frozy FR25 SI Manuale utente
Buz Makineleri
Ice Makers
USER MANUAL
01
Max 5 Bar
Min 1 Bar
02
03
04
07
08
0505
06
On-Off
Ice Size Dim
Cleaning
10 cm
10 cm
20 cm
Location: In case the unit is located in an area with no side
ventilation, ice making capacity will be decreased by 20%
of the posted limit. Leaving enough room around the unit
will allow the unit work properly. Normal ice-production
capacity is directly relevant with the condenser air delta
temperature, water temperature, states of the condenser
air channel and age of the machine.
Location: The ice machine must be located inside
temperature controlled room. Running the ice machine
outdoors or in an area that the temperature can go
outside of the working limits may harm the machine,
and your warranty may become void. Ice machines are
designed and built with the highest respect for security.
Dear Customer,
Your Ice-Maker was manufactured at the Eskişehir Facilities of
TASİS Makine Mühendislik Sanayi ve Ticaret A.Ş.
Please always have your Ice Maker installed by an Authorized Service.
Your manufacturer’s warranty might become void in the case your Ice Maker has
been installed by a third party service.
NOTE:
This User’s Manual has been issued for several models.
Some features mentioned in this manual (indicated by *) may not be available on
your product.
“READ THE INSTRUCTIONS BEFORE ASSEMBLING OR USING THIS ICE MAKER.”
This product has been manufactured in environment-friendly modern facilities
without harming the environment.
TABLE OF CONTENTS
Chapter 01..... Safety warnings
Chapter 02..... General Outlook and Technical Specifications
Chapter 03..... Installation of Your Ice Maker
Chapter 04..... Operating Instructions
Chapter 05..... Cleaning and Maintenance
Chapter 06..... Troubleshooting
Chapter 07..... Warranty Information
Chapter 01. Safety warnings
1. Always plug in your product to a grounded power outlet.
2. Your ice maker is designed to operate at voltage shown on Technical Table.
Running the product at a different voltage may cause the product to become
dysfunctional or even may cause fire.
3. Do not place your ice maker next to any heat source.
4. Set up your ice maker at a humidity-free location and with un-obstructed air
circulation around the unit.
5. After the installation is done, do not move your ice maker and wait for at least
two hours to start it.
6. Make sure you cleaned the inside surface of your product before first use.
7. Do not use power strips or extension cords to run your product.
8. Protect the power cord against hot surfaces.
9. Do not let un-trained and/or unsupervised children younger than 8 years old
operate your ice maker.
10. The cleaning and maintenance of the device should not be made by children
unless they are under supervision. (Whoever wrote this must have had a bad
experience or trouble with children)
NOTE
This product bears (AEEE/WEEE) classification symbols indicating waste electric
and electronic equipments. Accordingly, the user must comply with the European
directive 2002/96/EC on recycling for the purpose of minimizing the impact of the
waste product on the environment. It is recommended to communicate with local
authorities about waste disposal.
Caution! This contains information necessary for prevention of serious hazards
which may cause the product to become dysfunctional, or may cause injury or loss
of life and property during the use of the product.
Warning against electric shock.
This indicates the explanatory and facilitating information related to use of the
product.
Chapter 02. General Outlook and Technical Specifications
Ice Storage Bin
Stainless Steel
Body
Ventilation
Filter
Button Group
Adjustable Leg*
Small differences in color and other variations are possible for different visualization, imaging technologies
or other technical reasons. The manufacturer is not liable for these differences and deviations. No rights can
be obtained due to typographical errors, product descriptions or obvious errors on the website.
* Adjustable legs can vary according to product models.
Technical Table
(*) Indicates the daily ice making capacity of the product at 20 OC Ambient and 10 OC Water Inlet temperature.
The presence of particles in the water due to quality of the water source and / or contamination with dirt,
installation residue, burrs, slag and so on will adversely affect the operation of the ice maker. Such
contamination may cause inefficient operation, no ice making, loud noises, etc. Problems with the machine
due to plumbing and/or calcified water are not covered by the warranty.
Chapter 03. Installation of Ice Maker
Selection of Location for Your Product
Your product should not be in direct contact with or in close proximity to any heat
source.
You should leave at least 10 cm of distance if you place your ice maker next to
other electrical equipment (such as ovens, computers etc,) that are considered as
heat sources.
If the product is to be placed next to a wall, the distance between the back surface
of the product and the wall should not be less than 20 cm (See Figure-7).
Do not place objects in front of the ventilation filter of your ice maker that might
prevent air circulation into your product.
Do not place your product outdoors. This product is designed to be used indoors.
Electrical Connection
The voltage and frequency values of the main power supply have to be the same
as written on the product label. If you are in doubt or need assistance, please
contact the nearest Authorized Service or get help from a qualified electrician.
Make sure your power outlet has been grounded.
The amperage of the circuit breaker to which the product will be plugged in should
be 10A**. (See Technical Table / Entry fuse section.)
Do not use power strips with multi sockets or extension cords to operate your
product.
Water Use and Connection
Your ice maker is designed to make ice cubes within the most ideal time and size.
However, it is important to note that there are some things that will affect the
quality of the ice produced by the machine, as well as the health of the internal
components of the ice maker.
The Main Water Supply
Should be good for human consumption,
Should have an optimum level of hardness,
Should include minimal amount of chlorine.
The optimum water filters to be used on your product are available and can be
purchased from your Authorized Service.
Water temperature should be between 10°C and 30°C
Questo manuale è adatto per i seguenti modelli
6
Indice
