Fujitsu ESPRIMO Q5020 Manuale utente
Title:
Service Manual ESPRIMO Q5020
Target Audience: FTS Support and Service Partner
Organizations
Published by:
Fujitsu
Service and Support Center
Product Service Management Business PC
Joerg Reichelt Service Manual ESPRIMO Q5020 V1.0.doc
Version: Page/Pages:http://extranet.ts.fujitsu.com/service/ Fujitsu Technology Solutions GmbH
2008
1.0 1 of 13
Fujitsu Limited endeavours to ensure that the information in this document is correct and fairly stated, but does not accept liability
for any error or omission. The development of products and services of Fujitsu Limited is continuous and published information
may not be up to date. It is important to check the current position with Fujitsu Limited.
Service Manual
ESPRIMO Q5020
Mini PC
CONTENT
1. GENERAL 2
1.1. Version control 2
1.2. Hardware 2
1.3. ESD Handling 3
1.4. Safety Notes 3
2. HOUSING DISASSEMBLY 4
3. CPU DISASSEMBLY &
ASSEMBLY 6
4. DRIVES DISASSEMBLY
& ASSEMBLY 7
5. BLUETOOTH
7
6. MEMORY
7
7. WLAN
7
8.
FRONT USB-, BLUETOOTH-, ON-OFF-SWITCH CONNECTORS 7
9. CLOSING OF THE CABINET 7
10. SPARE PART LIST 7
Service Manual ESPRIMO Q5020 page 2 of 13
Title:
Service Manual ESPRIMO Q5020
Target Audience: FTS Support and Service Partner
Organizations
Published by:
Fujitsu
Service and Support Center
Product Service Management Business PC
Joerg Reichelt Service Manual ESPRIMO Q5020 V1.0.doc
Version: Page/Pages:http://extranet.ts.fujitsu.com/service/ Fujitsu Technology Solutions GmbH
2008
1.0 2 of 13
1. GENERAL
1.1. Version control
Note:
The information contained in this Service Manual is the best available at the time this documents has been
released and may be subject to change without prior notice. The latest version of the Service Manual can
be found at:
http://extranet.ts.fujitsu.com/service/information/professionalpc/RepairInformation
Documents History
document name version date changes
Service Manual ESPRIMO
Q5020 V1.0.doc 1.0 Jan. 28. 2008 Initial Document
1.2. Hardware
S26361-K1001-V411 ESPRIMO Q5020
Service Manual ESPRIMO Q5020 page 3 of 13
Title:
Service Manual ESPRIMO Q5020
Target Audience: FTS Support and Service Partner
Organizations
Published by:
Fujitsu
Service and Support Center
Product Service Management Business PC
Joerg Reichelt Service Manual ESPRIMO Q5020 V1.0.doc
Version: Page/Pages:http://extranet.ts.fujitsu.com/service/ Fujitsu Technology Solutions GmbH
2008
1.0 3 of 13
1.3.
ESD Handling
Notes on installing and removing boards and components
Before removing any individual modules, always switch the unit off first and disconnect it from the
mains supply.
The workplace must be designed in accordance with the guidelines of the European Federation of
Trade Unions.
Only professional quality tools must be used.
●
Switch the unit off and pull the power plug out of the mains socket.
● Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.
Boards with electrostatic sensitive devices (ESD) are marked with the label shown.
When you handle boards fitted with ESDs, you must, under all circumstances, observe the following points:
● You must statically discharge yourself before working with boards (e.g. by touching a grounded object).
● The equipment and tools you use must be free of static charges.
● Remove the power plug from the mains supply before inserting or removing boards containing ESDs.
● Always hold boards with ESDs by their edges.
● Never touch pins or conductors on boards fitted with ESDs.
1.4. Safety Notes
Lithium Battery
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS BELOW.
The lithium battery may be replaced only with an identical battery or with a type recommended by
the manufacturer.
Do not throw lithium batteries into the household waste. They must be disposed of in accordance
with local regulations concerning special waste.
Make sure that you insert the battery the right way round: The plus pole must be on the top!
Service Manual ESPRIMO Q5020 page 4 of 13
Title:
Service Manual ESPRIMO Q5020
Target Audience: FTS Support and Service Partner
Organizations
Published by:
Fujitsu
Service and Support Center
Product Service Management Business PC
Joerg Reichelt Service Manual ESPRIMO Q5020 V1.0.doc
Version: Page/Pages:http://extranet.ts.fujitsu.com/service/ Fujitsu Technology Solutions GmbH
2008
1.0 4 of 13
2. Housing disassembly
•Carefully lift the four corners of
the rubber mat and remove the
screws beneath (position see red
arrows).
•Tightly grip the unit as shown in
the picture.
Service Manual ESPRIMO Q5020 page 5 of 13
Title:
Service Manual ESPRIMO Q5020
Target Audience: FTS Support and Service Partner
Organizations
Published by:
Fujitsu
Service and Support Center
Product Service Management Business PC
Joerg Reichelt Service Manual ESPRIMO Q5020 V1.0.doc
Version: Page/Pages:http://extranet.ts.fujitsu.com/service/ Fujitsu Technology Solutions GmbH
2008
1.0 5 of 13
•Pull the top cover module and the
base unit apart as shown in the
picture.
•Don’t care about a grinding noise that
will be heard when opening the case.
•Carefully lay
down the two
modules in front
of you (the pic-
ture shows
ESPRIMO
Q5010).
Service Manual ESPRIMO Q5020 page 6 of 13
Title:
Service Manual ESPRIMO Q5020
Target Audience: FTS Support and Service Partner
Organizations
Published by:
Fujitsu
Service and Support Center
Product Service Management Business PC
Joerg Reichelt Service Manual ESPRIMO Q5020 V1.0.doc
Version: Page/Pages:http://extranet.ts.fujitsu.com/service/ Fujitsu Technology Solutions GmbH
2008
1.0 6 of 13
3. CPU disassembly & assembly
•Remove heat sink: Unscrew 6 screws
(red arrows).
•If a tape is stuck on both middle holes,
then remove it.
•Do not unplug the fan unless you want
to change the fan
•Place the heat sink beside the unit.
•Release the CPU-socket with a left-
turn (anti clockwise) of the screw.
•Remove defect CPU. While inserting
the new CPU ensure that the triangular
symbol is in the position as shown in the
picture.
•Lock the CPU-socket with a right-turn
(clockwise) of the screw.
lock
release
Service Manual ESPRIMO Q5020 page 7 of 13
Title:
Service Manual ESPRIMO Q5020
Target Audience: FTS Support and Service Partner
Organizations
Published by:
Fujitsu
Service and Support Center
Product Service Management Business PC
Joerg Reichelt Service Manual ESPRIMO Q5020 V1.0.doc
Version: Page/Pages:http://extranet.ts.fujitsu.com/service/ Fujitsu Technology Solutions GmbH
2008
1.0 7 of 13
.
•No thermal grease is used for
this heat sink.
•Lock screws in the sequence
marked in the picture.
•If tape was applied then use this
tape to close the middle holes.
•Place the fan cable between heat
sink and screw.
•Check that the cable is plugged
in (red circle).
4. Drives disassembly & assembly
•Unscrew the 4 screws
(red arrows).
•If an (optional) Bluetooth-module
is mounted then carefully remove
the cable out of the plastics clip.
•Lift the drive cage a little (1.) then
remove the drive cage in the
direction of the yellow arrow (2.).
•Carefully remove unplug the an-
tenna cable from the bluetooth
module.
1
2
3
4
5
6
1.
2.
Service Manual ESPRIMO Q5020 page 8 of 13
Title:
Service Manual ESPRIMO Q5020
Target Audience: FTS Support and Service Partner
Organizations
Published by:
Fujitsu
Service and Support Center
Product Service Management Business PC
Joerg Reichelt Service Manual ESPRIMO Q5020 V1.0.doc
Version: Page/Pages:http://extranet.ts.fujitsu.com/service/ Fujitsu Technology Solutions GmbH
2008
1.0 8 of 13
5. Bluetooth
•The optional Bluetooth module is
mounted at the edge of the drive cage.
To remove unscrew the screw.
6. Memory
•Carefully release the
memory modules at the
position and in the direction
of the red arrows.
•Insert the new modules and
slightly press it down until
the locks snap in.
Service Manual ESPRIMO Q5020 page 9 of 13
Title:
Service Manual ESPRIMO Q5020
Target Audience: FTS Support and Service Partner
Organizations
Published by:
Fujitsu
Service and Support Center
Product Service Management Business PC
Joerg Reichelt Service Manual ESPRIMO Q5020 V1.0.doc
Version: Page/Pages:http://extranet.ts.fujitsu.com/service/ Fujitsu Technology Solutions GmbH
2008
1.0 9 of 13
7. WLAN
•Antenna wire of the WLAN
module has to be placed as
seen in the picture
•Disconnect the antenna wire.
•Release screw at the
position of the red arrow.
•Carefully pull the module in
the direction of the green
arrow in order to remove it.
•Connect antenna wire at
the new module.
•Take care that the wire is
passed under the module, as
seen in the picture.
•Insert the new module and
tighten the screw.
Service Manual ESPRIMO Q5020 page 10 of 13
Title:
Service Manual ESPRIMO Q5020
Target Audience: FTS Support and Service Partner
Organizations
Published by:
Fujitsu
Service and Support Center
Product Service Management Business PC
Joerg Reichelt Service Manual ESPRIMO Q5020 V1.0.doc
Version: Page/Pages:http://extranet.ts.fujitsu.com/service/ Fujitsu Technology Solutions GmbH
2008
1.0 10 of 13
8. Front USB-, Bluetooth-, ON-OFF-switch connectors
•See the position of these connectors in the pictures.
On/Off
switch
Bluetooth
Front
USB
Indice
Altri manuali Fujitsu Scrivania
Fujitsu
Fujitsu M2361A Manuale di installazione e funzionamento
Fujitsu
Fujitsu ESPRIMO E5635 Manuale utente
Fujitsu
Fujitsu Siemens SCENIC 600 Manuale utente
Fujitsu
Fujitsu CELSIUS C620 Manuale utente
Fujitsu
Fujitsu ESPRIMO Q9000 Manuale utente
Fujitsu
Fujitsu TeamPoS 3600 Series Manuale di istruzioni
Fujitsu
Fujitsu FUTRO X913 Manuale utente
Fujitsu
Fujitsu CELSIUS M740 Manuale utente
Fujitsu
Fujitsu Supercomputer PRIMEHPC FX700 Manuale utente
Fujitsu
Fujitsu DESKPOWER 6000 Series Manuale utente
Fujitsu
Fujitsu SCENIC 800 Manuale utente
Fujitsu
Fujitsu ESPRIMO Q5 Series Manuale utente
Fujitsu
Fujitsu ESPRIMO E3520 Manuale utente
Fujitsu
Fujitsu 8000 SERIES Manuale utente
Fujitsu
Fujitsu ESPRIMO P5730 Manuale utente
Fujitsu
Fujitsu ESPRIMO D5 Series Manuale utente
Fujitsu
Fujitsu ESPRIMO E5635 Manuale utente
Fujitsu
Fujitsu ESPRIMO D70 Series Manuale utente
Fujitsu
Fujitsu DESKPOWER 6000 Seriesl DESKPOWER 6000 SD... Manuale utente
Fujitsu
Fujitsu DESKPOWER P300 Series Manuale utente
