Fujitsu eternus af Manuale utente
FUJITSU Storage
ETERNUS DX, ETERNUS AF
Configuration Guide -Server Connection-
(Fibre Channel) for Citrix® XenServer®
P3AM-4572-19ENZ0
This page is intentionally left blank.
Preface
This manual briefly explains the operations that need to be performed by the user in order to connect an
ETERNUS DX/AF to a server running Citrix® XenServer® via a Fibre Channel interface.
This manual should be used in conjunction with any other applicable user manuals, such as those for the
ETERNUS DX/AF, server, OS, Fibre Channel cards, and drivers.
Refer to "Configuration Guide -Server Connection- Notations" for the notations used in this manual such as
product trademarks and product names. For storage systems that are supported by the OS, refer to the Server
Support Matrix of the ETERNUS DX/AF.
19th Edition
December 2017
The Contents and Structure of this Manual
This manual is composed of the following nine chapters.
•"Chapter 1 Workflow" (page 8)
This chapter describes how to connect the ETERNUS DX/AF storage systems to a server running Citrix® Xen-
Server®.
•"Chapter 2 Checking the Server Environment" (page 11)
This chapter describes which servers can be connected to ETERNUS DX/AF storage systems.
•"Chapter 3 Notes" (page 12)
This chapter describes issues that should be noted when connecting the ETERNUS DX/AF storage systems
and server.
•"Chapter 4 Checking Fibre Channel Card Information" (page 14)
This chapter describes the Fibre Channel card WWNs that are required for ETERNUS DX/AF settings and Fi-
bre Channel switch settings.
•"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 15)
This chapter describes how to install ETERNUSmgr.
•"Chapter 6 Setting Up the ETERNUS DX/AF" (page 16)
This chapter describes how to set up an ETERNUS DX/AF.
•"Chapter 7 Setting Up the Fibre Channel Switches" (page 17)
This chapter describes how to set up the Fibre Channel switches.
•"Chapter 8 Setting Up XenServer" (page 19)
This chapter describes how to set up Citrix® XenServer®.
•"Chapter 9 SAN Boot" (page 30)
This chapter provides notes for SAN Boot.
3
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix® XenServer®
Copyright 2017 FUJITSU LIMITED
P3AM-4572-19ENZ0
Naming Conventions
■Citrix XenServer Terminology
•Storage Repository (SR)
A container where virtual disk images are stored
•Virtual Disk Image (VDI)
A storage abstraction that is presented to a Virtual Machine
The fundamental unit of virtualized storage in XenServer
•Physical Block Device (PBD)
An interface between a physical server and a Storage Repository
A connector object to map a Storage Repository to a XenServer host
•Virtual Block Device (VBD)
A connector object to map between VDIs and VMs
•Virtual Machine (VM)
A virtual machine that is created on XenServer (Guest OS)
■Fibre Channel card names
Refer to "Server Support Matrix" to check the Fibre Channel cards.
•"Fujitsu Emulex Fibre Channel cards" refers to Fibre Channel cards with the following product IDs.
-PG-FC105
-PG-FC106
-PG-FC107
-PG-FC201
-PG-FC202/PG-FC202L
-PG-FC203/PG-FC203L
-PG-FC204/PG-FC204L
-PG-FCD201
-PG-FCD202
-MC-0JFC31/MCX0JFC31/MC-0JFC3L
-MC-0JFC91/MCX0JFC91/MC-0JFC9L
-MC-0JFC41/MCX0JFC41/MC-0JFC4L
-MC-0JFCA1/MCX0JFCA1/MC-0JFCAL
-MC-0JFC71/MCX0JFC71
-MC-0JFC72/MCX0JFC72/MC-0JFC7L
-MC-0JFC81/MCX0JFC81
-MC-0JFC82/MCX0JFC82/MC-0JFC8L
-MC-0JFC11/MC-0JFC1L
-MC-0JFC21/MC-0JFC2L
-MC-08FC11/MC-08FC71
-MC-08FC31/MC-08FC41
Preface
4
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix® XenServer®
Copyright 2017 FUJITSU LIMITED
P3AM-4572-19ENZ0
-MC-08FC51/MC-08FC61
-MC-08FC81/MC-08FC91
-S26361-F2624-E1
-S26361-F2843-E1/S26361-F2843-E201
-S26361-F3141-E10/S26361-F3141-E210
-S26361-F3141-E1
-S26361-F3306-L1/S26361-F3306-L201
-S26361-F3961-L1/S26361-F3961-L201
-S26361-F3961-L2/S26361-F3961-L202
-S26361-F3306-E601/BX600-FC42E
-MC-FC82E
•"Fujitsu QLogic Fibre Channel cards" refers to Fibre Channel cards with the following product IDs.
-PG-FCD101
-PG-FCD102
-PG-FC205/PG-FC205L
-PG-FC206/PG-FC206L
-S26361-F3023-E1
-S26361-F3631-L1/S26361-F3631-L201
-S26361-F3631-L2/S26361-F3631-L202
Preface
5
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix® XenServer®
Copyright 2017 FUJITSU LIMITED
P3AM-4572-19ENZ0
Table of Contents
Chapter 1 Workflow 8
Chapter 2 Checking the Server Environment 11
2.1 Servers ......................................................................................................................................... 11
2.2 Fibre Channel Switches................................................................................................................. 11
2.3 Fibre Channel Cards...................................................................................................................... 11
2.4 Connection Compatibility of ETERNUS DX/AF Storage Systems to XenServer Host......................... 11
2.5 Virtual Machine............................................................................................................................ 11
Chapter 3 Notes 12
3.1 Installation Notes......................................................................................................................... 12
3.2 Operating Notes ........................................................................................................................... 12
3.3 ETERNUS DX/AF Setup Notes......................................................................................................... 12
3.4 Server Startup and Power Supply Control Notes............................................................................ 13
Chapter 4 Checking Fibre Channel Card Information 14
Chapter 5 Installing and Setting Up ETERNUSmgr 15
Chapter 6 Setting Up the ETERNUS DX/AF 16
Chapter 7 Setting Up the Fibre Channel Switches 17
Chapter 8 Setting Up XenServer 19
8.1 Setting Up the Fibre Channel Cards .............................................................................................. 19
8.1.1 For PRIMERGY .....................................................................................................................................................19
8.1.2 For Fujitsu Emulex Fibre Channel Cards ..............................................................................................................19
8.1.3 For Fujitsu QLogic Fibre Channel Cards ...............................................................................................................21
8.2 Turning On the Devices ................................................................................................................ 23
8.3 Checking LUN Status .................................................................................................................... 24
8.4 Creating a Storage Repository ...................................................................................................... 25
8.5 Setting the Multipaths ................................................................................................................. 25
6
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix® XenServer®
Copyright 2017 FUJITSU LIMITED
P3AM-4572-19ENZ0
Chapter 1
Workflow
This chapter describes how to connect the ETERNUS DX/AF to a server running Citrix XenServer. The workflow
is shown below.
Required Documents
•"Server Support Matrix"
•"Server Support Matrix for FC-SWITCH"
•"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETERNUS DX/AF
to be connected
•"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"
•"ETERNUS Web GUI User's Guide"
•"ETERNUSmgr Install Guide"
•"ETERNUSmgr User Guide"
•Manuals supplied with the Fibre Channel card and software
Workflow
Checking the Fibre Channel Card Information
Obtain the WWN information of the Fibre Channel card.
•"Chapter 4 Checking Fibre Channel Card Information" (page 14)
8
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix® XenServer®
Copyright 2017 FUJITSU LIMITED
P3AM-4572-19ENZ0
Installing and Setting Up ETERNUSmgr
If ETERNUSmgr is to be used, install it and set up the ETERNUS DX/AF.
•"Chapter 5 Installing and Setting Up ETERNUSmgr" (page 15)
•"Chapter 6 Setting Up the ETERNUS DX/AF" (page 16)
•Checking the setup and maintenance operations
-"ETERNUS Web GUI User's Guide"
•Installing ETERNUSmgr
-"ETERNUSmgr Install Guide"
•Checking the ETERNUSmgr operational procedures
-"ETERNUSmgr User Guide"
•Setting up the ETERNUS DX/AF
-"Configuration Guide -Server Connection- Storage System Settings" that corresponds to the ETER-
NUS DX/AF to be connected
Setting Up the Fibre Channel Switches
If a Fibre Channel switch is to be used, set it up now.
•"Chapter 7 Setting Up the Fibre Channel Switches" (page 17)
•Setting up the Fibre Channel switches
-"Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings"
•Checking the Fibre Channel switch connection requirements
-"Server Support Matrix for FC-SWITCH"
Setting Up XenServer
Set up XenServer to connect to the ETERNUS DX/AF.
•"Chapter 8 Setting Up XenServer" (page 19)
•Setting up XenServer and the Fibre Channel card
-"8.1 Setting Up the Fibre Channel Cards" (page 19)
•Checking the Fibre Channel card driver versions
-"Server Support Matrix"
Chapter 1 Workflow
9
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix® XenServer®
Copyright 2017 FUJITSU LIMITED
P3AM-4572-19ENZ0
Checking the LUNs
Check whether the server recognizes the LUNs of the ETERNUS DX/AF and set up the LUNs so that they
can be used on XenServer.
•"8.3 Checking LUN Status" (page 24)
Creating a Storage Repository
Create a Storage Repository.
•"8.4 Creating a Storage Repository" (page 25)
Setting the Multipaths
Use the XenServer multipath to perform a redundant configuration.
•"8.5 Setting the Multipaths" (page 25)
Chapter 1 Workflow
10
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix® XenServer®
Copyright 2017 FUJITSU LIMITED
P3AM-4572-19ENZ0
Altri manuali per eternus af
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Fujitsu Magazzinaggio
Fujitsu
Fujitsu ETERNUS Multipath Driver V2 Manuale utente
Fujitsu
Fujitsu ETERNUS DX60 S3 Manuale utente
Fujitsu
Fujitsu MAM3184MC/MP Manuale utente
Fujitsu
Fujitsu ETERNUS DX60 S2 Manuale utente
Fujitsu
Fujitsu Eternus DX80 S2 Manuale utente
Fujitsu
Fujitsu MHA2021AT Manuale utente
Fujitsu
Fujitsu MHX2300BT - Mobile 300 GB Hard Drive Manuale utente
Fujitsu
Fujitsu MBC2036RC SERIES Manuale utente
Fujitsu
Fujitsu ETERNUS DX100 S3 Manuale utente
Fujitsu
Fujitsu MPE3XXXAE Manuale utente
Fujitsu
Fujitsu MPF3XXXAT Manuale utente
Fujitsu
Fujitsu P3AM-5382-03ENZ0 Come usare
Fujitsu
Fujitsu ETERNUS DX S5 Series Manuale utente
Fujitsu
Fujitsu DYNAMO 640AI Manuale utente
Fujitsu
Fujitsu ETERNUS DX60 S3 Manuale utente
Fujitsu
Fujitsu MAV2036RC - 36.7 GB Hard Drive Manuale utente
Fujitsu
Fujitsu PRIMERGY LTO2 Manuale utente
Fujitsu
Fujitsu ETERNUS DX Disk Manuale utente
Fujitsu
Fujitsu MHX2300BT - Mobile 300 GB Hard Drive Manuale utente
Fujitsu
Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS... Manuale utente
