Forza BOSS Manuale utente
FORZA BOSS
OUTBOARD MOTOR
Table of Contents
1. Safety Information..………………………………………………......1
2. Product Features and Operation…................…………………………2
3. Technical Features and Specifications...…….………………………..
4. Overall Dimensions…………………..……………………………….8
5. Installation.........…………………....….……………………………...8
. Usage and Operational Warnings.…….………………………………8
7. Troubleshooting...........................……………………………………18
8. Safety precautions and accident handling……………………………20
9. Maintenance …………………………………………………………21
10. Delivery/Storage..…………………………………………………...22
2
1. Safety Information
This outboard motor‘s engine is made of a single cylinder, four stroke, vertical shaft.
The machine has an advanced design, compact structure, light weight, reliable
performance, portable operating and maintenance. It is widely used in river, lake and
transport service.
●Before operating this outboard motor, please read entire manual and all warning
labels.
●Read all the manuals supplied by the boat manufacturer.
●Read all the labels both of outboard motor and boat. If these labels are broken,
illegible or get lost, please contact your dealer for a replacement.
●According to the danger level, the safety warning title in this manual uses the
following methods and warning marks.
Dangerous!
It means taking attention to high risk.
Warning!
It means taking attention to poor risk.
Attention!
It means taking attention to mild risk.
1
2. Product Features and Operation
overall structure and main spare parts.①
1.Gasoline engine 2. Shifting
handle 3.Clamp bracket
4.Transmission shaft box
5.Gearbox . Propeller 7. Handle
8.Choke valve handle
9. Engine stop button
10. Operating handle
11. Starter handle
Figure 1 main spare parts
Operating handle assembly⑴
If you want to change the direction, you need to move the operating handle to
make it turn based on your intended direction. See Figure 1
Throttle handle⑵
Throttle handle is located on the end of operating handle assembly. Turn
counterclockwise to speed up, and clockwise rotation will slow down, see Figure
2 Figure 2
2
Engine stop button⑶
If you want to stop the motor, please disconnect cable clamp. When you connect
the cable clamp, it can be restarted. See Figure 3.
Figure 3
Attention!
Boss outboard motor will not work when you remove the clamp.
Choke valve handle⑷
Before starting, you need to add fresh clean fuel. Then, you need to push the
choke valve handle to “Start”. Once started, you should push the choke valve handle
to “Operate” quickly. See Figure 4.
Figure 4
3
(5)Starting handle
If you want to start the engine, first pull the handle gently until you feel resistance.
Then you may pull the handle quickly to start the engine. see Figure3.1.
( )Shifting handle
Move the handle down to the low position, Figure 5 , the outboard motor goes
forward, the propeller begins rotating and the boats goes Forward
Move the handle up to the high position,Figure 5, the outboard motor goes back,
and the propeller inverts, the boat goes in Reverse.
Move the handle to the middle,Figure 5, the outboard motor idles, and the
propeller stops, the boat loses driving force(Neutral).
Attention!
1. To ensure safety and easy starting, you need to start the engine on the null.
2. If you want to shift, motor must be at a stable idle and not at high speed.
Figure 5
(7)Handle
There are steel pipe handles on the head of cylinder on the Boss outboard motor.
You can use your hands to carry easily. See Figure .
4
Figure
.Boss Outboard motor operating procedure②
See Figure 1, after starting the engine, transmission shaft turns with crankshaft by
the spline in the crankshaft. Turning the transmission shaft to Drive, the active
bevel gear turns, meshing with the passive bevel gear on the output shaft. There are
two passive bevel gears on the output shaft which can be paired with the active
bevel gear on the shaft. It can make the output shaft turn with different passive
bevel gears or don’t turn with them determined by shift handle position.
3 Boss outboard motor electrical schematic diagram.
Figure 7
5
3. Technical Features and Specifications
Model 1P70
Gasoline
Engine
Technology
parameter
Performance index Specifications
stroke Cylinder, air-cooling, four stroke
Cylinder bore*stroke(mm) 70*45
Displacement(cm³) 173
Ma output power/rotate speed (kw/r/min) 4.4/3 00
Max torque/rotate speed N.m/r/min 8/3000
Highest stable rotate speed( r/min) 3500±100
Lowest no-load stable rotate speed (r/min) 1700±50
Lowest fuel consumption g/kw.h 420
Normal temperature start performance(s) ≤30
Heat engine start performance(s) ≤30
Spark model F RTC
Spark gap 0.7~0.8
Ignition system TCI
Start system Recoil start
Start with strong way Choke valve
Valve gap(cold)(mm) Intake/exhaust0.05~0.1
Wet weight 14KG
Size(mm) 430*380*410
Model Forza Boss Outboard Motor
Performance index Specification
Standard power&speed kw/r/min 3.75/2000
Gasoline
Engine
Technology
parameter
full throttle rotate speed r/min 2400±100
Size(mm) 480*400*1180
Weight(kg) 28.5kg
Hook height(mm) 47.5
Applicative tail- board vertical
height(mm)
503-530
Operating method Steering handle
Transmission method Gear
Gear ratio 1:1.5(1 /24)
Cooling method Forced cooling
Exhaust silence way Muffler keep in straight
Lifted method Manual
Propeller size 3-7 1/2’*5
Fuel 90# unleaded gas
Fuel tank capacity 1.2L
Engine oil 4 stroke engine oil SAE15-40
Lubricating system Splash lubrication
Max fuel consumption kg/h 1.25
Engine lubricant 0. L
Gear oil type Hypoid gear oil SAE#90
Gear oil 0.1L
grease General purpose lithium lubricating
grease(GB7324-1994)
7
4. Overall Dimensions
Figure 8
5. Installation
(1)Choose matched outboard motor and boat
Before using the outboard motor, you should make sure that the power of the
outboard motor is compatible with the boat and the engines, it is usually subject to
when it’s fully loaded, the outboard motor runs full throttle and the maximum
speed range that the engine reaches.
8
Indice
Altri manuali Forza Motore fuoribordo
