Free2Move eSolutions eProfessional Manuale utente
USER MANUAL GB
2
TABLE OF CONTENTS
INTRODUCTION 3
GENERAL INFORMATION 6
Fields of use 6
ESOLUTIONS CHARGING APP 7
Pairing between eProfessional and app 8
Charging sessions 9
OVERALL VIEW 10
TURNING ON EPROFESSIONAL 11
Operating mode 12
SOCKET AND PLUG INSTALLATION INSTRUCTIONS 13
INSTRUCTIONS FOR USE 15
Preliminary charging operations 15
How to start charging (without authentication) 16
How to charge with authentication 17
LED behaviour 18
MAINTENANCE 19
PRODUCT DISPOSAL 19
ASSISTANCE 20
DISCLAIMER 20
PAGESECTION
3
INTRODUCTION
SAFETY RECOMMENDATIONS
End users are required to read this manual and follow the instructions closely.
Keep this document in a safe place for easy access at all times.
Installation must be carried out by qualied personnel. A dedicated, state-of-the-art electricity supply
system must be designed and installed, and the system must be certied in compliance with local
regulations and the energy supply contract.
Free2Move eSolutions S.p.A. cannot be held liable for damage caused to persons and/or property, or to
the equipment, if the conditions described below have not been complied with.
The warranty requirements are described in the Terms and Conditions of Sale section included with the
purchase order for this product.
WARRANTY AND DELIVERY CONDITIONS
Free2Move eSolutions S.p.A. declares that the equipment complies with the legal provisions currently in
force in the country of installation and has issued the relevant declaration of conformity. Free2Move
eSolutions S.p.A. assumes no responsibility for failure to comply with the instructions for proper
installation, and cannot be held responsible for systems upstream or downstream of the equipment supplied.
Free2Move eSolutions S.p.A. cannot be held responsible for defects or malfunctions deriving from:
improper use of the equipment, deterioration due to transport or particular environmental conditions,
incorrect or insucient maintenance, tampering or unsafe repairs, and use or installation by unqualied
persons.
Free2Move eSolutions S.p.A. is not responsible for any disposal of the equipment, or parts thereof, that
does not comply with the regulations and laws in force in the country of installation.
PURPOSE AND STRUCTURE OF THE DOCUMENT
This use and maintenance manual is a guide to help you work safely, and carry out the operations needed
to keep your equipment in good working order. If the equipment is used in a manner not specied in this
manual, the protection provided by the equipment may be impaired.
This document was originally written in English. In the event of any inconsistencies or doubts, please ask
Free2Move eSolutions S.p.A. for the original document.
LIST OF DOCUMENTS IN THE APPENDIX
In addition to this manual, product documentation can be viewed and downloaded by visiting the
Free2Move eSolutions S.p.A. website esolutionscharging.com /
https://www.esolutions.free2move.com/low-power-charging-solutions/eProfessional/.
4
WARNINGS
Before installing or using the device, make sure that none of the components have
been damaged. Damaged components can lead to electrocution, short circuits, and re due
to overheating. A device with damage or defects must not be used.
Install eProfessional away from petrol cans or combustible substances in general.
Before carrying out any maintenance, ensure the power supply is switched o.
Before installing eProfessional, ensure the main power source has been disconnected.
Before putting back or moving eProfessional, ensure the device is not connected to the
power supply.
eProfessional must only be used for the specic applications it is designed for.
Installation, maintenance or repairs not carried out correctly may pose risks to the user.
Please ensure that eProfessional is only used in correct operating conditions.
The device must be connected to an electricity network in compliance with local and
international standards, and all the technical requisites indicated in this manual.
Children or other persons not able to gauge risks related to the installation or use of the
device could suer serious injury, or put their lives at risk. Such persons must not
operate the device and must be supervised when close to it.
Pets or other animals must be kept away from the device and packaging material.
Children must not play with the device, accessories or packaging provided with the product.
eProfessional does not contain components that the user can repair or maintain
autonomously.
The only part that can be removed from eProfessional (solely during the installation and
dismantling stages and following the instructions) is the removable cover. eProfessional
should not be opened further unless by qualied personnel during installation, dismantling
or maintenance.
eProfessional can only be used with an energy source.
eProfessional must be treated and disposed of in compliance with current legislation,
separately from normal household waste, as electric and electronic waste (WEEE).
5
SYMBOL DESCRIPTION
General warning
It is mandatory to consult the original manual and additional documentation
Prohibition or restrictions
Although they are not made of materials that are harmful to health, the products
should not be disposed of along with household waste but must be collected
separately, because they are made of materials that can be recycled
Sign for electrical voltage hazard
Electronic device installation carried out by qualied personnel only
6
GENERAL INFORMATION
eProfessional is an Alternate Current charging solution for powering electric vehicles and
hybrid plug-ins, and is ideal for semi-public and industrial use. The device is available in
three-phase conguration, charging electric vehicles up to 22 kW and is equipped with a Type 2
socket.
The product includes connectivity options that allow it to be monitored remotely via Web-based
portal. The device can be managed via a dedicated App.
This document describes how to use and maintain the product. A description of the features of
the equipment is provided to indicate its key components and set out the technical terms used
in this manual. This chapter contains information on models, details of equipment, specications
and technical data, overall dimensions and identication of the equipment.
F2ME.EPRFSCYYXXX
F2ME.EPRFSEYYXXX
ields of use
Free2Move eSolutions S.p.A. declines all liability for any damage whatsoever due to incorrect or
careless action.
The equipment may not be used for any purpose other than the one it is intended to full.
The equipment must not be used by inexperienced personnel or even by expert professionals
if the equipment undergoes operations that do not comply with this manual and accompanying
documentation.
This piece of equipment is a charging device for electric vehicles; the following classication
(according to IEC 61851-1) identies its characteristics:
Power supply: connected to the AC power supply grid through three phase plug, according
to EN 60309-1 and EN 60309-2
Output: alternate current
Environmental conditions: indoor/outdoor use
A device for free access places
Fixed wall installation
Protection against electric shock: Class I
Charging type: Mode 2 in accordance with the IEC 61851-1 standard
Optional function for ventilation not supported.
7
eSolutions Charging is a smartphone app, available via Google Play® and App Store®. It can be
used to congure, monitor and set eProfessional via a Bluetooth connection.
When running the app for the rst time, users are asked to provide personal details to register
and create a Free2Move eSolutions account. Personal data and prole settings can be changed
in-app.
8
Pairing between eProfessional and app
The app authenticates and pairs via a QR Code, linking eProfessional to the owner’s user account.
This pairing enables all remote features, such as data collection, display and analysis, as well as
seamless customer support.
It is possible to pair more than one eProfessional. The “Device List” menu allows users to
manage all their wallboxes from a single page.
It is possible to congure a Wi-Fi connection for eProfessional via the App.
QR Code information is given on the label on the back of the charger case, or on the label on
the back of the external cover.
9
Charging sessions
EV drivers have full control of their charging sessions wherever they are. Users can access core
charging session control features, such as:
Start the charging sessions via app
Stop, delay and schedule charging sessions
Monitor the status and progress of each charging session in real-time
Receive notications when charging sessions start and end.
Over-the-air software update.
10
Let’s start by looking at the Figure below, showing eProfessional and its main parts.
LED
Base
External Cover
Indice
Altri manuali Free2Move eSolutions Caricabatterie per batterie
