FSR IT-A25 Series Guida all'installazione
2
PROPRIETARY INFORMATION
All information in this manual is proprietary to and the
property of FSR inc. This publication is protected by the Federal
Copyright Law, with all rights reserved. No part of this document
may be reproduced, transcribed, or transmitted, in any form or by
any means, without prior explicit written permission from FSR
Inc.
Operators Safety Summary
The general safety information in this summary is for operating
personnel.
Read Instructions Read and understand all safety and operating
instructions before using this equipment. Keep the instructions
handy.
Do Not Remove Covers or Panels There are no user-serviceable
parts within the unit. Removal of the top cover will expose
dangerous voltages. To avoid personal injury, do not remove the
top cover. Do not operate the unit without the cover installed.
Power Source This product is intended to operate from the
specified wall plug-in transformer. Do not use any other power
source.
Use the Proper Power Cord Use only the power cord and
connector specified for your product. Use only a power cord that is
in good condition. Refer cord and connector changes to qualified
service personnel.
Do Not Operate in Explosive Atmospheres To avoid explosion,
do not operate this product in an explosive atmosphere.
3
INTRODUCTION
The IT-A25 Series Amplifiers are the latest addition to FSR’s
Intellitools family. They are designed to deliver great performance
and versatility at an affordable price. Perfect for small venue audio
power applications.
Both models support Pro and consumer audio input levels; The IT-
A25-M70 Mono Amp provides either a 4-8 ohm speaker output or
a 70 V line output at 25W RMS. The IT-A25 Stereo Amp delivers
a 25W output at 8 ohms and can be bridged to drive a 4 ohm load
at 50 watts.
FEATURES
• Signal Sense trigger for sleep & wake up
• Music and alarm muting capability
• Optional mounts available
• External Power Supply included
• Clean full-range power
APPLICATIONS
• Boardrooms • Houses of Worship• Control Rooms
• Classrooms• Staging and Rental •Libraries
ACCESSORIES
• RK-1 Rack mounting kit
• RK-2 Rack mounting shelf
4
INSTALLATION AND OPERATION
Mount the units as appropriate for the particular installation.
There are #6-32` tapped holes on the top and bottom of the IT-A25
series housings for mounting. Use #6-32 screws that protrude through
no longer than 1/2". There are also rack kits available from FSR for
mounting in a standard 19” rack mount. See “accessories” section for
FSR part numbers and ordering information.
FRONT PANELLED STATUS INDICATION
ON OFF STANDBY
On/Standby: Green indicates the
amplifier is active.
Amber indicates the amplifier is
powered, but in Standby mode
drawing minimal current.
CLIP
When lit this led indicates the
amplifier is approaching the onset of
clipping.
5
REAR PANEL
Mute Switch Input:
Provide a dry contact or low leakage open collector closure to
mute the amplifier. No connection, or an open circuit provides
for normal operation. The IT-A25 amplifier provides pop-free
transitions in and out of mute mode.
Audio Input:
NOTE: See Option DIP Switch table for proper settings and additional
information.
Connect a balanced or unbalanced audio source to this point.
Unbalanced signals should be connected between “Hi” and “Lo.”
For IT-A25-M70 only:
Connect mono sources to the LEFT audio input terminals
For IT-A25-S8 only:
Connect mono sources to the RIGHT or LEFT audio input terminals.
Master Gain control:
Provides a wide range volume control to adapt to audio source. CW
screwdriver or finger adjust to increase gain.
Audio Out:
For IT-A25-M70 only:
Provides a choice of either 4-8 ohm or 70 volt mono output for
flexibility in interfacing to the room speakers. Connections should be
made to only one output type in a particular installation.
For IT-A25-S8 only:
Provides connection to 4-8 ohm stereo speakers. Outputs may be
bridged (connect + to + and connect - to - When bridging, be sure to
set front panel switch 2 to “mono” mode) to double the output power.
Use 4 ohm speaker, or parallel combination of 8 ohm speaker to
achieve full power when bridging outputs.
Power Input:
Connect to supplied 24 volt external power supply.
6
OPTION DIP SWITCHES
AUTO POWER-DOWN
SWITCH 1
Down=ON=Auto Power-down function
enabled,
UP=OFF=Auto Power-down function
disabled. This switch is used to override
the Auto Power-down feature of the
amplifier and unconditionally force the
amplifier to the on state.
MONO/STEREO
SWITCH 2
Down=Stereo, Up=Mono. When in Mono
mode, the Left and Right audio inputs are
actively summed together and fed to both
the Left and Right output channels.
When in stereo mode, Left and Right
inputs are independent.
NOTE: The IT-A25-M70 mono version of
the product requires this switch to be set to
mono mode when using stereo sources.
When operating the IT-A25-S8 in bridged
output mode, this switch should also be set
to mono mode.
INPUT GAIN
SWITCH 3
Up=Professional Audio input levels,
Down=Consumer Audio input levels.
When down, this switch provides an
additional 12 dB of input boost to
accommodate the lower signal levels of
consumer electronic equipment.
When up, this switch accommodates
the higher signal levels provided by
professional AV mixers.
OUTPUT BOOST
SWITCH 4
Up= +12dB,
Down= Unity. When up, this switch
provides an additional 12 dB of gain to
provide additional flexibility.
7
AUDIO PINOUT
8
DIMENSIONS
Depth is 6.75” on both models. Allow clearance for connectors and cables.
9
TECHNICAL SPECIFICATIONS
AUDIO INPUT IT-A25-M70 IT-A25-S8
Number of Inputs 1, Stereo balanced
Connector 5 position pluggable screw terminal
Maximum Input Level 7 Vrms, +16.9dBV balanced/unbalanced
Input Impedance 20kȍbalanced/unbalanced
Input Signal Detection
Threshold
(for Auto Power Down)
10mVrms, -40dBV
AUDIO OUTPUT IT-A25-M70 IT-A25-S8
Connector 2 position pluggable screw
terminal 4 position pluggable screw
terminal
Power Output 25Wrms @ 70V
25Wrms @ 4 to 8ȍ
25Wrms x 2 @ 4 to 8ȍ
Signal Output Mono Stereo, 2 Mono, Bridgeable in
Mono mode
Load Impedance 4 to 8ȍor 70V 4 to 8ȍ
THD+Noise 0.1% @ 10KHz, 10W 70V
Output 0.5% @ 1KHz, 25W 8ȍ
Frequency Response 100Hz-20KHz, +0, -1dB;
-3dB @ 50Hz 20Hz-20kHz, +0, -1dB
Signal to Noise Ratio >97dB @ 70V,
100Hz-20Khz, un-weighted >90dB @ 25W 8ȍ,
20Hz-20KHz, Un-weighted
CONTROL ADJUSTMENTS IT-A25-M70 IT-A25-S8
Control Switch
xAuto Power Down
xStereo/Mono (L+R sum)
xPro/Consumer (+12dB)
xUnity/+12dB Gain
Remote Muting Input Dry contact closure required
Master Volume 99
FEATURES IT-A25-M70 IT-A25-S8
Auto Power Down 99
Clip Indicator 99
Output short circuit
protection 99
Bridgeable Output 9
Power up/down click and
Pop suppressor 99
10
POWER REQUIREMENTS IT-A25-M70 IT-A25-S8
External power supply 100-240VAC
100-240VAC
Power input requirement 24V DC @ 1.2A 24V DC @ 2.4A
Power Consumption@ Full
Output d28W d58W
Standby Power d1W
Idle Power d3.5W
Model Dimensions (inches) Shipping
weight
lbs.
IT-A25-M70 2.5
MECHANICAL
IT-A25-S8 6.75 x 4.22 x 1.59 1.5
GENERAL IT-A25-M70 IT-A25-S8
LED Indicators xPower On
xStandby
xClip Indicator
Operating Temperature 0° C to 40° C
Cooling Convection cooled
Enclosure Material Metal
Turn on time from Auto
Power Down (typical) 25ms
Time to enter Mute state
(typical) <1ms
Time to exit Mute state
(typical) 30ms
Amplifier Class D
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali FSR Amplificatore
