Fri-Jado 36-2-C SS Manuale utente

MCC –Cold / Ambient

US EN (Original Instruction) 9124744 / 2207

USER MANUAL

Modular Convenience Counter –Cold

Modular Convenience Counter –Ambient

WARNING

Read the instructions before using the machine.

MCC –Cold / Ambient

US 2/40

KEEP THIS USER MANUAL FOR FUTURE USE

We advise you to contact your supplier for the guarantee period and conditions. Further we refer to

our General Terms and Conditions for Sales and Delivery that are available upon request.

The manufacturer does not accept any liability for damage or injury caused by failing to adhere to

these regulations or by not observing the usual caution or care in actions, operation, maintenance

or repair activities, even if not explicitly described in this manual.

As a result of constant commitment to improvement, it may happen that your unit deviates in detail

from what is described in this manual. For this reason, the given instructions are only a guideline for

the installation, use, maintenance and repair of the unit referred to in this manual.

This manual has been composed with the utmost care. The manufacturer shall, however, not be

held responsible for any mistakes in this manual nor for any consequences thereof.

The user is allowed to copy this manual for own use. Further all rights are reserved and nothing in

this manual may be reproduced and/or made public in any way.

Modifications:

In case of unauthorized modifications in or on the unit, every liability on the part of the manufacturer

becomes null and void.

MCC –Cold / Ambient 
US 3/40 
CONTENTS 
 
INTRODUCTION..............................................................................................................5 
1 General.............................................................................................................................5 
2 Identification of the unit.....................................................................................................5 
3 Pictograms and symbols...................................................................................................5 
4 Safety instructions ............................................................................................................6 
4.1 General........................................................................................................................6 
4.2 Self-contained units with propane refrigerant (R290)...................................................7 
4.3 Cold units with remote CO2(R744) refrigerant.............................................................8 
4.4 Moving (when applicable)............................................................................................8 
4.5 Outdoor use restrictions...............................................................................................8 
5 Hygiene ............................................................................................................................9 
6 Service and technical support...........................................................................................9 
7 Storage.............................................................................................................................9 
8 Disposal............................................................................................................................9 
DESCRIPTION OF THE UNIT........................................................................................10 
1 Technical description......................................................................................................10 
2 Intended use...................................................................................................................10 
3 Accessories....................................................................................................................10 
INSTALLATION AND FIRST USE .................................................................................11 
1 Unpacking the unit..........................................................................................................11 
1.1 Unpacking the front doors (optional)..........................................................................12 
2 Installation and positioning..............................................................................................12 
2.1 Level the unit.............................................................................................................13 
2.2 Mounting the plinths...................................................................................................13 
2.3 Mounting front doors (optional)..................................................................................14 
2.4 Applying price rail ......................................................................................................15 
3 Drop-in units...................................................................................................................15 
4 Repositioning the glass shelves......................................................................................16 
5 Plateau Options..............................................................................................................17 
6 First use..........................................................................................................................18 
OPERATION AND USE ................................................................................................. 19 
1 Control Panel Cold Units.................................................................................................19 
1.1 Control Panel –Self-contained units..........................................................................19 
1.2 Control Panel –Remote units....................................................................................20 
2 Control Panel Ambient Units...........................................................................................22 
CLEANING AND MAINTENANCE.................................................................................23 
1 Maintenance schedule....................................................................................................23 
2 Daily Cleaning.................................................................................................................23 
3 Weekly Cleaning.............................................................................................................23 
4 Cleaning Glass Panes ....................................................................................................24 

MCC –Cold / Ambient 
US 4/40 
5 Cleaning interior bottom..................................................................................................30 
6 Cleaning the condenser –Self-Contained Cold units......................................................30 
MALFUNCTIONS AND SERVICE.................................................................................. 31 
1 Replace the mains cord..................................................................................................31 
TECHNICAL SPECIFICATIONS ....................................................................................32 
 
 

MCC –Cold / Ambient

US 5/40

1. INTRODUCTION

1.1 General

This manual is intended for the user of the Cold and Ambient MCC (Modular Convenience Counter).

The features and controls are being described, along with directions for the safest and most efficient

use, in order to guarantee a long life of the unit.

All pictograms, symbols and drawings in this manual apply to all available Cold and Ambient MCC

(US) models.

1.2 Identification of the unit

The identification plate can be found on the outside of the machine, and contains the following data:

•Name of the supplier or the manufacturer

•Model

•Serial number

•Year of construction

•Voltage

•Frequency

•Power consumption

1.3 Pictograms and symbols

In this manual, the following pictograms and symbols are used:

WARNING

Possible physical injury or serious damage to the unit, if the instructions are not

carefully followed.

WARNING

Risk of Fire.

WARNING

Hazardous electrical voltage.

SAFETY

Wear safety gloves for installation and dismantling.

SAFETY

Wear eye protection when working on the refrigeration system.

Suggestions and recommendations to simplify indicated actions.

MCC –Cold / Ambient

US 6/40

Recycling symbol.

WARNING

System contains refrigerant under high pressure

1.4 Safety instructions

WARNING

Self-contained Cold units: Risk of Fire or explosion. Flammable refrigerant used.

WARNING

The maximum load on top of the unit may never exceed 22 lbs.

WARNING

See installation instructions for grounding requirements.

WARNING

Remote CO2(R744) units: The system contains refrigerant under high pressure.

Do not tamper with the system. It must be serviced by suitably qualified persons

only.

WARNING

Always use the brakes on both front wheels when applicable:

1.4.1 General

The user of the unit will be fully responsible for abiding the locally prevailing safety- rules and

regulations.

The unit may be operated by qualified and authorized persons only. Anyone working on or with this

unit must be familiar with the contents of this manual and carefully follow all guidelines and

instructions. Never change the order of the steps to be performed. The management must instruct

the personnel on the basis of this manual and follow all instructions and regulations.

The pictograms, labels, instructions and warning signs attached to the unit, are part of the safety

measures. They may never be covered or removed, and have to be clearly visible during the entire

lifetime of the unit.

Immediately repair or replace damaged or illegible pictograms, warnings and instructions.

•To avoid short-circuiting, never clean the unit using a water hose. For cleaning instructions,

see section 5.

•The Cold unit must be cleaned regularly to ensure proper functioning and to avoid the

outbreak of fire (overheating). Especially the back of the fan plate.

•Do not store explosive substances such as aerosol cans with flammable propellant in this

appliance.

•This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they

MCC –Cold / Ambient

US 7/40

have been given supervision or instruction concerning use of the appliance in a safe wayand

understand the hazards involved.

•Children shall not play with the appliance.

•Cleaning and user maintenance shall not be performed by children without supervision.

1.4.2 Self-contained units with propane refrigerant (R290)

Propane refrigerant is environmentally friendly but also highly flammable. It is non-

toxic with zero Ozone Depletion Potential (ODP) and very low Global Warming

Potential (GWP).

Read this manual carefully and follow all precautions described herein.

R290

WARNING

The propane refrigerant is highly flammable. All safety precautions must be followed.

Keep all ventilation openings in the housing of the appliance or in the installation

unobstructed.

Do not use mechanical devices or other means to accelerate the defrosting process,

other than those recommended by the manufacturer.

Do not damage the refrigerating circuit.

Do not use electrical appliances inside the food/ice storage compartments unless

they are of the type recommended by the manufacturer.

Propane refrigerant does not contain odorants.

SAFETY

Wear eye protection when working on the refrigeration system.

•Install the unit in a well ventilated area with sufficient floor space: refer to the data plate for

minimum space requirement.

•Do not install the unit in basements, in area’s with open flames or high surface temperatures.

•Do not tamper with the system.

•The system must be installed and maintained by qualified persons only.

•The ventilation openings of the cladding of the unit (including accessories) must not be

blocked or covered. Ensure that the air circulation remain unobstructed.

•Electrical devices used within this unit must be certified by the applicable ATEX directive.

Residual risks:

•Sparks from electrical devices or hot surfaces may unintentionally ignite possible leaked

refrigerant gas.

MCC –Cold / Ambient

US 8/40

1.4.3 Cold units with remote CO2(R744) refrigerant

WARNING

Remote CO2refrigerant is environmentally friendly but under high pressure. It is non-

toxic with zero Ozone Depletion Potential (ODP) and very low Global Warming

Potential (GWP).

Read this manual carefully and follow all precautions described herein.

SAFETY

Wear eye protection when working on the refrigeration system.

•Do not tamper with the system.

•The system must be installed and maintained by suitably qualified persons only.

•Fixate the unit to the floor.

•The ventilation openings of the cladding of the unit (including accessories) must not be

blocked or covered. Ensure that the air circulation remain unobstructed.

•A pressure relief device shall be installed in the high-pressure side of the refrigeration system

between the motor-compressor and the gas cooler. There shall be no shut off devices or

other components except piping between the motor-compressor and the pressure relief

device that could introduce a pressure drop.

•The pressure relief device shall be mounted so that any refrigerant released from the system

during its operation cannot cause harm to the user of the appliance. The aperture shall be

located so that it is unlikely to be obstructed in normal use.

•The installed pressure relief device shall have no provisions for setting by the end user.

•The pressure setting of the installed pressure relief device shall be no higher than the design

pressure of the high-pressure side.

1.4.4 Moving (when applicable)

When moving the unit:

•Before moving the unit, first switch off the mains voltage by pulling the plug from the wall

socket.

•Remove pans containing a liquid product from the unit.

•Always keep the unit in upright position.

•Make sure that the wheels can move freely, so they never touch the power lead.

1.4.5 Outdoor use restrictions

WARNING

To avoid short-circuiting, the units may not be used outdoors or in a rainyor very moist

environment.

MCC –Cold / Ambient

US 9/40

1.5 Hygiene

WARNING

Immediately remove products in damaged packaging from the equipment and

destroy the products. Clean all components that have come in contact with products

from damaged packaging.

The qualityof a fresh product always depends onhygiene. It is essential that products are packaged

immediately after preparation. Prevent fresh raw vegetables or already prepared, cooled products

from coming into contact with raw meat products to avoid transmitting salmonella. First thoroughly

clean hands and/or tools that have touched raw meat.

Be aware that high humidity levels may encourage the growth of biological organisms in the

environment.

Refer to the cleaning instructions of section 5.

1.6 Service and technical support

The electrical schematics of your unit is included. In case of malfunctions you can contact your

dealer/service agent. Make sure you have the following data available:

•Model.

•Serial number.

This data can be found on the identification plate.

1.7 Storage

If the unit will not be used temporarily, and will be stored, follow these instructions:

•Clean the unit thoroughly.

•Wrap the unit from getting dusty.

•Store the unit in a dry, non-condensing environment.

•Do not expose units with propane refrigerant (R290) during storage and transport to

temperatures higher than 158ºF.

•Ensure good ventilation.

1.8 Disposal

WARNING

Self-contained units: Propane refrigerant is highly flammable. All safety precautions

must be followed.

WARNING

Remote CO2(R744) units: The refrigeration system is under high pressure.

Do not tamper with it. Contact qualified service personal before disposal.

Dispose of the machine, any components or lubricants removed from it safely in

accordance with all local and national safety and environment requirements.

MCC –Cold / Ambient

US 10/40

2. DESCRIPTION OF THE UNIT

2.1 Technical description

The panels are made of galvanized steel plating, stainless steel or aluminum. Some of the visible

internal and external parts have been provided with a powder coating. The glass used is tempered

or layered. The unit can be moved by means of a pallet truck. The controls for operating the

appliance have been mounted on the operator side of the unit. The product contact parts are made

of stainless steel AISI 304 or AISI 430 and tempered glass.

Cold Units:

Cooling is achieved by means of a thermostatic temperature-controlled cold airflow. The cold air is

passed via the back and shelves over the products. Self-serve models have an additional set of

fans mounted in the top to create a stable air curtain on the open side of the cabinet to minimize the

infiltration of warm ambient air. The air on the front side passes through the suction grid in the

bottom of the unit. The MCC Cold unit is available in a 2, 3 and 4 level execution.

The temperature of the airflow is controlled electronically. The electronically-controlled thermostat

is factory programmed for the correct temperature. The set temperature can be changed from 30.2ºF

to 41ºF.

The units can be connected to a fixed drainage system or an optional evaporation tray to evacuate

condensation water. One LED-module per level provides for lighting of the products. Lighting will

automatically go on when switching on the cooling. Self-serve models can be fitted with an option

night curtain. For the Self-serve models there are two user variants; a solid back version and a pass

through version which allows the user to (re)fill products via the back side.

Ambient Units:

The MCC Ambient unit is available in a 2, 3 and 4 level execution. One LED-module per level

provides for lighting of the products.

2.2 Intended use

Self-serve models (SS models) have been designed solely to keep packaged products cold and/or

to display them. Full serve models can be used for unpacked foodstuff as well. Any other use will

not be regarded as intended use.

The manufacturer accepts no liability whatsoever for loss or injury caused by failing to strictly adhere

to the safety guidelines and instructions in this manual or due to carelessness during installation,

use, maintenance and repair of the unit referred to in this manual and any of its accessories.

Use the unit in perfect technical condition only.

2.3 Accessories

Your unit contains the following standard accessories:

•User manual,

•Plinth set,

•Front doors (when applicable).

For optional accessories see www.frijado.com.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fri-Jado Vetrina

Fri-Jado

Fri-Jado MC 75 Manuale utente

Manuali Vetrina popolari di altre marche

Hatco

Hatco FLAV-R-SAVOR FSCD Series Manuale utente

Bonnet Neve

Bonnet Neve SKYLIGHT Manuale utente

True

True TCGD-50 Manuale utente

Tecnodom

Tecnodom EVO SELF Istruzioni operative

Delfield

Delfield F15SC48N Manuale utente

saro

saro FIONA Manuale utente

Hendi

Hendi 233962 Manuale utente

Hoshizaki

Hoshizaki HNC-120BE-L-BLH Manuale utente

Nordcap

Nordcap GENIUS 2 H145-L70 Manuale utente

Omcan

Omcan RS-CN-0140-D Manuale utente

Tecnodom

Tecnodom M Series Istruzioni operative

freor

freor MERCURY Manuale utente

Costan

Costan WHALE 2000 G LG300 Manuale utente

Costan

Costan IMPALA Manuale utente

True Manufacturing Company

True Manufacturing Company TCGD-50 Manuale utente

Bartscher

Bartscher 100L Manuale utente

Steelcase

Steelcase Opus Manuale utente

Hatco

Hatco Glo-Ray GRHD-2P Guida all'applicazione