FONROCHE 6.1 Manuale utente
Page 2 of 18
How does it work ?
The battery gets loaded during daytime with the electricity produced by the
solar panel (PV).
Nighttime is detected by measuring the voltage of the solar panel :
- daytime
PV voltage > 30V
- nighttime
PV voltage = 0V
Avoid any shadow on the solar panel (trees, houses, traffic signs…). Shadows will
considerably impact electricity production of the panel and hence reduce
recharging of the battery.
Avoid artificial light on the solar panel during nighttime. This could
hinder
correct detection of sun fall by the panel and
can, worst case, completely
disable switching on of the light.
Page 3 of 18
Transport
Do not depalletise the solar panels before arriving at the
construction site. FONROCHE guarantee is voided if the modules are
handled before.
All mechanical parts are collected together on a separate pallet. Do
not disassemble the packages before arriving at construction site.
Reception
The delivery must be checked for completeness and possible transit
damage immediately at receipt:
- Control if the parts have not been harmed during transport,
otherwise please claim damage to the shipper within 48h after
receipt (and inform FONROCHE Lighting).
- Likewise, control the right fit bracket/pole, if any operating
problem is found, claim damage to FONROCHE Lighting.
Long-term storage
Power365 system:
Batteries must be stored within their original packing in a dry location.
The installation of batteries should happen
before the date indicated on the packing.
Contact FONROCHE Lighting in case you need to
store them longer.
Mechanical parts:
Mechanical parts must not be stored directly on the ground or near a storage
place of powdery products. The storage area should be sufficiently ventilated
to avoid any deterioration.
Poles strapping should be removed for storage periods longer than 3 weeks.
Maintenance - swap
The client is responsible for returning any defective part to FONROCHE
Lighting for expertise. After receipt of the defective parts, FONROCHE Lighting
will determine the guarantee validity. Depending on the result of the
expertise, the defective spare part may be charged to the client if the
guarantee period has expired or if the default is the result of an event out of
FONROCHE Lighting responsibility (bumps, falls, unadapted handling…).
Installation must comply with the installation manual;
all items provided must be installed otherwise the
guarantee is voided.
Page 4 of 18
FCC Regulatory notices
Modification statement
“Fonroche Lighting” has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s
authority to operate the equipment.
Interference statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Wireless notice
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The antenna should be installed and operated
with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC Class B digital device notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Page 5 of 18
N° screw
Thread
type
Tightening
torque
(Nm)
11 M6 > 10
10 M8 > 24
3, 8,
setscrews M10 > 47,7
M10 Setscrews 16
Part list
Page 6 of 18
Assemble the luminary on the
bracket
Set the luminary
9
10
Be careful setting the nuts on
the top side of the luminary
Use a draw wire (fish-tape) to draw the connector cable of
the lantern through the bracket to the top.
For all the setup, every
screw/nut system must be
tightened to the torque advocated by FONROCHE*
*See table on page 4
1
2
Page 7 of 18
Insert the cable into the tube.
18
Assemble the bracket on the
pole and orientation
Orient the luminary, fasten slightly each setscrew,
and then tighten them all.
Insert the tube into the bracket
20
X 8
4
3
Page 8 of 18
Assemble the base support
Set to 20° (unless otherwise stated).
3
4
4 5 6
18 17
16
5
IMPORTANT
Be so attentive to the lantern
cable inside the tube when
passing the screws N ° 3.
Page 9 of 18
4
5
6
4
8
14
Assemble the support for PV modules
Be careful to set the screws n°8
in the same way as illustrated in
the scheme to avoid any
problem when installing the
battery.
6
Page 10 of 18
Install the first PV binding, on
the ground Erect the street light
15
6
4
8
4 & 5
7
Install only one PV binding n°15 before erecting the
pole
Once the street light erected, go to step 9.
8
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali FONROCHE Luce esterna
Manuali Luce esterna popolari di altre marche
Lindby
Lindby 9949029 Manuale utente
HEPER
HEPER DOGO Side LW6048.585-US Istruzioni per l'installazione e il funzionamento
HEPER
HEPER LW8034.003-US Istruzioni per l'installazione e il funzionamento
Maretti
Maretti VIBE S 14.6080.04.A Manuale utente
BEGA
BEGA 84 253 Manuale
HEPER
HEPER MINIMO Istruzioni per l'installazione e il funzionamento
LIGMAN
LIGMAN BAMBOO 3 Manuale utente
Maretti
Maretti TUBE CUBE WALL 14.4998.04 Manuale utente
Maxim Lighting
Maxim Lighting Carriage House VX 40428WGOB Manuale utente
urban ambiance
urban ambiance UQL1273 Manuale utente
TotalPond
TotalPond 52238 Manuale utente
Donner & Blitzen
Donner & Blitzen 0-02661479-2 Manuale utente