FRONIUS RC Panel Pro Manuale utente
Fronius prints on elemental chlorine free paper (ECF) sourced from certified sustainable forests (FSC).
/ Perfect Charging / Perfect Welding / Solar Energy
RC Panel Pro
EN-US
Operating instructions
42,0426,0282,EA 003-22112021
General
Safety WARNING!
Incorrect operation and incorrectly performed work can cause serious injury and
damage to property.
All work listed in this document may only be performed by trained specialist personnel.
All functions described in this document may only be used by trained specialist person-
nel. All work and functions described may only be performed and used once the follow-
ing documents have been read and understood in full:
▶This Document
▶All Operating Instructions for system components, especially the safety rules
Device Concept The remote control has the same functionality as the power source’s control panel. A
precise description of the possible settings can be found in the power source's Operating
Instructions.
NOTE!
To be able to use the remote control, the welding system must have a TPS/i power
source.
NOTE!
Because of firmware updates, certain functions may be available that are not de-
scribed in these Operating Instructions or vice versa.
Scope of Supply
(1)
(2)
(3)
(1) Remote control
(2) TPS/i Key Card
(3) This document
Technical data Supply voltage + 24 V DC
Protection class IP 44
Marks of conformity CE, FCC
3
EN-US
Dimensions (l x w x h) 260 x 220 x 60 mm
10.24 x 8.66 x 2.36 in.
Notes on Radio
Certification
The device is equipped with a wireless module.
Wireless modules in the USA require FCC certification:
FCC
This device complies with Section 15 of the FCC Rules. Operation is subject to the fol-
lowing conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
FCC ID: QKWSPB209A
Industry Canada RSS
This device complies with Industry Canada license-exempt RSS standards. Operation
is subject to the following conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
IC: 12270A-SPB209A
Unless otherwise expressly permitted by the manufacturer, changes or modifications to
the wireless module are not allowed and lead to a loss of the right of use of the device by
the user.
NOTE!
This device has been tested and meets the limit values for a Class A digital device
as per Section 15 of the FCC Rules.
These limit values are designed to provide adequate protection against harmful interfer-
ence when the device is operated in a commercial environment. This device generates,
uses and can emit high-frequency energy, and if it is not installed and used as per the
Operating Instructions, it may cause harmful interference to wireless communication. Op-
erating this device in a residential area may lead to harmful interference, which the user
must rectify at their own cost
4
Controls, connections and indicators
Keys and Sym-
bols
(1)
(2)
(3)
(4)
(1)
(5)
(6)
(7)
(1) Control dial with rotary/push button function
For selecting elements, setting values and scrolling through lists
(2) Special function button
For selecting special functions depending on configuration
(3) Gas-test button
For setting the required amount of gas on the gas pressure regulator.
After pressing the gas-test button, gas is emitted for 30 seconds. Pressing the
button again ends the process early
(4) Touch display
(5) Wire-threading button
For threading the wire electrode into the torch hosepack without gas or current
(6) Wire-return button
For retracting the wire electrode without gas or current
NOTE!
Only retract the wire electrode a small amount at a time, to avoid the wire elec-
trode becoming entangled during retraction.
(7) Reading zone for TPS/i Key Card and TPS/i Key Fob
For locking/unlocking the remote control using the TPS/i Key Card and TPS/i
Key Fob
5
EN-US
(8)
(9)
(8) Pivoting mounting and positioning bracket
(9) USB port
For connecting USB flash drives (service dongle, license key, etc.)
6
Installation and Startup
Mount Remote
Control on a
Handle Tube
CAUTION!
Danger of injury and damage to property due to falling remote control.
Always secure the remote control against falling.
1
Connect Remote
Control to Sys-
tem Components
1
7
EN-US
Fronius International GmbH
Froniusstraße 1
4643 Pettenbach
Austria
contact@fronius.com
www.fronius.com
Under www.fronius.com/contact you will find the adresses
of all Fronius Sales & Service Partners and locations.
spareparts.fronius.com
SPAREPARTS
ONLINE
Altri manuali per RC Panel Pro
2
Indice
Altri manuali FRONIUS Sistema di saldatura
FRONIUS
FRONIUS VarioStar 1500 Manuale utente
FRONIUS
FRONIUS MTB 200i G ML/L268/flex Manuale utente
FRONIUS
FRONIUS TransSteel 5000 Manuale utente
FRONIUS
FRONIUS VR 1500-M Manuale utente
FRONIUS
FRONIUS TransSteel 2200c Manuale utente
FRONIUS
FRONIUS TransTig 800 Manuale utente
FRONIUS
FRONIUS TPS/i Push Manuale utente
FRONIUS
FRONIUS WF 15i Manuale utente
FRONIUS
FRONIUS Robacta TSS /i Manuale utente
FRONIUS
FRONIUS TransTig 2200 Manuale utente
FRONIUS
FRONIUS TransTig 170 Manuale utente
FRONIUS
FRONIUS Drive EasyTwin Manuale utente
FRONIUS
FRONIUS TransSteel 4000 Pulse Manuale utente
FRONIUS
FRONIUS MIG/MAG Manuale utente
FRONIUS
FRONIUS DeltaSpot Series Guida
FRONIUS
FRONIUS TPS 2700 MV Manuale elenco delle parti
FRONIUS
FRONIUS TRANSTIG 330 Manuale utente
FRONIUS
FRONIUS VR 7000 Manuale utente
FRONIUS
FRONIUS Virtual Welding 2.0 Manuale utente
FRONIUS
FRONIUS MAGIC WAVE 2000 FUZZY Manuale utente
