Freedom Easy Manuale utente
Freedom Easy Pump
Verifone with Mako 6600
Setup Guide
First Data
Heartland
Sinclair
Rev 2 • 11/2021
This guide provides detailed instructions on how to configure the
Mako MNSP, Verifone Commander/RubyCi, FA80 Bridge, and the
wireless access point for use with the Freedom Easy Pump.
Technicians must be VASC certified.
You will need a laptop with a functional ethernet adapter and wireless
capability, and the Managers login for the Configuration Client.
Table of Contents
1. Configure the Mako 6600……….……….…...……………………………………….……2
2. Program the Commander/RubyCi.…………………………....……..………….…….….6
3. Install the Wireless Access Point........................................................…………….…11
4. Program the FA80 Bridge………………………………………...……..…….…............12
5. Install Easy Pump Dispenser Kits…………………………………………………..……13
7. Remove DCR Programming……………………..………………….…………...……….14
1
Freedom Easy Pump
Freedom Easy Pump: Mako
Freedom Electronics
800-761-9369
Verifone VASC
888-777-3536
Mako Networks Support
844-807-0307
First Data(Buypass)
Helpdesk 800-726-2629
Heartland Payment Systems
Helpdesk 800-767-5258
Sinclair Merchant Support
800-524-4799
1. Configure the Mako 6600
It is recommended to contact Mako Support one week before install to allow for pre-
receive confirmation of completion.
Provide Mako the station information and proposed install date. You will be installing the
Freedom Electronics Easy Pump using a Sound Payments Enterprise Template.
Note there are (3) possible configurations depending on site equipment:
Sound Payments 8 Port Switch Enterprise Template
Sound Payments 24 Port Switch Enterprise Template
Sound Payments Legacy Enterprise Template (No managed switch)
For any Mako configuration issues, contact Mako Networks Support.
Please refer to the Mako Networks Quick Installation Guide, if needed.
2
Freedom Easy Pump
Freedom Easy Pump: Mako
Sound Payments 8 Port Switch Template
3
Freedom Easy Pump
MAKO 6600
WAN 1 –INTERNET PROVIDER
LAN 1 –COMMANDER NIC A
LAN 2 –VERIFONE ZONE
LAN 3 –BACK OFFICE
LAN 4 –TRUNK TO SWITCH
MAKO 8 PORT SWITCH
PORT 1 –TRUNK
PORT 6 –FA80 BRIDGE
PORT 7 –WIRELESSACCESS POINT
Easy Pump VLAN
Ports 6-8
Freedom Easy Pump: Mako
Sinclair Sound Payments 24 Port Switch Template
Freedom Easy Pump
4
Easy Pump VLAN
Ports 15-18
MAKO 6600
WAN 1 –INTERNET PROVIDER
LAN 1 –TRUNK TO SWITCH
MAKO 24 PORT SWITCH
PORT 1 –TRUNK
PORT 2 –COMMANDER NIC A
PORT 3-10 –VERIFONE ZONE
PORT 15 –FA80 BRIDGE
PORT 16 –WIRELESSACCESS POINT
Freedom Easy Pump: Mako
Sinclair Sound Payments Legacy Template
(No managed switch)
Freedom Easy Pump
5
MAKO 6600
WAN 1 –INTERNET PROVIDER
LAN 1 –COMMANDER NIC A
LAN 2 –VERIFONE ZONE
LAN 3 –BACK OFFICE
LAN 4 –EASY PUMP SWITCH
EASY PUMP SWITCH
WIRELESSACCESS POINT
FA80 BRIDGE
EASY PUMP
SWITCH
(PROVIDED IN KIT)
Freedom Easy Pump: Mako
2. Program the Commander/RubyCi
In this section we will setup the Commander to accept
Mobile Payments for The Easy Pump.
Note: Always pull a backup before and after you perform the install.
Note: We highly recommend checking and/or replacing the battery at this time.
Note: You will be required to generate an OTP password for network changes.
Minimum Base 53 is required for Sinclair.
Minimum Base 51 is required for First Data and Heartland
1. Login to the Configuration Manager in the CSR Functions of the register,
or by accessing the Configuration Client at the following address:
https://192.168.31.11/ConfigClient.html
Username: Manager
Password: **current manager password**
2. Determine the site’s Latitude and Longitude. There are many ways to do this,
including using Google Maps. Here we use Latlong.net, after entering the street
address you will find the coordinates.
latlong.net
6
Freedom Easy Pump
Freedom Easy Pump: Mako
3. Navigate to Payment Controller > Mobile Payment Configuration > Site Mobile
Configuration. See figure 1 on page 8.
Check “Accept Mobile Payments”
Enter the following and SAVE.
• Site Name: Enter store name
• Welcome message: Welcome
• Data Storage Time(in Days): 30
• Site Address: Enter street address
• Latitude: Enter Latitude
• Longitude: Enter Longitude
• Report: Leave at default
4. Navigate to Payment Controller > Mobile Payment Configuration > Host
Configuration. See figure 2 on page 8.
Check “Enable Host”
Enter the following and SAVE:
• Adapter: VFI Mobile
• Program Name: EASY PUMP
• Merchant ID: mppa2-mer
• Authentication Type: Display Token
• Store ID: mppa2-store
• Settlement Employee#: 5577
• Settlement Passcode: 633225
• Phone Number: Enter site phone number
• Address: 10.128.9.54
• Port: 4710
• Do NOT Check SSL Enabled
• Heartbeat Frequency: 45
• Hearbeat Time Unit: Seconds
• Outdoor PreAuthorization Timeout (In Secs): 180
• Site Initiated Loyalty: Never Allow Site Entered Loyalty
7
Freedom Easy Pump
Freedom Easy Pump: Mako
8
Freedom Easy Pump
Figure 2 Host Configuration
Figure 1 Site Mobile Configuration
Freedom Easy Pump: Mako
5. Navigate to Store Operations > Payment Management > MOP.
See figure 3 on page 10.
Enter the following and SAVE:
• Select the MOBILE MOP position (position 012)
• Change Name to: EASY PUMP
• MOP Code: 28 –MOBILE
• MinimumAmount: 0.00
• Maximum Amount: 0.00
• Limit: 0.00
• Additional Receipts: 0
• Tender Code: Generic
• Tender Sub Code: Generic
• Check: Allow Zero Entry and Allow Refund
6. Navigate to Initial Setup > LocalArea Network Configuration > Device Specific
Routes. See figure 4 on page 10.
Select New
Enter the following and SAVE.
• Route Type: Host
• Destination: 10.128.9.54
• Gateway: 192.168.31.31
• Netmask: 255.255.255.240
• Service: EasyPump
7. Cycle power to the Commander/RubyCi.
9
Freedom Easy Pump
Freedom Easy Pump: Mako
Indice
Altri manuali Freedom Pompa dell'acqua
Manuali Pompa dell'acqua popolari di altre marche
Sykes AmeriPumps
Sykes AmeriPumps GP100M Guida alla risoluzione dei problemi
DUROMAX
DUROMAX XP WX Series Manuale utente
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Manuale utente
Franklin Electric
Franklin Electric IPS Manuale utente
Xylem
Xylem e-1532 Series Manuale utente
Milton Roy
Milton Roy PRIMEROYAL Manuale utente