FREEWAY TA180 Manuale utente
Doc No.995062 Revision of document: A
Rev Date: 26.04.2021
TA180 Transfer Aid
Service Manual
995062 –Revision A Page 2of 23
Contents
1.0 –Introduction ................................................................................................................................... 3
2.0 –Safety Precautions ......................................................................................................................... 3
3.0 –Servicing .........................................................................................................................................4
4.0 –Tools, Equipment and Lubricants Required for Servicing .............................................................. 5
5.0 –Decommissioning........................................................................................................................... 6
6.0 –Spare Parts List............................................................................................................................... 7
7.0 –Servicing –Removal and Replacement .......................................................................................... 8
7.1 –Crossbar ..................................................................................................................................... 8
7.2 –Seat Pad.................................................................................................................................... 10
7.3 –Knee Pad...................................................................................................................................12
7.4 –Foot Tray .................................................................................................................................. 13
7.5 –Front Castor..............................................................................................................................14
7.6 –Rear Castors ............................................................................................................................. 15
7.7 –Manual Leg Rods ...................................................................................................................... 16
7.8 –Manual Leg Opener.................................................................................................................. 17
7.8 –Leg ............................................................................................................................................20
7.9 –Frame .......................................................................................................................................22
995062 –Revision A Page 3of 23
1.0 –Introduction
This Manual will explain how to carry out interim servicing and parts replacement on the Freeway
TA180 Transfer Aid safely and effectively. This document is divided into sections to help a Service
Engineer find the correct information. Each section will show in a step by step fashion the correct
way to disassemble and assemble the Transfer Aid. The aim of the manual is to help and assist you,
so that you can provide a successful service for the end user.
2.0 –Safety Precautions
Read and understand this manual in its entirety before servicing the Freeway TA180.
Freeway authorised personnel must complete the Full and Interim services of the Freeway
TA180.
The Transfer Aid must not be in use by the user during any form of servicing.
Ensure that the all servicing procedures are followed correctly as instructed in this manual.
All listed tools and equipment stated in this manual must be used to safely service this
Transfer Aid.
Ensure you have assessed all risks for your environment and any persons within that
environment before commencing work.
Ensure you have all PPE available to carry out the work before commencing.
995062 –Revision A Page 4of 23
3.0 –Servicing
To be completed by Approved Service Engineer
Maintenance should be completed by an approved service engineer every 6 months to ensure the
products required standard is maintained. The service history of the product should be documented
each service.
When Servicing the Transfer Aid, ensure to fill out the Service Log which is located in the back of the
User Manual. When doing so, ensure the Serial Number of the Product and the User Manual match
up. Each Transfer Aid has its designated User Manual which is supplied to the User during
commissioning.
Component
Service/Inspection required
Generic:
Visual inspection of the externals of the Transfer Aid.
Significant damage that may affect the function of the Transfer
Aid along with a clear safety hazard is unacceptable.
Check the Labelling on the hoist to ensure they are all still
legible, this includes the Serial Number and other important
markings.
Clean the Transfer Aid at the end of each service. See User
Manual for cleaning details.
Check all main nuts and bolts to see if they are loose, if so
tighten accordingly.
Check all pivot points for wear.
Crossbar:
Ensure Crossbar is aligned correctly, with the Labels facing
Horizontally. Re-adjust accordingly.
Knee Pad:
Inspect the Knee Pad for damage including cuts and breaks.
Ensure Knee Pad is still secure and has a slight ability of
rotation.
Seat Pads:
Ensure the seat pads swivel smoothly.
Ensure the seat pads are not damaged, including cuts and
brakes.
Ensure the seat pads align with each other as intended, no
deformation is present.
Foot Tray:
Ensure the Foot Grips are still applied and undamaged.
Inspect the Foot Tray for any permanent deformation or
fatigue.
Ensure no cracks are present and the Foot Tray is attached
correctly.
Ensure Foot Tray is fitted correctly.
Manual Leg Opener:
Check Leg Opener device, opens and closes the Legs as
intended, ensure it does not require excessive force to
perform this action.
Legs:
Ensure Legs are perpendicular to the Base when closed.
Brakes:
Ensure the Brakes function when activated
Ensure the Transfer Aid can move freely when the Brakes are
deactivated. (Ensure they aren’t rubbing on the Wheels)
995062 –Revision A Page 5of 23
Castors and Wheels
Examine the products Wheels and Castors for signs of damage
or wear, ensure they run freely and are not cracked.
Check to see all castors are flat on the floor and Transfer Aid
is stable.
Ensure the product is able to rotate freely with ease.
4.0 –Tools, Equipment and Lubricants Required for
Servicing
When carrying out work on the Freeway TA180 Transfer Aid you will require the following:
Tools Required
15mm Spanner
17mm Spanner
17mm Ratchet Spanner
2.5mm Allen Key
3mm Allen Key
5mm Allen Key x2
6mm Allen Key
Parallel Pin Punch
Circlip Pliers
Small Nylon Hammer
Equipment Required
Marker Pen
Cloth
Lint Free Cloth
Set Square
Sundries Required
Loctite 243
995062 –Revision A Page 6of 23
5.0 –Decommissioning
When the Transfer Aid has completed its life cycle and can no longer perform to its intended use
safely, the Transfer Aid must be decommissioned by an approved Service Engineer. The following
specifies the importance of correct disposal procedure including local laws and being
environmentally friendly.
Please observe the local laws on recycling and respect the current laws for disposal within the
community the device is being used within. If there is any uncertainty of the below guidelines,
contact your local authorities to determine the proper method of disposal of potentially
biohazardous parts and accessories.
The relevant components utilised in the manufacture of the device that can be recycled at the end of
the device life are:
Fully recyclables:
Consideration when Recycling:
Steel frame (Frame, Crossbar, Legs)
Seat Pads
Castors
Knee Pad
Initial packaging of the device (cardboard)
Metallic fixing –screws etc.
995062 –Revision A Page 7of 23
6.0 –Spare Parts List
The parts listed below are all the spare parts a service engineer requires to perform a service on a
Freeway TA180
Part Code
Description
107260
Foot Tray Assembly
107908
Manual Leg Rod Assembly
107955
Finger Trap Guard Assembly
107960
Freeway TA180 Main Frame Assembly
107961
LH Leg Assembly
107962
RH Leg Assembly
107963
Knee Pad Assembly
107964
Freeway TA180 Crossbar Assembly
107965
Manual Leg Opener Assembly
107966
Freeway TA180 Seat Pad Assembly
107902
Rear Castor Kit (Pair)
107901
Front Castor Kit (Pair)
999062
Freeway TA180 User Manual
992062
Freeway TA180 Spare Parts Manual
992367
Freeway S180E Spare Parts Manual
995062 –Revision A Page 8of 23
7.0 –Servicing –Removal and Replacement
This section will cover the details of how to remove, refit and replace all serviceable parts to the
Transfer Aid. The step by step process is to be followed in sequence to perform a successful service
on the Product. Unless stated otherwise, all images refer to a Freeway TA180.
7.1 –Crossbar
This section will instruct the correct procedure on how to remove and replace the TA180
Crossbar.
Removal
Step 1 –Using a 15mm Spanner, remove the Bolt from the Frame to release the Crossbar as
shown, do this for both sides of the Frame.
Step 2 –Remove the Crossbar from the Frame, ensure not to lose the white saddle washers
from either end.
995062 –Revision A Page 9of 23
Refitting / Replacement
Step 3 –Refitting is a reversal of the removal process noting the following points:
A) When aligning the Crossbar, ensure to align the white saddle washers correctly as
shown.
B) Position the Crossbar to ensure correct orientation of the Crossbar, with the Labels
facing horizontally.
C) Apply Loctite 243 to the Crossbar securing bolts.
995062 –Revision A Page 10 of 23
7.2 –Seat Pad
In this section it will explain the correct procedure on removing and refitting the Seat Pad.
Removal
Step 1 –Remove the Finger Trap Guard using a 2.5mm Allen Key on the two screws shown.
Step 2 –Using a small Hammer and a Parallel Pin Punch, remove the small retaining pin
which secures the Nut in place.
Step 3 –Using a 17mm Spanner, remove the nut from position.
Altri manuali per TA180
1
Indice
Altri manuali FREEWAY Ausilio alla mobilità
