Fostex DV-824 Guida alla configurazione

Model DV824 Owner’s manual (V1.20 supplement)

Fostex is pleased to bring you DVD-R/RW and CD-R/

RW record and playback capability with version 1.20.

DV824Version 1.20 Operation Instruction

Beside DVD-RAM disks, DVD-R/RW and CD-R/RW media can now be used as a destination

disk for the file copy function. As the writing method is “At Once”, you cannot edit or add any

contents, once you finalized the DVD-R/RW and CD-R/RW.

Note:

DV824 cannot record audio data directly to DVD-R/RW or CD-R/RW.

The files have to be recorded on the HD first.They can then be copied to the disk as

follows.

Preparation

You need to set the HD partition as the current drive, which you want to copy the data from.

To set the HD as the master drive, press [SHIFT] then [FILE SEL] key to enter the Drive

Select menu and choose the HD partition.

Utility Menu“File Copy >”

By going to the Disk Utility Menu then File Copy, you will enter the first layer of File Copy

mode. Here, the source drive is already fixed with the above procedure. You can choose the

destination by the [MENU] dial and move on to the second layer by pressing the [ENTER/

YES] key.

1st Layer

Choose the files to be copied

In the second layer, you can choose what files are to be copied from the partition.

Mark the file name and press the [FILE SEL] key. This will be indicated with a tick at the front

of file name.

If you want to choose all the files in the partition, place the cursor to the “<All Select>” that is

listed at the end of menu and press the [FILE SEL] key. This will show ticks on all the files.

To de-select any of files chosen, press the [FILE SEL] key again upon highlighting the files

with the cursor.

When you press the [ENTER/YES] key, the display will move to the third layer.

If the target disk does not have enough space to have all the files copied, the display will

show the warning message as “Over copy size” and take you back to the second layer.

Blinking

File Copy

When File copy is in progress, the following display will appear.

3rd Layer

Cont.

After the copy process is finished, it will now show the following display and finalize the disk

in DVD-R/RW or CD-R/RW format.

Note:

1. DVD-R/RW requires at least 1GB data area, which is 70mm in diameter. If the total file

size to be copied is below 1GB, it will fill up with the lead out data. Thus, it takes a

longer time to finalizing the disk. If a file size is smaller than 650MB, using a CD-R/RW

disk might be a better option.

2. If the loaded DVD-RW or CD-RW disk is not blank, you can erase the prerecorded data

by the DV824 if you want.

Then, change to the following;

It will display as the following;

If you press [ENTER/YES] key, it will start erasing the DVD-RW or CD-RW disk.

Cont.

© Printed in Japan JULY 2005 8289621000 FX

(430455)

2nd Layer

Altri manuali per DV-824

7

Indice

Altri manuali Fostex Apparecchiature di registrazione

Manuali Apparecchiature di registrazione popolari di altre marche

KV2 Audio

KV2 Audio 500 Series Manuale utente

Robotics Technologies

Robotics Technologies microBus-Cam II Manuale utente

Seca

Seca 460 Manuale utente

Cognex

Cognex MVS-8000 Series Manuale utente

Mect

Mect MPNC006 Series Manuale utente

Bad Caf

Bad Caf THE LEASH Manuale utente

Strymon

Strymon NIGHTSKY Manuale utente

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuale utente

Tews Technologies

Tews Technologies TPMC465 Manuale utente

Honeywell

Honeywell Excel 50 Manuale utente

SeaLevel

SeaLevel COMM+8.LPCI Manuale utente

Arturia

Arturia AUDIOFUSE STUDIO Manuale utente

Rukra

Rukra RK-1240 Manuale utente

Samson

Samson SCOM Manuale utente

Dynacord

Dynacord DPS260 Manuale utente

Nice

Nice Core Manuale utente

Pyle Pro

Pyle Pro PSS8 Manuale utente

RF-System

RF-System TinyGate Manuale per l'uso e la cura