Any MōVI M5, M10, or M15 can be configured to work with the MōVI
Controller. The MōVI must have firmware version 3.08 or later. The latest
MōVI firmware, release notes, and update instructions are available at
www.freeflysystems.com.
Once running firmware v3.08 or later, change the MōVI Radio Type from
the default (DSMX 2048) to MōVI Controller. This can be done from any of
the Freefly Configurator apps (PC, Mac, Android) in the Remote Controller
Config menu.
The values of the other parameters in this menu (Map Remote Mode, etc.)
do not matter for this Radio Type and can be left at their defaults.
After installing the MōVI Controller Receiver (see Receiver Installation
section below, or the Quick Start guide included in the package) and
configuring the MōVI Radio Type as above, the MōVI Controller is ready to
send commands and receive data from the MōVI. As with the Spektrum
DX7/DX8 remote controller, the feel of the joystick can be adjusted from
the Remote Operator Config menu.
MōVI CONFIGURATION:
