FujiFilm DPC-R1 Manuale utente
User's Guide
This manual will show you how to use your IMAGE MEMORY CARD READER DPC-R1
correctly. Please follow the instructions carefully.
IMAGE MEMORY CARD READER
DPC-R1
for Windows / Macintosh
2
IMPORTANT
To customer _____ Please read the following before using your DPC-R1.
In rare cases the DPC-R1 may not be compatible, depending on the personal
computer used.
■To open an image
To display an image on your personal computer, JPEG image reading software
is required.
■Trademark Information
●Microsoft and Windows are registered trademarks of the Microsoft
Corporation of the U.S. registered in the USA and other countries.
Windows is an abbreviated term referring to the Microsoft Windows
Operating System.
●IBM PC/AT is a registered trademark of International Business Machines
Corp. of the USA.
●Macintosh, iMac, iBook, PowerMacintosh, PowerBook, MacOS are
trademarks of Apple Computer, Inc.
●SmartMedia is a trademark of Toshiba Corporation.
●Other company or product names are trademarks or registered trademarks of
the respective companies.
■Notes on Electrical Interference
Usage of the DPC-R1 in an aircraft or hospital may cause erroneous operations
of the aircraft and hospital control devices, make sure of the regulations of
hospitals or aircraft.
Software and User's Guide precautions
(1) No part of the software and owner’s manual may be reproduced without
prior permission.
(2) The software and owner’s manual can be used with one Image Memory
Card Reader DPC-R1.
(3) Fuji Photo Film Co., Ltd. shall not be liable for any losses incurred by the
customer or other parties by use of the DPC-R1 according to the accessory
software and owner’s manual.
(4) The DPC-R1 has been carefully inspected, however, if the product is found
to be defective due to faulty materials or workmanship the product will be
replaced. No other warranty is implied.
(5) The contents of the software and User's Guide are subject to change
without prior notice.
3
NOTES ON USING YOUR DPC-R1 CORRECTLY
●Do not turn off the personal computer power, while the “READY/ACCESS lamp” is on
or blink.
The xD-Picture Card, SmartMedia Card and internal data will be destroyed.
●Do not drop or otherwise apply strong shock or vibration to the DPC-R1.
Strong shock or vibration will damage the DPC-R1 or cause trouble.
●Do not store, or use, the DPC-R1 with heavy objects atop it.
Heavy objects will damage the DPC-R1, or cause trouble.
●Do not touch the pins of the USB connector.
Touching the pins may damage the DPC-R1 and the personal computer.
●When disconnecting the USB interface cable, pull out the connector while pressing
the end with your finger.
Forcefully pulling out the cable itself will damage the DPC-R1 and the cable.
●Do not use cable other than the cable supplied.
The use of other cable will cause erroneous operation.
●When inserting the xD-Picture Card or SmartMedia Card, pay careful attention to the
direction of the card. Inserting the xD-Picture Card or SmartMedia Card in reverse
may cause trouble.
●The DPC-R1 does not support 2MB SmartMedia. Note also that when a 2MB
SmartMedia and an xD-Picture Card are loaded at the same time, the xD-Picture
Card cannot be accessed after the SmartMedia has been accessed. Open the cover
and remove the 2MB SmartMedia.
4
IMPORTANT ................................................................2
NOTES ON USING YOUR DPC-R1 CORRECTLY...........3
BEFORE USING...........................................................5
Data storage ..................................................................................5
HANDLING...................................................................6
USB cable connection ...................................................................6
Inserting the xD-Picture Card or SmartMedia .............................10
Removing the xD-Picture Card and SmartMedia Card ................11
Disconnecting the USB cable ......................................................12
Using with Windows....................................................14
Hardware and software requirements .........................................14
Setup Procedure in Windows ......................................................15
Using the DPC-R1 .......................................................................18
Using with a Macintosh ...............................................19
Hardware and software requirements ....................................19
Set up procedure.....................................................................20
Hardware and software requirements ....................................22
Set up procedure ....................................................................22
Using the DPC-R1 .......................................................................27
File Exchange (Mac OS 8.6 to 9.2 users) ....................................28
TROUBLE SHOOTING ................................................29
MAIN SPECIFICATIONS .............................................30
UNINSTALLING THE SOFTWARE ...............................31
Windows ......................................................................................31
Macintosh ....................................................................................35
Mac OS X
Mac OS 8.6 to 9.2
Macintosh
Windows
CONTENTS
5
Data storage
The data stored in the xD-Picture Card or SmartMedia Card may be destroyed in the
following cases. Fuji Photo Film Co., Ltd. shall not be liable for destruction of the stored
data.
1. When the customer, or other party, used the xD-Picture Card, SmartMedia Card and
DPC-R1 improperly.
2. When the USB cable or xD-Picture Card or SmartMedia Card were removed and
when the device power was turned off while the DPC-R1 was being accessed (data
communication).
We recommend that you copy your valuable data to another media (MO disk, CD-R,
hard disk, etc.).
BEFORE USING
6
HANDLING
PC
The accessory rubber feet are designed to prevent slipping. Install these feet at the four
corners of the DPC-R1, as required.
✽Install the software before connecting the USB cable to your computer.
USB cable connection
Connect the DPC-R1 directly to the USB port on the personal computer base unit as
shown below.
•Insert the USB cable fully and firmly. Improper connection will cause the DPC-R1 to
malfunction.
•The DPC-R1 can be connected and disconnected even while the personal computer
power is on.
•When there are two or more USB connectors, the DPC-R1 can be connected to any
port.
•If connected through a USB hub, depending on the type of hub, the DPC-R1 may
malfunction. In this case, connect the DPC-R1 directly to the personal computer.
NOTE
USB cable
(DPC-R1 accessory)
Personal computer
DPC-R1
xD-Picture Card SmartMedia
IBM PC/AT compatible, Macintosh
(1) When you first connect the DPC-R1 to your computer, the "Found
New Hardware Wizard" window appears. Click the [Next] button.
(2) The search window shown below appears.
Windows XP
7
8
(3) A warning message such as the one shown below may appear. If so,
click the [Continue Anyway] button.
Note that clicking the [STOP installation] button requires you to redo the installation
from the beginning.
(4) The software installation window appears.
NOTE
Tests are being performed to ensure that there are no problems
with DPC-R1 Driver operation.
9
(5) When the "Installation completed" window appears, click the
[Finish] button.
10
Inserting the xD-Picture Card or SmartMedia
When inserting a xD-Picture Card or SmartMedia, insert them into the xD-Picture Card
slot or SmartMedia slot respectively, as indicated in the figures below.
✽Insert the SmartMedia with the contact area (gold colored area) facing upwards.
Push the rear edge of the SmartMedia firmly with your fingertip until the SmartMedia is
fully inserted. When SmartMedia is inserted correctly and the cover is closed, the
READY / ACSESS lamp will be lit. The same READY / ACSESS lamp is used for both
the xD-Picture Card slot and the SmartMedia slot.
NOTE
SmartMedia slot
Cover
READY / ACSESS
lamp (green)
SmartMedia
✽ Insert the xD-Picture Card with the contact area (gold colored area) facing downwards.
Push the xD-Picture Card slowly but firmly all the way into the slot with your fingertip.
When the xD-Picture Card is inserted correctly and the cover is closed, the READY /
ACSESS lamp will be lit. The same READY / ACSESS lamp is used for both the xD-
Picture Card slot and the SmartMedia slot.
NOTE
xD-Picture Card slot
Cover
READY / ACSESS
lamp (green)
xD-Picture Card
Indice
Altri manuali FujiFilm Lettore di schede
