FSR HuddleVU Guida all'installazione

HuddleVU Collaboration

System

INSTALLATION AND OPERATING GUIDE

43039 LIT1455

Huddle-VU

COMPLIANCE AND SAFETY

PROPRIETARY INFORMATION

All information in this manual is proprietary to and the property of FSR Inc. This publication is protected

scribed, or transmitted, in any form or by any means, without prior explicit written permission from FSR Inc.

OPERATOR’S SAFETY SUMMARY

The general safety information in this summary is for operating personnel.

Read Instructions. Read and understand all safety and operating instructions before using this equipment.

Keep the instructions handy.

Removal of the top cover may expose dangerous voltages. To avoid personal injury, disconnect all power

sources before removing the top cover. Do not operate the unit with the cover removed.

Power Source:

This product is intended to operate from the power source detailed in the speciﬁcation section of this manual.

Do not use any other power source or exceed voltage limits.

Grounding the Product:

This product is grounded through the grounding conductor of the power cord. To avoid electrical shock, plug

the power cord into a properly wired receptacle before connecting to the product input or output terminals.

Use the Proper Power Cord. Use only the power cord and connector speciﬁed for your product. Use only a

power cord that is in good condition. Refer cord and connector changes to qualiﬁed service personnel.

3Huddle-VU

TABLE OF CONTENTS

COMPLIANCE AND SAFETY.............................................................................................................2

PROPRIETARY INFORMATION.............................................................................................................................2

OPERATOR’S SAFETY SUMMARY.......................................................................................................................2

INTRODUCTION...................................................................................................................................5

FEATURES:................................................................................................................................................................5

APPLICATIONS:........................................................................................................................................................5

HV-T3 TABLE BOX INSTALLATION.....................................................................................................................6

MOUNTING INFORMATION.............................................................................................................6

HV-T6 TABLE BOX INSTALLATION.....................................................................................................................7

HUDDLEVU BRACKET SET INSTALLATION.....................................................................................................8

HUDDLEVU BRACKET SET CABLING FOR A FIVE HV-T3 INSTALLATION ............................................13

HUDDLEVU BRACKET SET CABLING FOR AN HV-T6 INSTALLATION ....................................................13

MECHANICAL DIMENSIONS..........................................................................................................14

HV-T3 TABLE BOX................................................................................................................................................. 14

HV-T6 TABLE BOX.................................................................................................................................................15

DV-HSW-41 4X1 SWITCHER.................................................................................................................................16

HV-CTL CONTROL BOX ......................................................................................................................................16

DV-PC2HD ANALOG PC TO HDMI CONVERTER (OPTION)..........................................................................17

IT-SACWP SWITCHED WALL PLATE (OPTION)...............................................................................................18

OPERATION.........................................................................................................................................19

HV-1000 4-PERSON SYSTEM DIAGRAM ......................................................................................20

MULTI-PERSON SYSTEM DIAGRAM ...........................................................................................21

HV-CTL HUDDLEVU CONTROLLER............................................................................................22

DV-HSW-41 HDMI SWITCHER........................................................................................................23

DV-PC2HDANALOG PC TO HDMI CONVERTER ......................................................................24

IT-SACWP SWITCHED WALL PLATE............................................................................................25

RS-232 PROTOCOL............................................................................................................................26

HUDDLEVU BEHAVIOR .......................................................................................................................................26

LOCKING/UNLOCKING SWITCH INPUTS .......................................................................................................26

POWERING THE MONITOR ON/OFF SERIALLY..............................................................................................27

Huddle-VU

HUDDLE VU SERIAL COMMANDS ................................................................................................................................28

HV-CTL REQUEST LIST QUICK REFERENCE..........................................................................................................28

REQUEST/RESPONSE FORMAT..................................................................................................................................29

COMMAND REQUEST SYNTAX:................................................................................................................................29

COMMAND REQUEST COMMENT FIELDS..............................................................................................................29

ACKNOWLEDGING RECEIPT OF COMMANDS.......................................................................................................30

ERROR RESPONSE.........................................................................................................................................................30

CONNECTION REQUEST .............................................................................................................................................31

HELP REQUEST..............................................................................................................................................................32

LOCK REQUEST.............................................................................................................................................................34

POWER REQUEST..........................................................................................................................................................35

RELAY REQUEST...........................................................................................................................................................36

RESPONSE REQUEST....................................................................................................................................................37

SERIAL BIT RATE REQUEST.......................................................................................................................................38

STATUS REQUEST.........................................................................................................................................................39

UNLOCK REQUEST.......................................................................................................................................................40

VERSION REQUEST ......................................................................................................................................................41

VERBOSE REQUEST .....................................................................................................................................................42

DV-HSW-41 PINOUTS AND CABLING ......................................................................................................43

DB-9 CONNECTION............................................................................................................................................................43

SPECIFICATIONS..........................................................................................................................................45

HV-CTL .................................................................................................................................................................................45

DV-HSW-41............................................................................................................................................................................45

DV-PC2HD ............................................................................................................................................................................45

IT-SACWP..............................................................................................................................................................................46

WARRANTYAND RETURN INFO..............................................................................................................47

WARRANTY POLICY .........................................................................................................................................................47

SERVICE AND RETURN AUTHORIZATION ..................................................................................................................47

CONTACT INFORMATION ................................................................................................................................................47

5Huddle-VU

INTRODUCTION

The HuddleVU system allows for multiple users to share and view their laptops, tablets, and smart phones

screens on a main display. Unlike conventional presentation systems, anyone participating can lead the

presentation at any given time at the push of a button. LED’s indicate which user is currently live and when

the system is busy.

HuddleVU creates the ideal environment for people to view and share ideas. The systems include all the

necessary video switching equipment, control hardware, display power control and color-coded captive HDMI

cables. It is a very simple yet effective system to quickly install and use.

There are two model styles available:

The HV-1000 single table box system employs a single FSR HV-T6 table box that allows 1 to

4 users to plug in and power their laptops or other input devices and simply push a button to

display their desktop information on the main display. Any user can switch to their own laptops,

tablets, and smartphones at any time simply by pushing their button on the T6 housing.

The individual HV systems accommodate from 3 to 7 users depending on the model. Each user

has their own FSR HV-T3 table box to plug into. Each table box contains a pullout HDMI cable

and an AC outlet. A single push of a button on each T3 is all that is needed to display the laptop

or iPad’s desktop information onto the main display. An HV-CTL Controller and up to two DV-

HSW-41 HDMI Switchers are included on all systems. The HV-CTL has a power switch, two

AC outlets to power the DV-HSW-41 HDMI Switchers and an additional AC outlet to power the

main display. The HV-CTL is the main termination point for the system components. When

four or less inputs are used the HV-CTL switching can be serially controlled by an external

control system.

FEATURES:

• Single button press user selection

• No software or programming required

• Simple installation

• Create attractive workspaces

• Hardware and cables included

• Conversion kits available for VGA and audio input

• Systems with four or less inputs can be controlled by an external control system

APPLICATIONS:

• Classrooms

• Libraries

• Conference Rooms

• Educational Facilities

• Corporate Teleconference Rooms

• Learning Centers

• Training Rooms

Huddle-VU

MOUNTING INFORMATION

HV-T3 INSTALLATION INSTRUCTIONS

SLOTS USED FOR 5/8" TO

1-1/8" THICK TABLE TOPS

SLOTS USED FOR 1-1/8" TO

1-9/16" THICK TABLE TOPS

3.50" DIAMETER

(2) MOUNTING

CLAMP

(2) MOUNTING

SCREW

MOUNTING

CLAMP AND

MOUNTING

SCREW

INSTALLED MOUNTING

CLAMP AND

MOUNTING

SCREW

(SEE BELOW)

HV-T3 ASSEMBLY

TABLE

DRILL 3.50" DIAMETER HOLE IN TABLE TOP.

2. INSERT HV-T3 ASSEMBLY AND ORIENT AS REQUIRED.

3. INSTALL MOUNTING CLAMPS TO ASSEMBLY AND SECURE TO TABLE BY

SCREWING MOUNTING SCREWS TO UNDERSIDE OF TABLE.

MAKE ELECTRICAL CONNECTIONS AS REQUIRED. ENSURE HDMI

CONNECTOR CAN BE PULLED OUT 3'-0".

4. CUSTOMER TO PROVIDE

KO SLUG/PENNY/OTHER

HARD FLAT PIECE FOR

SCREW END, WITH SOFT

TABLE WOOD

HV-T3 TABLE BOX INSTALLATION

NOTE: TABLE BOXES ARE AUTOMATICALLY

GROUNDED WHEN THAY ARE PLUGGED INTO AN

AC OUTLET. IF THE UNITS ARE NOT PLUGGED

INTO AN AC OUTLET THEY MUST BE MANUALLY

GROUNDED.

7Huddle-VU

ASSEMBLED VIEW

UNDERSIDE VIEW OF SHROUD

HV-T6 SUB-ASS'Y

INSTALL DESIRED BRACKETS INTO THE

'HV-T6' SUB-ASS'Y. DROP THE SUB-ASS'Y

INTO THE HOLE IN THE TABLE

(COVER ORIENTATION IS PRE-SET

BY THE SHROUD INSTALLATION).

INSTALL CLAMP SHROUD TO UNDERSIDE

OF TABLE HOLE WITH (5) WOOD SCREWS

AS SHOWN. ORIENT PER DESIRED

COVER SWING DIRECTION.

PASS THE DESIRED-LENGTH (2) LONG

SCREWS THRU THE SH ROUD AND THREAD

INTO THE SUB-ASS'Y. TURN THE 3/8"-LONG

CLAMP NUTS UP SNUG AGAINST THE

SHROUD BASEPLATE TO PULL THE

SUB-ASS'Y DOWN COMPLETELY INTO

PLACE IN THE PRE-CUT 6.00" DIA. HOLE.

MAKE ELECTRICAL CONNECTIONS AS

REQUIRED AND TIE-WRAP CABLES TO

TIE-TABS. ENSURE HDMI CONNECTORS IN

THE SUB-ASS'Y CAN BE PULLED OUT 3'-0"

PRIOR TO SECURING CABLES TO TIE TABS.

HV-T6 INSTALLATION

INSTRUCTIONS

(5) #6 / #8

MOUNTING

SCREW

HOLES

6.00" DIA. THRU

HOLE IN TABLE

PRE-CUT 6.00" DIA.

HOLE IN TABLE

3/4" MIN. - 2-1/4" MAX.

TABLE THICKNESS

(7) CABLE

TIE TAB

(5) #6 / #8 x 1/2"

WOOD SCREW

(2) #6-32 x 2.00" or 2-1/2" or 3" LONG

PAN HEAD SCREW

(2) 3/8"-LONG

CLAMP NUTS

3.50

7.00

3.38

9.00

2.75

5.50

2.75

5.50 7.00

HV-T6 TABLE BOX INSTALLATION

NOTE: TABLE BOXES ARE AUTOMATICALLY

GROUNDED WHEN THAY ARE PLUGGED INTO AN

AC OUTLET. IF THE UNITS ARE NOT PLUGGED

INTO AN AC OUTLET THEY MUST BE MANUALLY

GROUNDED.

Huddle-VU

1. LOOSEN BASE PLATE SCREWS AND SEPARATE

BASE PLATE FROM TABLE BRACKET. DETERMINE

EQUIPMENT LOCATION AND MOUNT TABLE

BRACKET TO UNDERSIDE OF TABLE WITH

SUPPLIED #8 WOOD SCREWS OR CUSTOMER

SUPPLIED #8 COUNTER-SUNK HARDWARE.

TABLE BRACKET

(4) #8 COUNTER-SUNK HARDWARE

2. REMOVE AND DISCARD EXISTING SCREWS FROM

HV-CTL UNIT. 3. INSTALL HV-CTL TO BASE PLATE WITH SUPPLIED

#6 HARDWARE.

HV-CTL

REMOVE AND DISCARD

BASE PLATE

TABLE

(4) #6-32 x 3/8" LONG

HUDDLEVU BRACKET SET INSTALLATION

9Huddle-VU

a. INSTALL DV-HSW-41 TO BASE PLATE WITH SUPPLIED

M3 HARDWARE.

4A. INSTALLING ONE DV-HSW-41 UNIT:

DV-HSW-41

(4) M3 x 8mm LONG

PAN-HEAD SCREW

4B. INSTALLING TWO DV-HSW-41 UNITS:

REMOVE DV-HSW-41 SIDE BRACKET AND REINSTALL

TO NEW POSITION ONTO BASE PLATE.

SIDE BRACKET

b. INSTALL DV-HSW-41 MOUNTING/SUPPORT BRACKET

TO BASE PLATE WITH SUPPLIED #6 HARDWARE.

MOUNTING/

SUPPORT

BRACKET

(2) #6-32 x 3/8" LONG

PAN-HEAD SCREW

c. INSTALL DV-HSW-41 TO BASE PLATE WITH SUPPLIED

M3 HARDWARE.

(8) M3 x 8mm LONG

PAN-HEAD SCREW

(2) DV-HSW-41

OMIT THESE SCREWS FOR

EASE OF FIELD SERVICE

OMIT THIS SCREW FOR

EASE OF FIELD SERVICE

Huddle-VU

5A. INSTALLING ONE DV-PC2HD UNIT:

a. INSTALL MOUNTING BRACKET TO DV-PC2HD WITH #6

HARDWARE (MOUNTING BRACKET AND #6 HARDWARE

SUPPLIED WITH DV-PC2HD).

MOUNTING BRACKET

SUPPLIED WITH DV-PC2HD

#6-32 x 1/4" LONG

PAN-HEAD SCREW

SUPPLIED WITH

DV-PC2HD

(2) #6-32 x 3/8" LONG

PAN-HEAD SCREW

b. INSTALL DV-PC2HD WITH ATTACHED MOUNTING

BRACKET TO BASE PLATE WITH SUPPLIED #6 HARDWARE

AND #6 HARDWARE SUPPLIED WITH DV-PC2HD.

#6-32 x 1/4" LONG

PAN-HEAD SCREW

SUPPLIED WITH

DV-PC2HD

5B. INSTALLING TWO DV-PC2HD UNITS:

a. REMOVE DV-PC2HD SIDE BRACKET. INSTALL MOUNTING

BRACKET TO DV-PC2HD WITH #6 HARDWARE (MOUNTING

BRACKET AND #6 HARDWARE SUPPLIED WITH DV-PC2HD).

INSTALL DV-PC2HD WITH ATTACHED MOUNTING BRACKET

TO BASE PLATE WITH SUPPLIED #6 HARDWARE.

b. REINSTALL SIDE BRACKET TO BASE PLATE AND

SECURE DV-PC2HD WITH #6 HARDWARE SUPPLIED

WITH DV-PC2HD.

(2) DV-PC2HD

(2) #6-32 x 3/8" LONG

PAN-HEAD SCREW

(2) MOUNTING BRACKET

SUPPLIED WITH DV-PC2HD

(2) #6-32 x 1/4" LONG

PAN-HEAD SCREW

SUPPLIED WITH

DV-PC2HD

REINSTALL SIDE BRACKET

(2) #6-32 x 1/4" LONG

PAN-HEAD SCREW

SUPPLIED WITH

DV-PC2HD

REMOVE

SIDE BRACKET

Indice

Altri manuali FSR Sistema di conferenza

FSR

FSR ML-400 Manuale utente

Manuali Sistema di conferenza popolari di altre marche

Kramer

Kramer VIA GO Manuale utente

AVT

AVT MAGIC AC1 Go Manuale utente

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuale utente

Sony

Sony PCS-I150 Manuale utente

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuale utente

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guida

Speakerbus

Speakerbus iD 712 Manuale utente

Trelleborg

Trelleborg SafePilot CAT PRO Manuale utente

Sennheiser

Sennheiser ADN Manuale utente

ADTRAN

ADTRAN NetVanta 7100 Manuale utente

AINA

AINA PTT Voice Responder Manuale utente

Yamaha

Yamaha ProjectPhone PJP-100H Manuale utente

vissonic

vissonic VLI Series Manuale utente

Panasonic

Panasonic KX-VC500 Manuale utente

Poly

Poly Trio 8300 Manuale utente

Crestron

Crestron Mercury CCS-UCA-SMK Disegno dimensionale

Inmarsat

Inmarsat mini M Manuale utente

Tenveo

Tenveo ALL-IN-ONE Manuale utente