Fortinet FortiSIEM 2000G Manuale utente

2000G Hardware Configuration

Guide

FortiSIEM 6.6.2

FORTINET DOCUMENT LIBRARY

https://docs.fortinet.com

FORTINET VIDEO GUIDE

https://video.fortinet.com

FORTINET BLOG

https://blog.fortinet.com

CUSTOMER SERVICE & SUPPORT

https://support.fortinet.com

FORTINET TRAINING & CERTIFICATION PROGRAM

https://www.fortinet.com/training-certification

NSE INSTITUTE

https://training.fortinet.com

FORTIGUARD CENTER

https://www.fortiguard.com

END USER LICENSE AGREEMENT

https://www.fortinet.com/doc/legal/EULA.pdf

FEEDBACK

Email: techdoc@fortinet.com

09/19/2022

FortiSIEM 6.6.2 2000G Hardware Configuration Guide

TABLEOFCONTENTS

Change Log 4

Appliance Setup 5

All-in-one Installation 5

Step 1: Rack Mount the FSM-2000G Appliance 5

Step 2: Power On the FSM-2000G Appliance 6

Step 3: Verify System Information 6

Step 4: Configure FortiSIEM via GUI 6

Step 5: Generate FortiSIEM FSM-2000G License Key File from FortiCare 13

Step 6: Register FortiSIEM License 13

Step 7: Accessing FortiSIEM UI 14

Step 8: Choose an Event Database 14

Cluster Installation 14

Installing the Supervisor 14

Installing Workers 16

Registering Workers 16

Installing Collectors 17

Installing Manager 18

Registering Instances to Manager 18

Registering Collectors 20

Factory Reset 24

Step 1: Uninstall FortiSIEM Application 24

Step 2: Reinstall FortiSIEM Application 24

FortiSIEM 6.6.2 2000G Hardware Configuration Guide 3

Fortinet Inc.

Change Log

Date Description

10/11/2021 Initial release of this guide.

FortiSIEM 6.6.2 2000G Hardware Configuration Guide 4

Fortinet Inc.

Appliance Setup

Follow the steps below to setup FSM-2000G appliance.

lAll-in-one Installation

lCluster Installation

All-in-one Installation

Follow these steps to install all of the FortiSIEMcomponents at one time.

lStep 1: Rack Mount the FSM-2000G Appliance

lStep 2: Power On the FSM-2000G Appliance

lStep 3: Verify System Information

lStep 4: Configure FortiSIEM via GUI

lStep 5: Generate the FortiSIEM FSM-2000G License Key File

lStep 6: Register the FortiSIEM License

lStep 7: Accessing FortiSIEM UI

lStep 8: Choose an Event Database

Step 1: Rack Mount the FSM-2000G Appliance

1. Follow FortiSIEM 2000G QuickStart Guide located here to mount FSM-2000G into the rack.

2. Insert solid state drive disks (SDD) and hard drive disks (HDD)into the positions as shown below:

Connect FSM-2000G to the network by connecting an Ethernet cable to Port 0.

Before proceeding to the next step, connecting Ethernet cable to Port 0 is required for

Network configuration.

FortiSIEM 6.6.2 2000G Hardware Configuration Guide 5

Fortinet Inc.

Appliance Setup

Step 2: Power On the FSM-2000G Appliance

1. Make sure the FSM-2000G device is connected to a Power outlet and an Ethernet cable is connected to Port 0.

2. Power On the FSM-2000G device.

FSM-2000G appliance does not have a default IP address. To connect to the GUI, an IP

address must be configured using the GUI (Step 4).

Step 3: Verify System Information

1. Connect to the FSM-2000G appliance using VGA port or Console port.

2. Login as ‘root’ user with password ProspectHills. You will be required to change the password. Remember this

password for future use. Once you change the password, you will be logged out. Login again with your new

password.

3. Run get to check the available FortiSIEM commands.

4. Use these commands to check the hardware information. After running each command, ensure that there are no

errors in the displayed output.

Command Description

get system status Displays system name, version and serial number.

diagnose hardware info Displays system hardware information like CPUs, Memory and

RAID information.

diagnose interface detail

port0

Displays interface status (see the following table).

The following table describes the port number mapping between the 2000G physical port number label and the

FortiSIEM 6.6.2 interface port numbering.

2000G Physical Port

Number Label

FSM 6.6.2 Interface

Port Numbering

port1 port0

port2 port1

port3 port2

port4 port3

port5 port5

port6 port4

Step 4: Configure FortiSIEM via GUI

Follow these steps to configure FortiSIEM by using a simple GUI.

FortiSIEM 6.6.2 2000G Hardware Configuration Guide 6

Fortinet Inc.

Appliance Setup

1. Log in as user root with the password you set in Step 3 above.

2. At the command prompt, go to /usr/local/bin and enter configFSM.sh, for example:

# configFSM.sh

3. In VM console, select 1 Set Timezone and then press Next.

4. Select your Region, and press Next.

5. Select your Country, and press Next.

6. Select the Country and City for your timezone, and press Next.

7. If installing a Supervisor, select 1 Supervisor, and press Next.

If installing a Worker, select 2 Worker, and press Next.

If installing a Collector, select 3 Collector, and press Next.

If Installing FortiSIEMManager, select 4 FortiSIEMManager, and press Next.

FortiSIEM 6.6.2 2000G Hardware Configuration Guide 7

Fortinet Inc.

Appliance Setup

Regardless of whether you select FortiSIEMManager,Supervisor,Worker, or

Collector, you will see the same series of screens with only the header changed to reflect

your target installation, unless noted otherwise.

8. If you want to enable FIPS, then choose 2. Otherwise, choose 1. You have the option of enabling FIPS (option 3) or

disabling FIPS (option 4) later.

Note: After Installation, a 5th option to change your network configuration (5 change_network_config) is

available. This allows you to change your network settings and/or host name.

FortiSIEM 6.6.2 2000G Hardware Configuration Guide 8

Fortinet Inc.

Appliance Setup

9. Determine whether your network supports IPv4-only, IPv6-only, or both IPv4 and IPv6 (Dual Stack). Choose 1for

IPv4-only, choose 2for IPv6-only, or choose 3for both IPv4 and IPv6.

10. If you choose 1(IPv4) or choose 3(Both IPv4 and IPv6), and press Next, then you will move to step 11. If you

choose 2(IPv6), and press Next, then skip to step 12.

11. Configure the network by entering the following fields. Note the IP Address--you will need it in a later step. Press

Next.

Option Description

IPv4 Address The Manager/Supervisor/Worker/Collector's IPv4

address

NetMask The Manager/Supervisor/Worker/Collector's

subnet

Gateway Network gateway address

DNS1, DNS2 Addresses of the DNS servers

12. If you chose 1in step 9, then you will need to skip to step 13. If you chose 2or 3in step 9, then you will configure

the IPv6 network by entering the following fields, then press Next.

FortiSIEM 6.6.2 2000G Hardware Configuration Guide 9

Fortinet Inc.

Appliance Setup

Option Description

IPv6 Address The Manager/Supervisor/Worker/Collector's IPv6

address

prefix

(Netmask)

The Manager/Supervisor/Worker/Collector's IPv6

prefix

Gateway ipv6 IPv6 Network gateway address

DNS1 IPv6,

DNS2 IPv6

Addresses of the IPv6 DNS server 1 and DNS

server2

Note: If you chose option 3in step 9 for both IPv4 and IPv6, then even if you configure 2 DNS servers for IPv4 and

IPv6, the system will only use the first DNS server from IPv4 and the first DNS server from the IPv6 configuration.

Note: In many dual stack networks, IPv4 DNS server(s) can resolve names to both IPv4 and IPv6. In such

environments, if you do not have an IPv6 DNS server, then you can use public IPv6 DNS servers or use IPv4-

mapped IPv6 address.

13. Configure Hostname for FortiSIEMManager/Supervisor/Worker/Collector. Press Next.

Note: FQDN is no longer needed.

FortiSIEM 6.6.2 2000G Hardware Configuration Guide 10

Fortinet Inc.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fortinet Hardware di rete

Fortinet

Fortinet FortiAnalyzer 400C Manuale utente

Fortinet

Fortinet FortiMonitor 100F Manuale utente

Fortinet

Fortinet FortiGate 3000F Series Manuale utente

Fortinet

Fortinet FortiGate-5000 Manuale utente

Fortinet

Fortinet FortiLog-400 Manuale utente

Fortinet

Fortinet FortiGate 100F Series Manuale utente

Fortinet

Fortinet FortiBridge-2001F Manuale utente

Fortinet

Fortinet FortiMail-100 Manuale utente

Fortinet

Fortinet FortiAP 231FL Manuale utente

Fortinet

Fortinet FortiSwitch 224E Series Manuale utente

Fortinet

Fortinet FortiGate 4800F Series Manuale utente

Fortinet

Fortinet FortiAnalyzer 800G Manuale utente

Fortinet

Fortinet FortiAP 431F Manuale utente

Fortinet

Fortinet FortiGate 400F Series Manuale utente

Fortinet

Fortinet FortiOS 3.0 Manuale di istruzioni

Fortinet

Fortinet FortiGate ASM-CE4 Manuale utente

Fortinet

Fortinet FortiAnalyzer 200D Manuale utente

Fortinet

Fortinet FortiLog-100 Manuale utente

Fortinet

Fortinet FortiNAC-CA-500F Manuale utente

Fortinet

Fortinet FortiGate 3700F Series Manuale utente

Fortinet

Fortinet FortiSwitch M426E-FPOE Manuale utente

Fortinet

Fortinet FortiAnalyzer 3700G Manuale utente

Fortinet

Fortinet FortiGate 80F Series Manuale utente

Fortinet

Fortinet FortiToken 200CD Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente