FRANCO UCP Fly Mobile Manuale di istruzioni

INSTRUCTION MANUAL FOR

USE AND MAINTENANCE

UCP Fly Mobile

HUMIDIFIER/COOLER

TRANSLATION OF ORIGINAL INSTRUCTIONS

ENGLISH

Read this manual carefully before

installing and operating the machine

Rev. 00/2022 Franco s. r. l. - Via Nazionale, 80 - 12010 Cervasca (CN)

 
 
Operation and Maintenance Manual - UCP Fly Mobile 
 
 

INDEX 
 
INDEX.......................................................................................................................................2 
- INTRODUCTION .................................................................................................................3 
1 General Safety Warnings .......................................................................................................3 
2 Guidelines for the correct disposal of the product ..................................................................3 
3 Conventions used in this manual............................................................................................3 
4 Keeping and updating the instruction manual.........................................................................4 
5 Addressees ............................................................................................................................4 
6 Pictograms .............................................................................................................................5 
7 Applications............................................................................................................................7 
8 Versions .................................................................................................................................7 
9 Machine identification and nameplate data ............................................................................7 
10 Description of the device......................................................................................................8 
11 Transport and handling.........................................................................................................9 
12 Warranty...............................................................................................................................9 
13 Manufacturer's identification data.........................................................................................9 
14 Declarations .........................................................................................................................9 
15 EC Declaration of Conformity.............................................................................................10
- INSTALLATION ................................................................................................................11 
1 Preliminary Operations.........................................................................................................11
2 Positioning............................................................................................................................11
3 Electrical Connections..........................................................................................................12
4 Water supply ........................................................................................................................12
- OPERATION .....................................................................................................................12 
1 Preliminary Operations.........................................................................................................12
2 First Start-up.........................................................................................................................12
3 Start-up and Operation.........................................................................................................13 
4 Adjusting the water flow rate ................................................................................................13
5 Stopping...............................................................................................................................13
- MAINTENANCE ................................................................................................................14
1 Disk Cleaning.......................................................................................................................14 
2 Cleaning the Tank and Reservoir.........................................................................................14 
3 Replacing and cleaning the pump ........................................................................................14
4 Replacing the rotating disc...................................................................................................15 
6 Nozzle Replacement ............................................................................................................16
7 Accessories..........................................................................................................................16 
- TECHNICAL CHARACTERISTICS...................................................................................17 
1 Technical Data .....................................................................................................................17
2 Overall dimensions...............................................................................................................17 
3 Circuit diagrams ...................................................................................................................18 
SPARE PARTS LIST..........................................................................................................19 
PROBLEM-SOLVING GUIDE ............................................................................................21 
 
 
 
 
 
 

Operation and Maintenance Manual - UCP Fly Mobile

1 - INTRODUCTION

1.1 General Warnings Safety

This appliance must only be used for the function for which it was designed: 'Adiabatic humidifier/cooler'. Any

other use is to be considered improper and dangerous. Franco s. r. l. cannot be held responsible for any

damage resulting from improper, incorrect and unreasonable use or if the appliance is used in installations

which do not comply with current safety regulations.

- Check the integrity of the appliance when opening the packaging, paying particular attention to damage or

deformations of plastic parts that may lead to breakage and/or malfunction during use. In such cases, do not

connect the machine to the mains. Carry out a general inspection of the machine periodically.

- Before connecting the appliance, make sure that the rating plate data correspond to those of your electrical

distribution network. The data label (see par. 1.9) is located on the back of the appliance.

- Observe the safety regulations indicated for electrical equipment and in particular:

•Follow the installation instructions of the appliance.

•Do not place objects on the humidifier.

•Prevent children and/or incapacitated persons from using the device without proper supervision;

•Do not touch the humidifier during operation or while the disc is stopped;

•Never immerse the device in water or any other liquid.

•Do not put any objects inside the tank as the device could be irreparably damaged.

•Do not use accessories, spare parts or components not specified or supplied by the manufacturer.

•Avoid touching the device with wet or damp hands

•Do not pull the power cables or expose them to a risk of shearing.

•Do not leave the device exposed to the weather (rain, sun, etc.).

•In the event of a fault or malfunction of the device, switch it off immediately and disconnect the power

supply. Do not attempt to open or tamper with the appliance: contact a qualified technician.

•Do not attempt to fill or empty the tank when the appliance is in operation.

1.2 Guidelines for the proper disposal of the product

Pursuant to European Directive 2012/19/EU:

At the end of its useful life, the product must not be disposed of with urban waste.

It can be handed in at the special separate waste collection centres set up by

municipalities, or at retailers who provide this service. By disposing of the product

separately, you can avoid possible negative consequences for the environment and health

resulting from its improper disposal, and allows you to recover the materials of which it is

composed in order to achieve significant savings in energy and resources. To emphasise

the obligation to dispose of electrical and electronic equipment separately, the product is marked with a

crossed-out wheeled bin.

1.3 Conventions used in this manual

The manual is divided into chapters, within which the operators to whom the instructions are addressed are

specified, where necessary, in order to operate the machine safely.

The sequence of chapters responds to the temporal logic of the machine's life.

To facilitate immediate understanding of the text, terms, abbreviations and pictograms are used, the meaning

of which is indicated below.

Operation and Maintenance Manual - UCP Fly Mobile

ABBREVIATIONS

Cap. = Chapter

Par. = Paragraph

Page = Page

Fig. = Figure

Tab. = Table

UNIT OF MEASUREMENT

The units of measurement used are those of the International System (SI).

1.4 Keeping and updating the instruction manual

The instruction manualmust be kept with care and must accompany the machine in all changes of ownership

that it may undergo during its life. Parts must not be removed, torn off or arbitrarily modified.

The manual should be stored in an environment protected from humidity and heat and in the immediate

vicinity of the machine to which it refers. At the request of the user, the manufacturer can provide additional

copies of the machine instruction manual.

You can make a request by writing to support@francosrl.com

The Manufacturer reserves the right to modify the design and make improvements to the machine without

notifying the Customer, and without updating the Manual already delivered to the user. However, in the event

of changes to the machine installed at the Customer's premises, agreed with the Manufacturer and entailing

the amendment of one or more chapters of the Instruction Manual, it will be the Manufacturer's responsibility

to send the users concerned the chapters affected by the change.

It is the responsibility of the user to replace the old chapters, homepage and table of contents with the new

ones in all copies owned.

The Manufacturer is responsible for the original Italian language version; in the event of any doubts

regarding the translated versions, please refer to the Italian language and contact the Manufacturer

(support@francosrl.com) for due verification.

1.5 Addressees

This manual is intended for the Installer, Operator and Qualified Personnel authorised to service the machine.

OPERATOR:means the person(s)in charge of installing, operating, adjusting, cleaning, repairing and moving

a machine and performing the simplest maintenance operations;

QUALIFIED PERSONNEL/QUALIFIED WORKMAN: this refers to those persons who have attended

specialisation courses, training, etc. and have experience in the installation, commissioning and

maintenance, repair, transport of the machine.

The machine is intended for industrial use, and therefore professional and not general use, so its use must

be entrusted to qualified persons, in particular who

•have reached the age of majority;

•They are physically and mentally fit to perform work of particular technical difficulty;

•Have been properly instructed in the use and maintenance of the machine;

•They were judged by their employer to be fit to perform the task entrusted to them;

•Be able to understand and interpret the operator's manual and safety instructions;

•They are familiar with emergency procedures and their implementation;

•Possess the ability to operate the specific type of equipment;

•Be familiar with the specific rules of the case;

•Have understood the operating procedures defined by the machine manufacturer.

Operation and Maintenance Manual - UCP Fly Mobile

The appliance may be used by persons with reduced physical, sensory or mental capabilities, or lack of

experience or the necessary knowledge, provided that they are supervised or have received instructions

concerning the safe use of the appliance and understanding of the dangers involved.

1.6 Pictograms

This section explains the meaning of the pictograms indicating the operator's qualification, the state of the

machine, the hazards and the obligations/prohibitions to be observed. Their use makes it possible to quickly

and unambiguously provide the information required for the correct use of the machine in safe conditions.

PICTOGRAMS RELATING TO OPERATOR QUALIFICATION

Symbol

Description

General labourer: an operator without specific skills, capable of carrying out only simple

tasks on the instructions of qualified technicians.

Driver of lifting and handling equipment: an operator qualified to use lifting and handling

equipment and machines (strictly in accordance with the manufacturer's instructions), in

accordance with the laws in force in the country of the machine user.

Mechanical maintenance technician: qualified technician, capable of operating the

machine under normal conditions, operating it with jogging inching operation (JOG) with

protections deactivated, working on mechanical parts to carry out the necessary

adjustments, maintenance and repairs. Typically, he is not qualified to work on electrical

systems where voltage is present.

Electrical maintenance technician: A qualified technician, capable of operating the

machine under normal conditions, operating it with jogging inching operation (JOG) with

protections deactivated, is proposed for all work of an electrical nature for adjustment,

maintenance and repairs. He is able to work in the presence of voltage inside cabinets and

junction boxes.

Manufacturer's technician: qualified technician made available by the manufacturerto carry

out operations of a complex nature in particular situations or, in any case, as agreed with

the user. The skills are, depending on the case, mechanical and/or electrical and/or

electronic and/or software.

Operation and Maintenance Manual - UCP Fly Mobile

SAFETY PICTOGRAMS (ISO 7010)

The pictograms contained in a triangle indicate DANGER.

The pictograms contained in a circle impose a PROHIBITION/OBLIGATION.

Pictogram

Description

Dangerous electrical voltage.

Generic danger.

Do not remove safety devices.

Prohibition of cleaning, oiling, greasing, repairing or

adjusting moving parts by hand.

Obligation to cut power before starting work or

repairs.

Protective gloves compulsory.

Compulsory safety footwear.

Mandatory protective helmet.

Operation and Maintenance Manual - UCP Fly Mobile

1.7 Applications

The UCP Fly Mobile can be used for humidification, dust suppression or delivery of atomised sanitizing

products in small to medium-sized residential, commercial, agricultural or industrial environments.

The device can also be used as an adiabatic cooler. This is possible because atomised water in contact

with ambient air tends to evaporate, absorbing heat and lowering the temperature. The cooling capacity

depends on many variables, such as temperature, room humidity and air distribution.

The UCP Fly Mobile is mounted on a trolley with integrated water tank, which allows the machine to be easily

moved within the room to be humidified or cooled according to the customer's needs, ensuring maximum

versatility of use.

This machine must only be used for the purpose

for which it was designed:

HUMIDIFICATION / ADIABATIC COOLING

All other uses are to be considered improper and potentially dangerous.

1.8 Versions

The UCP Fly Mobile centrifugal humidifier is available in the following version:

3109000 UCP Fly Mobile H25 version with an air flow of 1800 m³/h 230V ~ 50Hz

1.9 Machine identification and nameplate data

Each machine is identified by an EC nameplate on which the article code, serial number and technical data

of the machine are indelibly marked (Fig. 1.9.1).

Always quote these references for any communication with the manufacturer or service centres.

Fig.1.9.1 CE Data plate

Operation and Maintenance Manual - UCP Fly Mobile

1.10 Description of the appliance

Main parts of the unit (Fig. 1.10.1)

Rotary disc

Disc cap

Tub lid

Rear cover

Pump

Nozzle

Regulating

valve

Fixed disk

Protection grid

Water collection tank

Electric box

Protection grid

Fan

Electric motor

Return pipe

Delivery pipe

Pump cable

connector

On/Off switch

Tank

60 L

Braked

wheels

Trolley

Operation and Maintenance Manual - UCP Fly Mobile

1.11 Transport and handling

The machine is shipped in robust packaging.

Take care when opening the packaging to avoid damaging components. Check the integrity

of the machine by checking that there are no visibly damaged parts. Do not dispose of

packaging elements in the environment: they must be placed in suitable collection areas.

The UCP Fly Mobile is a wheeled unit that can be moved on flat surfaces without the aid of

lifting and transport equipment.

WARNING! Before making any moves:

a. stop the machine;

b. Disconnect the machine from the mains;

If it is necessary to lift the machine, use a suitable lifting device (pallet truck, forklift truck, etc.). The weight is

indicated on the nameplate and in the technical data table (see Section 5.1).

1.12 Warranty

This appliance is guaranteed for 12 months from the date of manufacture for all faults attributable to a proven

manufacturing or material defect. The warranty does not cover all parts damaged by transport, bad or

incorrect maintenance, neglect, incapacity for use, improper use, tampering by unauthorised personnel, and

in any case causes beyond the control of Franco s.r.l. of Cervasca (CN). During the warranty period, Franco

s.r.l. undertakes to supply, free of charge, those parts that are found to be defective at source.

The intervention must be carried out by an authorised and qualified technician.

1.13 Manufacturer's identification data

Manufacturer

FRANCO s.r.l.

Legal - administrative headquarters

VIA NAZIONALE, 80 - 12010 CERVASCA (CN) - ITALY

Contact

Tel.: (0039) 0171 - 61.16.63

Email: support@francosrl.com

Web: francosrl.com

1.14 Declarations

The machine to which this manual refers is manufactured in accordance with the relevant European

Community legislation applicable at the time of its placing on the market.

The machine is not among those mentioned in Annex IV of Directive 2006/42/EC.

Operation and Maintenance Manual - UCP Fly Mobile

1.15 EC Declaration of Conformity

THE MANUFACTURER

FRANCO s.r.l.

Company

Via Nazionale, 80 12010 CN

Address Postcode Province

Cervasca Italy

City State

DECLARE under their own responsibility that the machine

Humidifier / Cooler UCP Fly Mobile H25

Description Model

3109000

Article code

UCP Fly Mobile Humidifier/Cooler

Trade name

Room humidification/cooling

Intended use complies with the following European Directives:

2006/42/EC Machinery Directive

(2014/35/EU) (Low Voltage Directive)

2014/30/EU Electromagnetic Compatibility Directive

Harmonised standards and reference specifications used:

EN 12100:2010

EN 60335-1:2012 + A11 +A13 +A1 + A14 + A2 +A15:2021

EN 60335-2-98:2003/A11:2019

EN 60335-2-41:2003/A2:2010

EN 60034-1:2010

EN 55014-1:2017, EN 55014-2:2015, EN 61000-6-1:2016, EN 61000-6-3:2010

Legal person authorised to set up the Technical File:

FRANCO s.r.l.

Name

Via Nazionale, 80 12010 CN

Address Postcode Province

Cervasca Italy

City State

Place and date of document

The manufacturer

Cervasca, 04/02/2022

Signature

Rev. 00/2022

Marco Fantino

Administrator

Indice

Altri manuali FRANCO Accessori

FRANCO

FRANCO 2903000 Manuale di istruzioni

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente