Fujitsu 68.6 cm (27") Manuale utente

Operating Manual Displa

68.6 cm (27") wide LCD Monitor

Congratulations, you have decided to buy an

innovative Fujitsu product.

The latest information about our products, useful tips, updates etc. is available

from our website: "http://ts.fujitsu.com"

For automatic driver updates, go to: "http://support.ts.fujitsu.com/com/support/index.html"

Should you have any technical questions, please contact:

• our Hotline/Service Desk

(see Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html")

• Your sales partner

• Your sales office

We hope you really enjoy using your new Fujitsu system.

OSD-description

Operating the OSD

When putting the monitor into operation for the first time, the screen display should be optimally

adapted to the screen controller used and adjusted in accordance with your needs.

Changing the monitor settings with the buttons

of the control panel

After monitor turned on or at normal use, only the LED for the power button is illuminating (green =

ECO “ON”, blue = ECO “OFF”).

Power switch and

indicator (LED)

After pressing on the sensor key button , the other LED’s will illuminate and the description of

the sensor keys will appear at the OSD.

I I__________I__________I___________I__________I

to OSD menu Hotkeys

Hotkey – Functions

ECO mode

When user presses ECO key, ECO mode is switched on and off, depending of its previous state.

By pressing the ECO key, the brightness will be automatically adjusted to preset level, the sensor

key LED’s will illuminate in green and other controls are set as below:

•Change colour temp to 6500K (default setting )

•Change mode to office ( default setting )

•Change brightness (backlight) setting to ECO definition (defined brightness).

•Show message window "ECO on”

When OSD Brightness, colour temp or colour engine mode setting is changed from the OSD, ECO

mode is switched off and its respective status is shown under “Information”. Exception is 7500K

colour temp, which still keeps ECO mode on, if changed from 6500K CCT.

Switch ECO mode off by softkey: Change brightness to max value or to last known brightness setting

(as set before activating ECO function) and the sensor key LED’s will illuminate in blue.

OSD description

Input function definition

The OSD shows the current input source. The input source can be selected by the keys Vand U.

To apply the selected input source, press the 9key.

To discard the changes, press the 2key.

Mode function definition

The OSD shows the current mode selection. The mode can be selected with the keys for Uand V.

Example of mode selection

To apply the selected mode, press the 9key.

To discard the selection, press the 2key.

Brightness Function Definition

The OSD shows the current status of brightness. The brightness can be adjusted with the keys for “-

” and “+“.

Example of brightness adjustment

Performing auto-adjustment of the monitor

►Press the AUTO button for approx. 1 second while the OSD menu is switched off.

The Auto Processing message is displayed.

Picture quality and position are set to optimum values for your system.

OSD description

Locking the OSD menu

The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.

►Press and hold the sensor key for a few seconds while you switch on the monitor with

the ON/OFF switch.

A message is displayed that the action has been performed.

Please proceed in the same manner to release the locked OSD menu again.

Locking the ON/OFF button

The ON/OFF switch can be locked to prevent accidental or unauthorised changes to the monitor

settings.

►Press and hold both buttons ECO and Input key simultaneously for a few seconds.

A message is displayed that the action has been performed.

Please proceed in the same manner to release the locked ON/OFF switch again.

Monitor settings using the OSD menu

With the buttons on the control panel, call up and use the integrated OSD (On-Screen display) menu.

The OSD menu is available in different languages. The English menu names are used in

the following description (default setting). With the OSD function Language in the OSD Setup

you can select another language.

Language selection

After turning on the Display the first time, a language selection will appear.

XPlease select a language.

To set the OSD menu, perform the following steps:

►Press the MENU button to activate the OSD menu.

The active menu level shows a bright background and a blue coloured cursor bar. The inactive menu

level areas show the grey background.

The first symbol (Brightness/ Contrast) is blue coloured. In the right-hand part of the Display the

associated functions are shown.

►If necessary, press the 6or 5button to mark another icon (e.g. Image adjust).

OSD description

►Press the ¼button to select the blue coloured icon. The corresponding setting window (here:

Image Adjust) is displayed (on the right-hand side).

The first function (Phase) is blue coloured.

►If necessary, press the 6or 5button to mark another function.

►Press the – or + button to adjust the value for the selected function.

►Press the 9button to apply the changes and exit the function.

►Press the 2button to discard the changes and exit the function.

►If necessary, press the button 6or 5to mark another function or press the 8button to exit the

main menu.

If you want to change other settings, select the corresponding function from the OSD main menu. All

possible adjustments of the main menu are described in the following.

The OSD menu for analogue monitor operation is described in the following. During digital

operation some functions are not available, as they are not required due to the digital

transmission technology used.

Adjusting the brightness and contrast

Calling the Brightness / Contrast setting window

Brightness Setting the brightness of the display

With this function you change the brightness of the background lighting.

Contrast Setting the contrast of the display

With this function you modify the contrast of bright colour tones.

Black level Setting the brightness of the display

With this function you modify the contrast of dark colour tones.

Auto level Setting the brightness of the display

With this function you can automatically set the contrast.

Press the ¼button to activate the function.

If the contrast is set too high, bright surfaces can no longer be distinguished from very

bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.

OSD description

Adjusting the mode

Calling the Mode setting window

Office Office presets (the settings for Overdrive “OD” and Advanced Contrast Ratio “ACR”

can be adjusted)

Photo Photo presets (the settings for Overdrive “OD” and Advanced Contrast Ratio “ACR”

can be adjusted)

Video Video presets (OD: 3ms, ACR: on))

Game Game presets (OD: 3ms, ACR: on)

Adjusting image

Calling the Image adjust setting window

Phase Eliminating picture interference

With this function you fine-tune your monitor to eliminate picture interference.

Clock Setting synchronisation

With this function you adjust the picture width to eliminate vertical picture

disturbances.

H-position Adjusting the horizontal position

With this function you move the picture to the left or to the right.

V-position Adjusting the vertical position

With this function you move the picture up or down.

Sharpness Adjusting the sharpness of the picture

With this function you can modify and optimize the sharpness of the picture

Saturation Adjusting the saturation of the colours

With this function you can modify and optimize the colours of the picture

Expansion Adjust the picture size

Full screen = selection of full screen mode

Keep aspect = maximum picture size without distortion

Adjusting the volume

Calling the Audio setting window

Volume Setting the volume for playback with the integrated loudspeakers

Mute Switching the loudspeakers off or on

OSD description

Setting colour temperature and colours

Calling the Colour setting window

Selecting the colour temperature

The “warmth” of the screen colours is set using the colour temperature. The colour

temperature is measured in K (= Kelvin). You can select from sRGB, 6500 K, 7500K

9300 K, Native and Custom Color.

sRGB

Native

Custom Colour

= setting colour display according to the sRGB standard

= Original colour of the LCD display

= User-defined colours

In the user-defined setting you can change the colour ratios of the basic colours

(red, green, blue) as required.

Setting display of the OSD menu

Calling the Setup setting window

Input select Selecting VGA or DVI Input

Language Setting a language for the OSD menu

DDC-CI Activate/deactivate DDC-CI function

On = the DDC-CI function is activated (default setting)

Off = the DDC-CI function is deactivated

OSD

timeout

Setting the display duration of the OSD menu

With this function you select a value from 10 to 120 seconds.

If the set time expires without a setting being made, the OSD menu is automatically

faded out.

Factory recall Activating the factory settings

With this function all settings are reset to the factory settings without prompting for

confirmation.

Press the ¼button to activate the function. The Auto Processing message is

displayed.

Displaying information

Calling the Information setting window

With this function the model designation, serial number, resolution, H/V frequency,

signal input, mode, colour temperature, ACR mode and overdrive time are

displayed.

68.6 cm (27“) wide LCD monitor

Technical Data

Dimensions and weight (LCD Display)

Visible diagonals: 68.6 cm (27“) 16:9

Screen size: 597.9 mm x 336,3 mm

Dimensions (W x H x D) incl. monitor base: 642.0 mm x 437.9 mm x 209.8 mm

Dimensions box (W x H x D): 730 mm x 148 mm x 527 mm

Weight: ca. 6.2 kg (net)

Pixel size: 0.3114 mm x 0.3114 mm

Maximal resolution: 1920 x 1080 pixels

Electrical data

Video: analogue, positive, 0.7 VSS, 75 Ω

2 x digital HDMI 1.3 with HDCP vers, 1.3

Synchronisation: Separate H/V-sync.

Horizontal frequency: 31 kHz …. 82 kHz (VGA)

15 kHz …. 82 kHz (HDMI)

Refresh rate: 56 Hz …. 76 Hz (VGA)

23 Hz …. 61 Hz (HDMI)

Maximum pixel rate: 205 MHz (VGA), 255 MHz (HDMI)

Power supply: 100 V - 240 V, 50 Hz - 60 Hz

Total power consumption: < 40 W (active)

< 27 W in ECO-mode

< 1 W (stand by)

Audio: 2 x 3.0 W, digital output (optical S/PDIF)

Environmental conditions

Environment class 3K2, DIN IEC 721

Operating range:

Humidity:

15 °C .... 35 °C

20 % .... 85 %

Limit range:

Humidity:

5 °C .... 35 °C

20 % .... 85 %

Condensation must be avoided.

Preset operating modes

The picture position and size have been set to optimum values at the factory fort he operating modes listed above.

Resolution Refresh rate VGA Refresh rate HDMI

640 x 480 60/75 Hz 60 Hz

720 x 400 70 Hz

720 x 480 60 Hz

720 x 576 50 Hz

800 x 600 60/75 Hz 60 Hz

1024 x 768 60/75 Hz 60 Hz

1280 x 720 60 Hz 60 Hz

1280 x 800 60/75 Hz 60 Hz

1280 x 1024 60/75 Hz 60Hz

1366 x 768 60 Hz 60 Hz

1440 x 480 60 Hz i

1440 x 576 50 Hz i

1440 x 900 60/75 Hz 60 Hz

1600 x 900 60 Hz 60 Hz

1600 x 1200 60/75 Hz 60 Hz

1680 x 1050 60/75 Hz 60 Hz

1920 x 1080 60 Hz 50/60 Hz 50/60 Hz i

OSD-Beschreibung

Bedienung des OSD

Wenn Sie den Bildschirm das erste Mal in Betrieb nehmen, sollten Sie die Bildschirmanzeige optimal

an die verwendete Grafikkarte anpassen und Ihren Bedürfnissen entsprechend einstellen.

Bildschirmeinstellungen mit den Tasten

des Bedienfeldes ändern

Nach dem Einschalten und bei normalem Betrieb leuchtet nur die LED des Netzschalters auf

(grün = ECO „ein“, blau = ECO „aus“).

Netzschalter und

Anzeige(LED)

Nach dem Betätigen des Sensors leuchten die anderen LED`s auf und die Beschriftung der

Sensorschalter erscheint auf dem OSD.

I I__________I__________I___________I__________I

zum OSD Menu Hotkeys

Hotkey – Funktionen

ECO Modus

Bei der Betätigung des ECO-Schalters wird der ECO Modus abhängig von der vorhergehenden

Einstellung ein- oder ausgeschaltet.

Nach dem Einschalten des ECO Modus wird die Helligkeit auf den ECO Wert gesetzt, die Sensor

LED`s leuchten grün und folgende Einstellungen werden vorgenommen:

•Die Farbeinstellung wechselt auf 6500K (Voreinstellung)

•Der Office Mode wird eingeschaltet ( Voreinstellung )

•Hintergrundbeleuchtung wird auf die definierte ECO Helligkeit gestellt..

•Die Meldung „ECO ein” erscheint.

Wird im OSD die Helligkeit, Farbeinstellung oder die Mode-Einstellung verändert, wird der ECO

Modus ausgeschaltet und der entsprechende Status im Informationsfenster angezeigt. Nur bei einer

Änderung der Farbtemperatur von 6500K auf 7500K bleibt der ECO Modus eingeschaltet.

Wird der ECO Modus ausgeschaltet wechselt die Helligkeit auf Maximum oder auf den vor dem

Einschalten des ECO Modus eingestellten Wert und die Sensor LED`s leuchten blau auf.

Indice

Lingue:

Altri manuali Fujitsu Monitor

Fujitsu

Fujitsu P2410 Series Manuale utente

Fujitsu

Fujitsu Plasmavision P50XCA30WH Manuale utente

Fujitsu

Fujitsu P24T-7 LED Manuale utente

Fujitsu

Fujitsu 17inch Manuale utente

Fujitsu

Fujitsu P24W-7 LED Manuale utente

Fujitsu

Fujitsu SCALEOVIEW S17-2 Manuale utente

Fujitsu

Fujitsu B20T-6 Manuale utente

Fujitsu

Fujitsu Plasmavision PV42VCA30W Manuale utente

Fujitsu

Fujitsu Plasmavision P42VHA10E Manuale utente

Fujitsu

Fujitsu B27-9 TE FHD Manuale utente

Fujitsu

Fujitsu Plasmavision PDS4207E-H Manuale utente

Fujitsu

Fujitsu plasmavision Manuale utente

Fujitsu

Fujitsu B24W-5 ECO Manuale utente

Fujitsu

Fujitsu Plasmavision P42VHA10W Manuale utente

Fujitsu

Fujitsu SCENICVIEW A24W-3A Manuale utente

Fujitsu

Fujitsu E23T-6 Manuale utente

Fujitsu

Fujitsu Plasmavision P42HTS51E Manuale utente

Fujitsu

Fujitsu B17-5 ECO Manuale utente

Fujitsu

Fujitsu Plasmavision PDS4201U Manuale utente

Fujitsu

Fujitsu B32-9 TS UHD Manuale utente

Fujitsu

Fujitsu Plasmavision PDS4211 Manuale utente

Fujitsu

Fujitsu PLASMAVISION PDS4229W Manuale utente

Fujitsu

Fujitsu SCALEOVIEW Q26W-1 Manuale utente

Fujitsu

Fujitsu X23T-1 MHL Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione