FILTERED WATER BOTTLE
USER MANUAL
Model Number 67015
GRN LINE
WATE R FLOW
INTRODUCTION
Thank you for purchasing the Frontier Flow GRN Line Filtered Water Bottle, the perfect
way to enjoy great tasting, pure water with just a squeeze and a sip.
The Frontier Flow is designed for ease of use and reliable service. To ensure proper
performance please follow these simple steps.
CAUTIONARY STATEMENTS
• CAUTION - To avoid cross contamination: Do not handle mouthpiece with wet hands
that been exposed to contaminated water. Do not submerge mouthpiece or
unconnected filter in contaminated water.
• CAUTION - Do not freeze filter or expose filter to extreme temperatures
PRODUCT INSTRUCTIONS
GRN LINE
WATER FLOW
HOW TO FILL AND USE WATER BOTTLE
STEP 1
Unscrew the cap and remove
cap and filter from bottle.
STEP 2
Fill water up to the 20 oz fill
line and screw cap back on.
STEP 3
Open cap and sip through the
Bite MeTM valve. Squeeze to
accelerate flow.
FILL LINE
20OZ
FEATURES
• Replaceable Series II, GRN Line Filter
• Patented, leak proof Bite-Me™ valve
• Dust Cap keeps valve clean and sanitary
• BPA free, soft, squeezable LDPE bottle
• Finger ring for easy filling and secure attachment to packs or equipment
• Fits in bike bottle cages or cup holders
FILTERED WATER BOTTLE
(GRN Line Series II)
1. Your Frontier™ Water Bottle can be cleaned with hot, soapy water or by
placing it on the top rack of a dishwasher.
2. Clean the cap by removing the Bite Me™ valve and washing it with hot,
soapy water or by placing the cap with the dust cover open on the top rack of a
dishwasher. Allow to air dry before storing.
3. Clean the Bite Me™ valve by pulling it from the top of the cap and washing it
in the “silverware” tray of a dishwasher. Allow to air dry before replacing in cap and
storing.
4. Replace the Bite Me™ valve by pressing the base of the valve into the top of
the cap with a twisting motion until the flange is fully engaged.
5. The filter can be stored wet and in place for short periods of time (<30 days) due to
the
action of the Miraguard™ Antimicrobial* Technology.
6. If you need to store the filter for long periods of time (>30 days):
a. Remove the filter from the bottle.
b. Remove the straw.
c. Shake out any excess water and allow the filter to dry at least 48 hrs. prior to
storage.
d. Store in a cool, dry place. Do not store in a sealed container.
7. Do not freeze filter. Freezing a wetted filter may damage the filter media and
compromise the filter integrity.
8. Do not expose filter to extreme temperatures.
MAINTENANCE AND STORAGE
COMPONENTS
PARTS LIST
PART # ITEM NAME
Bottle
GRN Line Series II Filter
Barbed Adapter
Straw
Bottle Cap
014029-002
076727
045294-033
050110
70074-122
3
4
5
2
1
1245
GRN LINE
WATER FLOW
3
REMOVE AND REPLACE FILTER
STEP 1
Unscrew the cap from the water
bottle.
STEP 2
Pull down on filter to disconnect
from seal on cap.
STEP 3
To attach straw, dip straight cut
end of straw 1" deep into hot
water. After 10-15 seconds
remove and push over barb.
Once straw is attached, pinch
the Bite MeTM valve with one
hand, and push filter upwards
into the cap with the opposite
hand.
STEP 4
Once connected, press down
on the Bite MeTM valve to align
correctly in cap.
RED LINE
WATER FLOW
CORRECT
INCORRECT
EPA Est. No 71766-UT-001
