FMN Alpha DSL WTM PC Manuale utente

alpha® DSL WTM PC / alpha® DSL WTM LP

Instructions for use

ADSL modem

alpha DSL WTM PC /

alpha DSL WTM LP

Safety precautions

The ADSL modem complies with the European norm EN60950 – safety of information

technology equipment.

l Do not use or install your unit in rooms with explosive material!

l Do not touch the device terminals with metallic or sharp objects!

l The connection cables of the unit may only be plugged into the

designated sockets!

l Never install the unit during a thunderstorm!

l Protect the unit from heat sources and direct sunlight!

l Protect the unit from dust, humidity, aggressive liquids and steam!

l The unit may only be connected to approved accessories!

l The unit should only be passed on to a third party including complete

operating instructions!

l When the ADSL modem has reached the end of its service life, it has

to be disposed of in an environmentally friendly manner!

alpha DSL WTM PC

2 3

5 4

DSL modem power supply PCB

LEDs:

1 DSL LED for the condition of the DSL connection

2 Power LED for the operating condition of the modem

3 LAN LED for the condition of the LAN connection

Connections:

4 DSL DSL input for the connection to the splitter

5 USB / LED USB connections / connection for external LED for DSL signalling

6 LAN standard Ethernet connection for PC or network devices

7 PCI PCI connector according to PC/104-Plus specification

8 ISA 8 bit and 16 bit-ISA connector according to PC/104 specification

9 Connection for internal voltage supply

(only at version alpha DSL WTM PC AD and alpha DSL WTM PC BD)

Version with power supply PCB see type plate:

l version alpha DSL WTM PC AD for ITUG.992.1 Annex A

l version alpha DSL WTM PC BD for ITUG.992.1 Annex B (G.dmt 1TR112 (UR2))

Version without power supply PCB:

l version alpha DSL WTM PC A for ITUG.992.1 Annex A

l version alpha DSL WTM PC B for ITUG.992.1 Annex B (G.dmt 1TR112 (UR2))

Checking the content of the package

Scope of delivery:

l DSL modem alpha DSL WTM PC

l power supply PCB and 3-core connecting wire (depending on version)

l DSL adapter cable (RJ45 socket on 2-pole connector)

l LAN adapter cable (RJ45 socket on 10-pole connector)

l LED (LED at 6-pole connector)

l instructions for use

alpha DSL WTM LP

2 3

5 4

DSL modem power supply PCB

LEDs:

1 DSL LED for the condition of the DSL connection

2 Power LED for the operating condition of the modem

3 LAN LED for the condition of the LAN connection

Connections:

4 DSL DSL input for the connection to the splitter

5 USB / LED USB connection / connection for external LED for DSL signalling

6 LAN standard Ethernet connection for PC or network devices

7 input internal power supply at DSL modem

8 output internal power supply to DSL modem

9 input external power supply at power supply PCB

Version with power supply PCB see type plate:

l version alpha DSL WTM LP AD for ITUG.992.1 Annex A

l version alpha DSL WTM LP BD for ITUG.992.1 Annex B (G.dmt 1TR112 (UR2))

Version without power supply PCB:

l version alpha DSL WTM LP A for ITUG.992.1 Annex A

l version alpha DSL WTM LP B for ITUG.992.1 Annex B (G.dmt 1TR112 (UR2))

Checking the content of the package

Scope of delivery:

l DSL modem alpha DSL WTM LP

l power supply PCB and 3-core connecting wire (depending on version)

l DSL adapter cable (RJ45 socket on 2-pole connector)

l LAN adapter cable (RJ45 socket on 10-pole connector)

l LED (LED at 6-pole connector)

l 2-core power supply line

l instructions for use

Connection alpha DSL WTM PC

Connecting alpha DSL WTM PC

In the following picture you can see how you have to cable the modem:

LED

20,1

14,8

LED

LAN

adapter cable

DSL

adapter cable

opening in front plate

for RJ45 socket

LAN

adapter cable

DSL

adapter cable

1. At the versions alpha DSL WTM PC AD and alpha DSL WTM PC BD, modem and

power supply PCB are attached to each other and the two 3-pole connections for

the internal power supply are connected with the 3-core connection line. Modem

and power supply PCB are to be attached to a PC/104 slot.

At the versions alpha DSL WTM PC A and alpha DSL WTM PC B, the modem is

to be attached to a PC/104 slot.

The power supply is realized only over the PC/104 slots.

2. The provided LAN adapter cable is attached to the 10-pole LAN socket of the

modem. The RJ45 socket can be snapped into the appropriate opening of a

front plate.

3. The provided DSL adapter cable is attached to the 2-pole DSL socket of the

modem. The RJ45 socket can be snapped into the appropriate opening of a

front plate.

4. The provided LED can optionally be attached to the 6-pole USB / LED socket of the

modem.

5. By means of usual Ethernet connection cables, the DSL socket of the DSL adapter

cable can be connected with the splitter and the LAN socket of the LAN adapter

cable can be connected with a PC or another network device.

Note:

The non-compliance with the operating voltage at the PC/104 connectors can lead

to the destruction of the modem.

Connection alpha DSL WTM LP

Connecting alpha DSL WTM LP

In the following picture you can see how you have to cable the modem:

LAN

adapter cable

LED DSL

adapter cable

power supply

cable

power supply

cable

LAN

adapter cable

LED DSL

adapter cable

opening in front plate

for RJ45 socket

20,1

14,8

1. At the versions alpha DSL WTM LP AD and alpha DSL WTM LP BD, modem

and power supply PCB are connected over the 3-pole connections for the internal

power supply with the 3-core connecting line.

2. The supplied LAN adapter cable is connected to the 10-pole LAN socket of the

modem. The RJ45 socket can be snapped into the appropriate opening of a front

panel.

3. The supplied DSL adapter cable is connected to the 2-pole DSL socket of the

modem. The RJ45 socket can be snapped into the appropriate opening of a front

panel.

4. The provided LED can optionally be attached to the 6-pole USB / LED socket of the

modem.

5. By means of usual Ethernet connection cables, the DSL socket of the DSL adapter

cable can be connected with the splitter and the LAN socket of the LAN adapter

cable can be connected with a PC or another network device.

6. For the power supply, the provided 2-core power supply line is connected to the

2-pole socket for the power supply of the power supply PCB at the versions

alpha DSL WTM LP AD and alpha DSL WTM LP BD. At the versions

alpha DSL WTM LP A and alpha DSL WTM LP B connect the provided 2-core

power supply line at the 3-pole socket (PIN 1 and 2) for the power supply at the

DSL modem.

Connection

Assignment of the connecting sockets

1. DSL connecting socket 2-pole on modem PCB for the connection to the DSL splitter

DSL connecting socket 2-pole RJ45 socket at DSL adapter cable

PIN Assigned with

1 DSL signal

2 DSL signal

JST S2B-PH-SM4-TB (LF)

2. LAN connecting socket 10-pole on modem PCB for Ethernet connectin with computer

network devices with 10 or 100 Mbit/s

LAN connecting socket 10-pole RJ45 socket at LAN adapter cable

PIN Assigned with

1RX+ (Receive +)

2RX - (Receive -)

3TX + (Transmit +)

4 not used

5 not used

6TX - (Transmit -)

7, 8, 9, 10 not used

Tyco/AMP 5-104069-4







PIN Assigned with

1RX+ (Receive +)

2RX - (Receive -)

3TX + (Transmit +)

4 not used

5 not used

6TX - (Transmit -)

7, 8 not used

PIN 8 PIN 1

PIN Assigned with

1,2,3 not used

4 DSL signal

5 DSL signal

6,7,8 not used

PIN 8 PIN 1

PIN 1 PIN 2

Connection

3. USB / LED connecting socket 6-pole on modem PCB for external DSL signalling

PIN Assigned with

1Cathode

2+ 3.3 V (Anode + RV)

30 V (USB)

4D+ (USB)

5D- (USB)

6VBUS (USB)

4. Connecting socket for internal power supply 3-pole on modem and power

supply PCB (at versions alpha DSL WTM PC AD and alpha DSL WTM PC BD or

alpha DSL WTM LP AD and alpha DSL WTM LP BD for the connection of modem and

power supply PCB; at versions alpha DSL WTM LP A and alpha DSL WTM LP B for the

connection to the external power supply)

PIN Assigned with Comment

10 Volt Ground

2+ 3.3 Volt Supply voltage

3+ 12 Volt Signalisation input power

Maximal current of supply voltage 3,3 V at PIN 2 is 2 A.

PIN 3 is the signalisation input power. If the voltage at PIN 3 is drop down under 10 V, then

the modem send „Dying Gasp“ to the DSLAM. The supply voltage 3,3 V at PIN 2 has to be

hold higher than 3,3 V over a period of 60 ms if the voltage at PIN 3 sinks under 10 V.

5. Connecting socket for external power supply 2-pole on power supply PCB

PIN Assigned with

10 Volt

2+ 12 Volt

At the versions alpha DSL WTM PC AD and alpha DSL WTM PC BD or

alpha DSL WTM PC A and alpha DSL WTM PC B, the voltage supply is realized

according to PC/104 specification over the PC/104 connectors.

JST S3B-XH-SM3-TB (LF)

PIN 1 PIN 3

JST SM06B-SRSS-TB (LF)

PIN 1 PIN 6

JST S2B-PH-SM4-TB (LF)

PIN 1 PIN 2

Putting into operation

Putting into operation and LEDs

Required software drivers

The communication between PC and DSL over the LAN connection is realized by means

of PPPoE (Protocol Point to Point over Ethernet).

The driver required for this has to be installed and activated on the PC to which the

DSL modem is connected.

Note:

The PPPoE driver for current Windows version can e. g. be downloaded on the

website www.raspppoe.com.

After correct cabling of the modem, the following status indications should be visible at the

top of the modem (see picture page 3, 4):

Status indication Meaning

Power Supply voltage available

DSL - blinking DSL training / dialogue between modem and

exchange / max. 10 min

DSL - glowing permanently DSL modem is registered, training / synchronisation

with exchange is terminated without data error

LAN / Ethernet LAN connection to the PC

Troubleshooting

Status indication One possible cause Measures

Power - not glowing The modem has no

power supply.

1. Check the correct sit of the DSL

modem in the PC/104 stack;

check the power supply of the

PC/104 module

2. The unit has to be exchanged

DSL - not blinking

40 s after correct

connection

DSL connection faulty Contact provider

DSL - blinking

longer than 10 min

Connection cable

defective or not inserted

correctly

1. Check the connection cable or the

patch cable between modem and

splitter

2. Check the connection cable at

splitter and modem / cable shall

snap safely into place

LAN - not glowing Connection cable

defective or not inserted

correctly

1. Check the connection cable or the

patch cable between modem and

PC / LAN terminal

2. Check the connection cable at

splitter and modem / cable shall

snap safely into place

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Modem popolari di altre marche

Davicom

Davicom DM562AP Manuale utente

EpiValley

EpiValley TATA indicom SXC-1080 Manuale utente

Zte

Zte WiMAX Manuale utente

Intelimax

Intelimax MA-2060 Manuale utente

SMC Networks

SMC Networks D3CM1604V Manuale per l'uso e la cura

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuale utente

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuale utente

Samsung

Samsung AceLink SAM-335A Manuale utente

Enfora

Enfora Enabler-G Guida rapida alla configurazione

iRZ

iRZ ATM2-232 Manuale utente

Zhone

Zhone 6310 Manuale utente

Paradyne

Paradyne Hotwire 7976 Manuale utente

US Robotics

US Robotics 3453C Manuale utente

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuale utente

Zte

Zte MF823 Manuale utente

Four-Faith

Four-Faith F1403 Manuale utente

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuale utente

Gemtek

Gemtek WiMAX WIXFBR-103 Manuale utente

FMN alpha DSL WTM PC Manuale utente

Manuali Modem popolari di altre marche