FOSSIBOT F800 Manuale utente
F800 Power Station
User Manual
Thank you very much for purchasing the 800W portable power station. Be sure to read this manual
carefully before using the product in order to use it correctly. This manual is needed for after-sales
service. Please keep this manual together with the invoice and other purchase certificates.
In order to ensure the safety of this product during transportation, it is only charged to about 30%
when it is packaged. Please recharge when you get the product/Please recharge the product as soon
as you receive it. The product can be charged directly by the wall socket, please do not use
extension cords and cable taps.
When charging the product, do not plug other products in the same socket.
Warning
1. Please avoid using the product near high temperature, high humidity, direct sun environment and
fire place.
2. Do not disassemble or modify this product, it will cause malfunction and fire.
3. Please discard or recycle the product according to the methods prescribed by local laws.
4. Be careful not to drop the product from a high place and give the product a strong impact.
5. Keep or use the product in a place out of the reach of children.
6. Please use our company's genuine accessories. The damage caused by the use of non-genuine
accessories cannot be repaired free of charge.
7. Please leave a space of about 30cm away from the side suction and exhaust ports, so as not to
affect the heat dissipation of the product.
8. When not using this product, please turn off the power and unplug the power cord. Please avoid
storing the product in a place exposed to direct sunlight with high temperature and humidity.
9. For long-term storage, please consume power from full power to no power once every 3 months,
and then recharge to about 50%.
10. Please do not use this product and its accessory cables and connecting equipment when there is
a defect.
11. Please do not store the product for a long time in extremely high and low temperature places
such as in the car and in the field warehouse to avoid shortening the battery life.
12. Always operate or store the unit within the specified temperature range.
13. DO NOT place the unit on an unstable or tilted surface.
14. Make sure the area where you are using the unit is well-ventilated and spacious.
15. DO NOT ignore those warning signs on components or products made by manufacturers.
16. DO NOT insert foreign objects into the fan, vents, ports, or other openings.
17. DO NOT dismantle, cut, crush, puncture, or otherwise damage the unit in any way.
18. DO NOT insert foreign objects into the fan, vents, ports, or other openings.
19. NEVER use a damaged battery or component. Improper use or misuse of damaged batteries
may cause damage to your device or injury to yourself as a result of battery fluid leakage, fire,
overheating, or explosion.
20. Turn off the unit IMMEDIATELY in case of malfunction.
21. Use dry powder fire extinguisher in case of fire.
22. Keep the unit in a dry and cool place.
23. DO NOT place the unit on its side or upside down.
24. DO NOT stack anything on top of the unit, either in storage or in use.
25. Recommended storage temperature: 32-104°F/0-45°C.
26. FOSSiBOT Power Stations are NOT permitted to be carried on board as checked or carry-on
baggage.
Content
Packing List...................................................................................................1
Product Introduction..................................................................................... 1
Introduction of Button Function................................................................... 2
Display Icon Introduce..................................................................................5
Charge & Discharge Simultaneously........................................................... 6
Solar Panel Connection.................................................................................7
Car Charging................................................................................................. 8
Product Specification....................................................................................9
Battery Specification.....................................................................................9
Troubleshooting Table................................................................................10
Warranty Card.............................................................................................11
1
Packing List
Power Station
AC Charger
User Manual
MC4 to XT60
Plug Charging Cable
Product Introduction
This product is a 512Wh large-capacity 800W high-power portable power station
supplied with 1.5 hours of high-speed charging, using a LiFePO4 battery with high
safety performance.
It can be used as a backup power supply in case of emergency power cut or a disaster,
as well as for camping and vehicles, and can provide power for various power tools
in any situation.
800W high power, pure sine wave AC output, can be used for household appliances
such as dryers, microwave ovens, refrigerators, induction cookers; it can also be used
for other electronic devices such as personal computers.
Through the 400W ultra-fast charging, this model can be fully charged within 1.5
hours. The AC input/output voltage frequency can be automatically or manually
switched between 50Hz/60Hz.
This product also supports a maximum 200W solar charge, allowing you to charge it
even when the power is cut or in outdoor situations.
2
Introduction of Button Function
1Main power control
2LED Light control
3USB control
4DC control
5LCD display
6Air intake/outlet
7AC on/off control (50Hz/60Hz
switching control)
8XT60 input port(for solar panel)
9AC input port
①Main Power Control
Main Control for the whole system turn on/off.
Operate method: long press the button for 3s to turn on/off the system.
②LED light control
Operate method: short press to turn on and change the light mode (SOS/Flash).
Notice: you can turn off the light by long press the button(1-2s) in any mode.
③USB button
Operate method: short press to turn on/off.
USB-A×2
TYPE-C×1
TYPE-C×2
QC 3.0
PD-100W
PD-20W
3
④DC button
Operate method: short press to turn on/off.
DC6530 Output×1
Cigar Lighter×1
12V/10A
12V/10A
⑤LCD display
Present the remaining power and using data.
⑥Cooling system
When the fans are working, please don' t block the channel.
⑦AC button (AC output, total share 800W)
Operate method: short press to turn on/off.
Notice: 1. Please confirm the output voltage or frequency before using
2. Long press the button for 3s to enter the frequency changing mode, 50Hz and 60Hz will
blink in the display, press again the button to chose the right frequency, wait till the
frequency is not blinking, then you will get the frequency you want.
3. Quick short press for 10 times to switch the voltage.
⑧Solar panel input
Use the included XT60→MC4 conversion cable to connect the solar panel.
1. Solar panels can have a maximum input of 200W and a maximum voltage of 50V.
2. If exceeding the maximum voltage leads to equipment damage, it is beyond the scope of
warranty.
4
⑨AC Input
Use wall socket to get 400W fast charging, which can full charge from 0 to 100% in
1.5 hours.
※The product can be charged directly by the wall socket, please do not use extension cords and
cable taps. When the product is charging, do not plug other products in the same socket.
※Please do not plug several devices together in a extension socket at once, the current will be to
high and bring damage to the cable and fire risk.
※If the extension socket is plugged in to charge this product, please do not connect other
electrical appliances to this socket, otherwise the household meter may trip.
5
Display Icon Introduce
①Charging/using time
②Total input power
③Battery Progress Bar
④Power percentage
⑤Total output
power
⑥LED light
⑦AC output
⑧DC output
⑨Type-c output
⑩USB output
⑪Fan state
⑫Cigar lighter
output
⑬XT60 charging
⑭AC charging
⑮High/low temperature
protection
Display Attention
When this icon light up. Please keep Air intake/outlet unobstructed.
Please note that the device is now with high/low temperatures and may
cease functioning until the temperature returns to the normal standard.
When this icon is blinking, represent that the AC input is faulty, please
recheck (Power/Hz/cable).
When the icon is blinking, represent the output is fault,
please recheck.
6
Charge & Discharge Simultaneously
●UPS function
This product has a bypass mode, does not need to pass through the battery, can
directly output from the AC.
In UPS mode, when the AC input power of the mains is cut off due to a power outage,
the ac input power of the mains can be used in about automatic switch to product
battery power within 10 ms to ensure AC output.
●UPS Connections
As shown in the figure below, connect the product between the socket on the wall
and the electrical appliances, and the power of the product is in the ON state. When
you turn on the power of the electrical appliances, they will directly use the AC
power of the power grid.
In this state, when the power grid is cut off, it will automatically switch to the
product's internal battery to supply power.
※In UPS mode of the China, United Kingdom, Europe and South Korea, AC output of the
maximum power below 800W, AC output over 800W, " " AC output icon flashes indicating
overload.
※The charging and discharging at the same time function of the UPS can work properly only
when the F800 is connected with AC plug.
Indice
Lingue:
Altri manuali FOSSIBOT Alimentazione elettrica
