Fortinet FortiDB 1000D Manuale utente
Database security & compliance
FortiDB™1000D
QuickStart Guide
Table of contents
Package contents ........................................1
Installing SFP transceivers ..................................2
Connecting to FortiDB .....................................4
Shutting down ...........................................6
Registering your product ...................................7
Ports & LEDs............................................8
Environmental specifications ...............................11
Safety ................................................12
Regulatory compliance ...................................14
License agreement & warranty..............................15
1
2 Power Cables Console Cable Ethernet Cable
2 Mounting Flanges
Rubber Feet
Mounting
Screws
Tools and Documentation
Tools and
Documentation
CD
QuickStart Guide
DATABASE SECURITY & COMPLIANCE
FortiDB™1000D
QuickStart Guide
Grounding
Screws
Package contents
The box should contain:
FortiDB 1000D appliance
FortiDB 1000D QuickStart Guide
Tools and Documentation CD
2 Power cables
Straight-through Ethernet cable
SFP dust plugs (already inserted)
Console cable
4 Rubber feet for desktop placement
2 Flanges for rack mounting
12 Screws for rack mounting
2 Screws for grounding
2
Installing SFP transceivers
If not already installed, install the SFP transceivers that will be used to
connect your appliance to the network.
Caution: Do not install or remove SFP transceivers while fiber optic cables
are attached. This can damage the cables, cable connectors, and optical
interfaces. It may also prevent the transceiver from latching correctly into
the socket.
Note: Installing and removing SFP transceivers can shorten their life. Do
not install or remove transceivers more than is necessary.
Extraction Lever
Transmit
Optical Bore
Receive
Optical Bore Socket Latch
SFP Cage Sockets
To install SFP transceivers
1. On the appliance’s front panel, remove the caps from SFP cage sockets.
2. Position the SFP transceiver in front of the cage socket so that the
extraction lever is level with the socket latch.
Note: SFP cage socket orientation may vary. Verify that the SFP
transceiver module is correctly oriented.
3. Holding the sides of the SFP transceiver, gently slide it into the cage
socket.
Caution: Do not force SFP transceivers into cage slots. Force can cause
damage. If the transceiver does not easily slide in and click into place,
it may not be aligned correctly or may be upside down. If this happens,
remove the SFP transceiver, realign or rotate it, and try again.
3
4. Press the transceiver firmly into the cage socket with your thumb until it
clicks, indicating that it is latched.
5. Verify that the transceiver is latched: grasp the sides and trying to pull it
out without lowering the extraction lever.
If you can remove the transceiver, it was not latched correctly, and could
become accidentally dislodged. Try again.
To remove SFP transceivers
1. Disconnect the fiber optic cable from the transceiver connector.
2. To prevent dust from entering the optical bores, insert clean plugs.
3. To eject the transceiver, pull the extraction lever out and down.
Tip: Instead of using your finger, try a small flat-head screwdriver.
4. Hold the sides of the transceiver and carefully pull it from the cage socket.
5. Replace the cap on the SFP cage socket.
6. Put the removed SFP transceiver into an anti-static bag.
4
Connecting to FortiDB
Either place the FortiDB appliance on a flat surface, or mount it in any
standard 19 inch (48.3cm) rack with the rack-mount brackets. In a rack,
a FortiDB 1000D occupies 2U (3.5inches/8.9 cm). If the appliance has
a redundant power supply, each power cable should be connected to a
different power source.
You can configure FortiDB for your network through a connection to
eitherits web UI or command line interface (CLI).
Connect FortiDB only to your computer until you finish setup. (If you place
FortiDB in your network before FortiDB is set up, device IPs could conflict.)
Deployment instructions are in the FortiDB Handbook.
FortiDB1000D
USB 1 2 3 4 5 6 7 8
HDD
STA
PWR
CONSOLE
Switch
Application
Server
Administrator
Firewall
Internet
FortiDB
Database
SPAN mirrors
database traffic
to FortiDB
To administrator,
database,
Internet
LAN
WAN
5
To connect to the web UI
Requires: Microsoft Internet Explorer 8, Mozilla Firefox 20, Apple Safari 6,
or Google Chrome 20 or newer
1. Using the Ethernet cable, connect port1 of the appliance to your computer.
2. Configure your computer to match the appliance’s default port1 subnet.
For example, on Windows 7, click the Start (Windows logo) menu to
open it, then click Control Panel. Click Network and Sharing Center,
Local Area Connection, and then the Properties button. Select
Internet Protocol Version 4 (TCP/IPv4) then click its Properties button.
Select Use the following IP address, then change your computer’s
settings to:
• IP address: 192.168.1.2
• Subnet mask: 255.255.255.0
3. To connect to FortiDB’s web UI, start a web browser and go to
https://192.168.1.99 . (Remember to include the “s” in https://.)
4. Type admin in the User Name field, type fortidb1!$ in the Password
field blank, then click Login.
To connect to the CLI via serial console
Requires: Terminal emulator such as PuTTY, TeraTerm, or a terminal server
1. Using the console cable, connect the appliance’s console port to your
terminal server or computer.
2. On your computer or terminal server, start the terminal emulator.
Usethesesettings:
• Baud rate: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None
3. Press Enter on your keyboard to connect to the CLI.
6
Shutting down
Always properly shut down the FortiDB
appliance’s operating system before turning off
the power switch or unplugging the appliance.
This causes it to finish writing buffered data, and
to slow and park the harddisks.
Do not unplug or switch off the FortiDB
appliance before halting the operating
system. Failure to shut down correctly could
cause dataloss and hardware problems.
To power off the appliance via the CLI
1. Connect to the CLI using a terminal emulator.
2. Enter the following command:
execute shutdown
You may be able to hear the appliance become more quiet when the
appliance stops its hardware and operating system, indicating that it is
ready for power to be disconnected.
3. Disconnect the power cable from the power supply.
7
Registering your product
Register
You must register the product with Fortinet
inorder to receive:
•Technical support •Software updates
•FortiGuardupdates
Enregistrer
Vous devez enregistrer le produit pour recevoir:
•Support technique •Mises-à-jour logiciel
•Mises-à-jourFortiGuard
Registra
La registrazione vi permette di usufruire di:
•Supporto tecnico •Aggiornamenti software •AggiornamentiFortiGuard
Registrar
Debe registrar el producto para recibir:
•Apoyo técnico •Actualizaciones de software
•ActualizacionesFortiGuard
登録のお願い
下記フォーティネットからのサービスを受けるために、ご購入製品の登録が必要
で す 。
• テクニカルサポート • ソフトウェアのアップデート • FortiGuardのアップデート
请马上注册
您的飞塔产品
您在注册以后才能得到技术支持, 软件升级, 及FortiGuard最新威胁防护
Web: https://support.fortinet.com/
Toll free: 1 866 648 4638
Phone: 1 408 486 7899
Fax: 1 408 235 7737
Email: [email protected]
8
Ports & LEDs
FortiDB 1000D
USB 1 2 3 4 5 6 7 8
HDD
STA
PWR
CONSOLE
14 65 72 3
# Interface Type Protocol Description
1 Hard Drives SATA Two 2TB hot swappable hard drives.
2additional hard drive slots.
2 Console RJ-45 RS-232
serial
Connection to the management computer.
9600 bps access to the CLI.
3 USB USB-A USB 2.0 Reserved for future use.
4 Power
(Redundant)
100 - 240 V 750W AC
50 - 60 Hz
4 - 2 A
5 Earthing
Terminals
Connect to ground using minimum #14
AWG green-with-yellow conductor.
6 Ethernet Ports
1 - 6
RJ-45 Gigabit
Ethernet
Connections to your network & the Internet.
Port1 default: https://192.168.1.99
7 Ethernet Ports
7 & 8
SFP Gigabit
Ethernet
Connections to your network & the Internet.
SerDes small form-factor pluggable (SFP)
transceiver.
Indice
Altri manuali Fortinet Firewall
Fortinet
Fortinet FortiMail-100 Manuale utente
Fortinet
Fortinet FortiGate FortiGate-1000 Manuale utente
Fortinet
Fortinet FortiGate FortiGate-3810A Manuale utente
Fortinet
Fortinet FortiGate-3016B Manuale utente
Fortinet
Fortinet FortiGate-100 Manuale di istruzioni
Fortinet
Fortinet FortiManager-100 Manuale utente
Fortinet
Fortinet FortiGate FortiGate-400 Manuale di istruzioni
Fortinet
Fortinet FortiGate 3600A Manuale utente
Fortinet
Fortinet FortiGate FortiGate-800F Manuale utente
Fortinet
Fortinet FortiGate FortiGate-800 Manuale utente
Fortinet
Fortinet FortiGate 60C-SFP Manuale utente
Fortinet
Fortinet FortiAnalyzer-100A Manuale utente
Fortinet
Fortinet FortiGate FortiGate-5020 Manuale utente
Fortinet
Fortinet FortiGate FMC-C20 Manuale utente
Fortinet
Fortinet FortiGate-50A Manuale utente
Fortinet
Fortinet FortiGate 3016B Manuale utente
Fortinet
Fortinet FortiGate FortiGate-5002FB2 Manuale utente
Fortinet
Fortinet FortiMail-4000A Manuale utente
Fortinet
Fortinet FortiGate FortiGate-100A Manuale utente
Fortinet
Fortinet FortiGate-200 Manuale utente
