale utente

Flytec

Flytec 5020 Manuale utente

Flytec

Flytec 6015 Manuale utente

Flytec

Flytec 6015 Manuale utente

Flytec

Flytec 5020 Manuale utente

Manuali GPS popolari di altre marche

Raven

Raven Cruizer II Manuale

Hama

Hama 53118 Manuale utente

Garmin

Garmin SOUNDER 125 Manuale utente

Garmin

Garmin DEZL 580 Manuale utente

Jigabot

Jigabot EX Manuale utente

Pointer

Pointer Cellocator CelloTrack XT LTE Guida all'installazione

Queclink

Queclink GV55LITE Manuale utente

Voxson

Voxson Voxtrack GPS500 Manuale di istruzioni

Garmin

Garmin ECHOMAP PLUS Manuale utente

Starcom Systems

Starcom Systems Kylos Compact Manuale utente

Garmin

Garmin 15 H Series Manuale utente

Cobra

Cobra Marine MC 600Ci Manuale utente

Cellocator

Cellocator CelloTrack T Manuale utente

Enfora

Enfora Mini-MT GSM2228UG001 Manuale utente

Magellan

Magellan eXplorist 100 Manuale utente

LTE

LTE G50B Manuale utente

Garmin

Garmin DEZL OTR500 Manuale utente

SkyGolf

SkyGolf SkyCaddie SG1 Manuale utente