Frama F-LINK 2 Manuale utente
FRAMA Fx Series 7, 7.5 and 9
USER MANUAL F-LINK 2
Table of contents
LAN connectivity 2
LAN wireless connectivity 6
Appendix 10
2
LAN connection
LAN connectivity
The LAN connectivity works for the Frama Fx Series 7, 7.5 and 9.
Plug in the Power Adapter and wait until both status lights are
lit
On your Mobile Phone, look in wireless setting for
available networks. Search for a network that starts with:
Connect-A001245 Select this network and enter the
Password: Nconnect
Open an internet browser on this phone and enter the
following URL: https://192.168.123.1
You may see a warning that the connection is not private. Please
click on the Advanced-tab in your browser to proceed to
https://192.168.123.1
Now, you will be allowed to sign in. Use the following login:
Login: admin
Password: admin
LAN
LAN
Plug the LAN cable between the F-Link 2 and the customer
network
Conguration of Modem / Router mode for F-Link 2
Step 1:
Note: With your mobile phone, you must be connected with
the box to modify settings
On Home page: the LAN status should be UP and the IP
address should be different from 192.168.123.1
3
Success Information
Step 3:
On Settings / IS/IN/IX enter URL Settings of F-Link 2
Then, click the Apply button
Therewith the conguration of the F-Link 2 has been completed.
Step 2:
Go to NETWORK/LAN page
Next, set the following parameters:
Select Static (not DHCP)
Sample settings. Ask the Network administrator for correct IP
credentials:
IP address: 192.168.99.1
NetMask: 255.255.255.0
Gateway: 192.168.0.1
DNS 1: 8.8.8.8
DNS 2: 8.8.4.4
Then, click the Submit button
CH
On- Line Services: chfr-MeterServices.link0-neopost.com
Server Postal Core: chfr-MeterServices.link0-neopost.com
Port number: 443
UK
On- Line Services: ukfr-MeterServices.link0-neopost.com
Server Postal Core: ukfr-MeterServices.link0-neopost.com
Port number: 443
4
Conguration of Fx Series franking systems
Franking Systems Conguration
Plug in the LAN cable to the Internet wall socket
Step 1:
On the Franking Systems go to Supervisor Mode (Manger)
and then to Communication Setting
and congure following parameters
Next, select LAN settings
In LAN conguration select DHCP ON
Also select DNS AUTO ON
Conrm with OK
Plug in the LAN cable to the base and the Internet wall socket
Power up the F-Link 2
5
Next screens just conrm until you reach Proxy menu
Set Proxy to ON
Conrm setting with OK
In Proxy conguration enter the following credentials:
Ask the customer IT administrator for correct credentials
• Proxy-URL 192.168.99.1 (static IP address from the F-Link
2)
• Proxy-Port 8080
• If required: Proxy Domain name, User name and
Password
Conrm with OK
In Network conguration enter the following credentials:
• TCP output port: 4444
Activate URI redirection menu
• Redirection URI (OLS): ols
• Redirection URI (PSD): postal
Note: Next screens just conrm with OK until you reach
Communication settings again
Note: Write URI information in small letters
Conrm with OK
Congratulation! The F-Link 2 and the Franking Systems are successfully congured for Router mode.
However, make sure the F-Link 2 is fully functional by performing a Postal Inspection and an OLS Generic call on the franking systems.
Step 2:
In Superuser access (Manager) go to
• Menu System Info (DE)
• Menu Maintenance (EN)
Select
• Netzwerkeinstellungen (CH)
• Network Advanced Settings (UK)
6
Connect by Wireless
LAN Wireless connectivity
The LAN Wireless connectivity works for the Frama Fx Series 7, 7.5 and 9.
Plug in the Power Adapter and wait until the status lights are lit
On your Mobile Phone, look in wireless setting for
available networks. Search for a network that starts with:
Connect-A001245 Select this network and enter the
Password: Nconnect
Open an internet browser on this phone and enter the
following URL: https://192.168.123.1
You may see a warning that the connection is not private. Please
click on the Advanced-tab in your browser to proceed to
https://192.168.123.1
Now, you will be allowed to sign in. Use the following login:
Login: admin
Password: admin
Note: With your mobile phone, you must be connected with
the box to modify settings
Step 1:
In the navigation, select Network /LAN
Conguration of Wireless mode for F-Link 2
Next, set the following parameters:
Select Static (not DHCP)
Sample settings. Ask the Network administrator for correct IP
credentials:
IP address: 192.168.99.1
NetMask: 255.255.255.0
Gateway:
DNS 1: 8.8.8.8
DNS 2: 8.8.4.4
Then, click the Submit button
LAN
LAN
Wireless
LAN
LAN
TLS 1.2
7
The success information appears
Step 2:
On Settings / IS/IN/IX enter URL Settings of F-Link 2
Step 3:
In the navigation, select Wireless Station. You will see a list of
Wireless networks with their SSIDs displayed
Select the corresponding Wireless network and click Connect
The security description is to be understood as follows:
• Open: no password required
• Secured: password required
• Secured Enterprise: administrator required
Next, enter the password of your WLAN and click „Connect“
After that, you should receive a success information
Press OK
The F-Link 2 is now connected to WI-FI. Now, the conguration of the franking machine will take place.
Note: The WI-FI is activated if the green LED is lightnig
Then, click the Apply button
Note: From conguration LAN to WI-FI, check in Menu,
advanced Network Settings:
URI = OFF
Port = 443
CH
On- Line Services: chfr-MeterServices.link0-neopost.com
Server Postal Core: chfr-MeterServices.link0-neopost.com
Port number: 443
UK
On- Line Services: ukfr-MeterServices.link0-neopost.com
Server Postal Core: ukfr-MeterServices.link0-neopost.com
Port number: 443
8
Conguration of Fs Series 3 franking systems
LAN
LAN
Wireless
LAN
LAN
TLS 1.2
Plug the LAN cable between the F-Link 2 and the franking
systems
Power up the F-Link 2 if it‘s not already powered up
Franking Systems Conguration
On the Franking Systems go to Supervisor Mode (Manger)
and then to Communication Setting
and congure following parameters
Next, select LAN settings
9
Following images showing sample IP setting. Ask your network
administrator for correct credentials.
Note: with button C clear rst all information being able to
enter the IP address
• Machine IP address: 192.168.99.3
• Subnet Mask: 255.255.255.0
• Default Gateway: 192.168.99.1 (IP address of the
F-Link 2)
Conrm with OK
Enter 8.8.8.8 for the preferred DNS IP address
Enter 8.8.4.4 for the alternate DNS IP address
Press OK
Select Proxy off and conrm with OK
The F-Link 2 is successfully setup once you see both green
lights on
Congratulation! The F-Link 2 and the Franking Systems are successfully congured.
However, make sure the F-Link 2 is fully functional by performing a Postal Inspection and an OLS Generic call on the franking machine.
In Menu DHCP conguration select DHCP OFF to enter the x
IP
10
Appendix
To switch off Wi-Fi mode
To Reset F-Link 2 to Factory Default
To disable the current Wi-Fi mode go to Wireless Station, press Connect and enter an incorrect Password. Wait until the message
„Impossible to connect to ssid“: appears.
The green Wi-Fi Led turns to yellow. The chosen Wi-Fi station is disabled.
Step 1:
Connect a USB key (drive) to a PC. Make sure the key is formatted for FAT32.
Step 2:
Create a text le on the root directory of the key and name it ‘ifreset’ then save.
Click on the new le and change the extension from ‘.txt’ to ‘.cmd’.
Remove the key from the PC.
Step 3:
Power off the F-Link 2 and insert the USB key into the USB port.
Switch On the F-Link 2.
Wait until the Wireless LED turns amber and the box has been reset.
Questo manuale è adatto per i seguenti modelli
1
Indice
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
