Fujisoft +F FS020U Manuale utente
FS020U
USB MODEM
User Manual
2
Table of Contents
User Manual.................................................................................1
1 Introduction ..............................................................................3
2 Description for Client Interface ...............................................4
Activate Client ......................................................................4
Introduction to Interface........................................................5
3 Connection ...............................................................................7
Automatically connect to the network ...................................7
Customized Network Connection .........................................7
4 Setting.......................................................................................9
Connection...........................................................................9
PIN Management .................................................................9
Language Setting...............................................................10
Network Connection...........................................................10
Diagnostics ........................................................................10
5 Network recording.................................................................. 11
Network recording .............................................................. 11
6 FAQ ......................................................................................... 11
3
1 Introduction
The product is designed to enable PC users access to the Internet via
GPRS/EDGE/UMTS/HSPA/LTE networks. It uses a standard USB
interface for a fast simple connection to your PC.
The modem’s firmware includes the following features:
Wireless Internet connection
Setting
Network recording
4
2 Description for Client Interface
Activate Client
To activate client, please double-click the shortcut icon of client on the
desktop.
Note:
Operational Instruction for PIN: If the user activates PIN under the
setting menu, it shall be required to input the correct PIN while
using the application procedure (totally 3 times to input PIN, if the
number is wrongly-input after 3 times, thus, PUK should be used
to decode the PIN, and the input of PUK is only 10 times, if the
number is wrongly-input after 10 times, (U)SIM will be locked or
damaged, Please contact the local operator for settlement).
(U)SIM is provided by the network operator. Please contact the
operator for more information.
5
Introduction to Interface
1. Function Icon
The definition of function icon provided by client is as follows:
Shortcut icon
Description
Connection
Setting
Network recording
2. Status Information
The status information displayed by client is as follows:
Status
Information
Description
Network signal
/ / Indicates the signal strength of
the current connected network
Network types
Displays when supporting LTE
Displays when supporting EDGE
Displays when supporting HSPA
Displays when supporting GSM (GPRS)
Displays when supporting UMTS
Displays when supporting LTE
Display “No device” when the device can’t be
6
Device and
Network
information
found.
Display “No (U)SIM ” when the (U)SIM can’t
be found.
Display “Invalid” when the (U)SIM is invalid.
Display “Searching” when searching the
network.
Display “No service” when the network can’t
be found.
Display the name of network operator after
successful network registration.
Network
connection
status
Indicates network has been
connected.
Indicates network hasn’t been
connected.
3. Tray Icon
Click on to close the main window, The main window can be
reopened by double clicking on the tray icon.
The icon context menu in the tray area:
Open: open the main window.
About: display the information of software version.
Exit: exit from the application software.
7
3 Connection
Auto-connection and customized-connection modes are provided to
access to the network.
Automatically connect to the network
If using the default connection configuration, you should connect by
dialing according to the default connection profiles.
1. Connect
Select connection mode: click on <Connect> for auto connection.
After the completion of connection, under the window status
bar will turn into .
2. Disconnect
Click on <Disconnect> to disconnect the connection.
Customized Network Connection
Click on under the main windows, select <Connection setting> to
set up customized-connection.
1. New
Input the value of various parameters in the <New> area box, and the
profiles file is added into the connection profile list.
8
Note: Please contact the network operator for profile information.
2. Predefined List
Select a profile in the predefined list and then add it into the connection
profile list.
3. Edit
Select one profile in the available list and then to edit.
4. Delete
Select one profile in the available list and then to delete it.
5. Set default
Select one item from the list of available connection profile(s).
Click on <Set Default> to set default;
Enter into the connection interface to establish corresponding
connection.
9
4 Setting
Connection
Click on <Connection > to display available connection profile.
1. Sound
Enabled/Disable sound prompts when Internet connection or
disconnecting.
2. Connection Setting
Please refer to “Connection”. For customized-connection network
information
PIN Management
1. Enabled PIN
Click on <Enabled PIN> to select Enable/Disable and activate
PIN launching or close dialog box;
Input the correct PIN;
Click on <Ok> to prompt the launching or closing PIN.
2. Modify PIN
Click on <Modify PIN> to enter into the PIN modification window
Input the original PIN;
10
Input new PIN and re-input for confirmation, and click on <Ok>.
Note:
It can be allowed only the PIN enabled.
Language Setting
Click on <Language setting> to select language, and the window will
display the selected language when restart the client.
Network Connection
Network Mode
Click on <Network Mode>to select, network mode defaulted is
auto;
Click on <Auto>/< 1x only >/< 3G only > to relevant network
mode.
Diagnostics
Click on < Diagnostics > to launch the window of diagnosis information.
Click on <Export> to export this information which will be saved as*.txt
file.
Indice
