Fujitsu Eternus DX80 S2 Manuale
ETERNUS
DX80 S2, DX90 S2,
DX410 S2 and DX440 S2
Initial Setup
Copyright Fujitsu Technology Solutions, Release August 2011
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 0
Connect FST to DX80 S2 / DX90 S2
Connect FST to DX400 S2
Initial Configuration of the FST
Initial Configuration Web GUI
Initial Wizard System Setup
Initial Manual Setup
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 Copyright Fujitsu Technology Solutions, Release August 2011
Content
1
Connect FST to DX80 S2 / DX90 S2
DX80 S2 and DX90 S2 systems have one MNT LAN port per
CM
The MNT port is shared for both the Field Engineer and customer
administration tasks
Connect the LAN cable of the Field Service Terminal (FST) to the port
labeled "MNT" at the Controller Module
•The "Master LED" of the respective CM lights in green
Copyright Fujitsu Technology Solutions, Release August 2011
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
MNT Port
Master LED
2
Connect FST to DX400 S2
DX400 S2 systems support a specific FST LAN port per CM
Connect the LAN cable of the Field Service Terminal (FST) to the port
labeled "FST" at the Controller Module
•The "Master LED" of the respective CM lights in green
Separate LAN port labeled "MNT" at each CM can be
connected to the customer LAN
Both ports can be used for Field Engineer as well as for customer
administration tasks
Copyright Fujitsu Technology Solutions, Release August 2011
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
FST Port
Master LED MNT Port
3
Initial Configuration of the FST
Connect the FST to the Master CM of the ETERNUS DX S2
system
The default IP address of the ETERNUS Manager GUI
•http://192.168.1.1/
Copyright Fujitsu Technology Solutions, Release August 2011
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
Web browser Internet Explorer 7.0/8.0 or later
Mozilla Firefox 3.6.x or later
LAN cable Straight cable or cross-linked cable (direct connection)
IP Address/Subnet mask
ETERNUS DX S2 Entry: MNT
ETERNUS DX S2 Midrange: FST
Factory default IP Address: 192.168.1.1
Factory Subnet mask: 255.255.255.0
IP address of the FST Select it within the same subnet of IP Address that is used for
the ETERNUS LAN Port (For example 192.168.1.20)
Caution Do not use a proxy server or cache (Temporary Internet Files)
JavaScript and Style Sheet must be enabled for the browser
4
Initial Configuration Web GUI (1)
To start the installation procedure, logon to the ETERNUS
DX S2 Web GUI using the standard User Account
User name: root
Password: root
Copyright Fujitsu Technology Solutions, Release August 2011
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 5
Initial Configuration Web GUI (2)
The opening screen giving a quick overview about the system
directly appears after log-in to the ETERNUS DX S2 Web GUI
Copyright Fujitsu Technology Solutions, Release August 2011
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
Status overview
of the system Global overview about
configured disk capacity
Global System
information
6
Indicator Colour Description
Green Each component is in normal status
Orange Component is under maintenance (self test)
Yellow Preventive maintenance is required for some components.
Pinned data is detected.
Red This status sign is displayed under the following conditions
Component failure is detected
Loop Down is detected
Red
This status sign is displayed under the following conditions
Abnormal status is detected at power on
Abnormal status is detected at power off, the system has not
started up normally
Error during restoration of the operating environment at power-
on
The system is abnormal
Initial Configuration Web GUI (3)
General status information of the ETERNUS DX S2 system
Copyright Fujitsu Technology Solutions, Release August 2011
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 7
Initial Configuration Web GUI (4)
Status information of each ETERNUS DX S2 component
Copyright Fujitsu Technology Solutions, Release August 2011
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
Indicator Colour Description
Green Each component is in normal status
Blue A component is installed but unused
Orange Component is under maintenance (self test)
Yellow Preventive maintenance is required
Red Component failure is detected
8
Initial Wizard System Setup (1)
The first Initial Setup Wizard
Setup the Storage System Name, Set Date & Time, Change Root
password
Feature registration
•Thin Provisioning, Advanced Copy and SED Authentication key
Set Network Environment and log out to activate the settings
Copyright Fujitsu Technology Solutions, Release August 2011
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2 9
Altri manuali per Eternus DX80 S2
11
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Fujitsu Server di archiviazione di rete
Manuali Server di archiviazione di rete popolari di altre marche
HP
HP NetStorage 6000 Manuale utente
Seagate
Seagate U10 ST320423A Manuale utente
Synology
Synology RackStation RS816 Manuale
D-Link
D-Link ShareCenter Pro DNS-1200-05 Manuale utente
Avid Technology
Avid Technology VideoRAID ST Guida di sicurezza
Western Digital
Western Digital My Cloud Home Duo Manuale utente
